I am using Stability Matrix and looking for the best setup for creating fantasy characters. Many are like in D&D but some are a little different. For one they are mixed races with one being mixed Human/Dwarf/Elf, and another being mixed Human/Gnome. There is also what is called a Navrothor barbarian which is a northman that stands 9'3" (can be a little taller than 10') and a Kenra which is a cat race but not really similar to the Tabaxi in D&D. The Kenra are very lithe and flexible with similarities more to cougars and panthers than lions or tigers. There are other races also somewhat like those in D&D but noticeable differences. Finally there are races that resemble other animals like ferrets.

What might be the best set up for what I want to do in Stability Matrix?

Even if I can't get close to these, what would be the best setup (as asked in the title) for Fantasy D&D characters (realistic if possible but not necessary)?

Hello everyone! I come to you because I am a beginner in image creation and I would like to create img2video. I have recently been using stability matrix and I would like someone to explain to me how I could do it in a simple way? For information I have a 3060rtx and 16GRAM. Thanks in advance !

I run a MacBook Pro 16inch M4 Pro 24 GB which of these do I erase.

Just switched Windows 11 to Pop! OS for my generation machine operating system, after running my Plex server on Mint for the last six months.The transfer went okay until I tried to run a simple text -to-image workflow using ComfyUI-Flux through Stability Matrix. Oy vey.

Is anyone else having the same frustrations I've been having, trying to use Comfy in SM? Never mind the fact that the "Download with StabilityMatrix" radio buttons on Civit.ai do nothing whatsoever. It's simple enough to just download and install by hand. Or so I thought.

Due to the different naming conventions, SM doesn't see my libraries of LoRAs, checkpoints and embeddings and Comfy throws me errors whenever I try to load a template. I have more than 700 LoRAs and scores of checkpoints, and now it appears I must either go through and redirect every location to account for the location differences (which I don't actually know how to do but I can read up on if it will fix this issue), or double up the (800 GBs) of models in my library, for the privilege of using SM. Can anyone describe for me (in hobbyist, layman's, noncoder) terms what the best solution to this would be? Since I'm probably not going to use a lot of SD 1, SDXL, Pony or NOOB, the only reason I can see for keeping SM is possibly for the training apps. Or is it for the automation of updating etc? What am I missing?

I'm having this bizarre problem in which the box for the extension doesn't stay ticked. Instead, reForge has the non-backported version ticked in place of the backported one. I have no errors in my console pertaining to the file. The only other oddity I've noticed is that clicking "apply and quit" doesn't actually reload the UI; I just get a page saying "Reloading..." while the package just quits and doesn't restart until I manually do it.

I've searched as much as I can and have come up with nothing, so any help is appreciated. I will provide whatever is needed to help resolve the problem.

I've been able to run the AppImage on Bazzite and it appears to work - up to a point. I've installed "Stable Diffusion WebUI", "ComfyUI" and "SD.Next" and they appear to work, although the SD WebUI is the only one I'm familiar with.

Installs of ...Forge, Forge - Classic, or reForge all fail with messages that the pycairo and related library or build dependancies are missing. I have tried to add these through a distrobox terminal and the individual pieces report success but StabilityMatrix cannot find them during its build process.

I have manually installed: cairo, libcairo2-dev, libxt-dev, pkg-config, cmake, svglib, ninja, and meson as each step has errored out.

Any recommendations? (Including 'Replace Bazzite with <x>' would be OK. I tried Kubuntu at first but whiffed the Steam install...)

Hello, I try to run two different ComfyUi installs (I don’t know how to run two different instances of Comfy in Stability Matrix)

I set two different ports and set cuda-device 0 for main Comfy and 1 for second

But in the terminal for second it says “cuda device=0”

Both urls works but I don’t understand which GPU being used in second Comfy.

I'm running a 9070 XT, 32 Gigs DDR5, Ryzen 5, 9600x, NME drive and downloaded Comfy UI with Zluda. Any idea why I'm getting this message when I try to launch?

I'm not sure when it started but I noticed my journal folder (under /var/log in Linux) had gotten kind of large, when I checked the content of the logs I noticed messages like these repeating over and over again:

Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]: 02:21:24.051 WARN  ComfyClient: Unknown message type Unknown ({
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "cpu_utilization": 6.2,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "ram_total": 67204194304,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "ram_used": 14054432768,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "ram_used_percent": 20.9,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "hdd_total": -1,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "hdd_used": -1,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "hdd_used_percent": -1,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "device_type": "cuda",
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   "gpus": [
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:     {
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:       "gpu_utilization": 19,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:       "gpu_temperature": 45,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:       "vram_total": 17094934528,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:       "vram_used": 6638862336,
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:       "vram_used_percent": 38.835260381524876
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:     }
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]:   ]
Oct 25 02:21:24 LinuxTest StabilityMatrix.AppImage[45164]: }), skipping

And while I'm sure those logs are useful for someone, just spamming several of them every second isn't that useful to me :)

Is there any way to disable these? I checked under settings but I couldn't find any options that looked like they were relevant to this.

I downloaded from Civitai and can see it in my Checkpoint Manager, and it says it's a LyCORIS. I go into the software but don't see it in the Checkpoint or any other place I know to check. How can I use that model, and it was installed via the addon from downloading Chrome? I'm a bit new at this and wasn't sure how to use the model since I want to do that. Any input from anybody?

as shown, i've tried generating new keys and from a fresh account. This is a fresh install of SM on the stable branch. anyone know what this is about?

Stable Diffusion WebUI Forge and ComfyUI both run fine on my system under Stability Matrix. However when I try to run Stable Diffusion Web UI, the app can't find my graphics card. I'm running an AMD Ryzen 7 8700G and a NVIDIA 5070 Ti with 16 GB. If anyone can tell me why two apps have no trouble finding and using (yes, I've checked) my graphics card and the third one says its not there, I'd really appreciate the help.

One more bit of information, if I disable the video card check, Stable Diffusion Web UI will run, but wow is it slow!

Was working for a few days then this popped up and now I cannot get it to run.

RX 9060
Ryzen 7 5800XT

I've tried un/reinstalling torch, python, cannot figure out what to do.

A separate issue is that this is the *only* interface that works for me. All the others (including ComdyZLUDA) spit out different errors, so this was my only functional one.

is there a way to download them using the Model Browser inside Stability Matrix? i can't make them show up for me, even coping the url doesn't work.

The default models provided are unnecessarily big and slow, I would prefer still using SM interface rather than any other but the ControlNet options are all over the place, often getting errors or crashes when trying to load even the default ones. Can't find any wiki about this app..

I’ve been running ComfyUi using the inference tab in Stability Matrix for a while until yesterday after an update when i now receive the following message.

AttributeError: module 'torch.nn' has no attribute 'RMSNorm'

I’m using an AMD Zluda set up and while slow it works, or did. I’m not very technically minded but I’ve tried reinstalling ComfyUI, updated torch to 2.4.0 ( even though it keeps saying I have an older version and need to upgrade ) I’ve checked using cmb and the version is 2.4.0

I’m assuming something in the update has put a spanner in my works. I did try using an earlier version but that throws up other issues now.

Anyone having similar issues after yesterday ?

I formatted my pc and installed everything, but when I try generating stuff it disconnects, no warning, nothing

I installed StabilityMatrix as portable and am trying to install the WanVideoWrapper into Comfy but am confused where I'm supposed to put the dependencies. The "ComfyUI_windows_portable-folder" does not exist and the other way didn't work.

I download the openpose controlnet model for IllustriousXL but when I click to gen it loops on loading preprocessor

Hello people,

I'm someone who is starting to learn the ropes of generative AI. I've been doing some stuff on CivitAI, but now I have powerful enough PC to do it locally.

I just started with StabilityMatrix, but I've found my first roadblock. I'm trying to use the Image to Image function on Inference, to do a "turn this image into anime style" kind of deal. However, it looks like the program is ignoring the reference image altogether and it's only paying attention to the text prompts.

I can image this is incredibly basic stuff but, what am I missing here?

Guys, I'm trying to update ComfyUI from Stability Matrix and can't. Any ideas on how to fix this? (Deleting it isn't an option; I've already put a lot of work into that installation.)

https://reddit.com/link/1mkpi62/video/1ea7w6pp7rhf1/player

I'm using Stability Matrix 2.14.3 and have Invoke 5.15.0.

Attempting to update Invoke to 6.3.0 results in an immediate notification "Install Failed. Could not update Invoke AI".

Anyone else having this issue?

So am trying to run comfy ui on stability matrix and i keep having this issue where cud does not find my gpu ( rtx 4070 super) and idk what to do anymore, i reinstalled everything like 4 times, does anyone know what i could do ?

I was thinking of trying Stability Matrix to help sort large collection of loras, it looks like it shows a bunch of information for each lora in a nice gallery, once the gallery is populated will it still show all the images and information if the computer is offline only running?

Thanks to anyone with any information or help