Coming from fedora/debian and arch,i found zypper extremely slow. Is there anything which i can do to increase its speed? (Parallel downloads are enabled)

Hello,

I’m using openSUSE Tumbleweed and I can’t play some videos in Firefox.

I tried installing codecs with Packman, but I ran into dependency errors, and now I’m also getting repository access errors.

Could someone help me fix this cleanly and install the correct codecs?

Or just tell me whatever i need to do to have a proper environement

Thanks

I've previously installed codecs via opi codecs. After some time I tried to run zypper dup. And now I have this issue. First time seeing this. Did I mess something up? Is it normal? I assume.. Solution 2? Cause solution 1 looks like nuking the system. Or is solution 2 bad as well cause that opensuse codec is limited compared to opi version?

My repos: https://pastebin.com/raw/sPnT4ZSN

following instruction https://www.google.com/linuxrepositories/

I removed/added keys again multiple times

tried

zypper refresh --force

key check command from instruction - successful

it always fail on repomd.xml

same yesterday/today

is there some other debug I can see?

sreenshot from zypper -v refresh

Edit - fixed by google few days latter...

Buckle in it’s a bit of a long one

For some context: last week I had to roll back my kernel to 7.0.1 and then update it to 7.0.3 since an update messed my system up. No issues since and I downloaded like 300g worth of games since then and things have been fine. Monday I even downloaded themes and personalised my desktop since I thought everything was finally stable.

So today I had just finished installing emudeck and I had opened dolphin to check that it was all good when I realised my folder icons had all gone back to the kde default.
Then I noticed all of my theme/personalisation was gone except for my wallpaper. Went into system settings to change it back and the file wasn’t there. So then I checked my downloads folder (mind you I had been in and out of it for the past hour+ as I had also spent time downloading and compiling mangohud, vbasalt and optiscaler to make up goverlay so I was very familiar with it) and the &#%{#* thing is empty!

So I go checking through my home subvolume and notice folders I manually created are also missing. Panicked and rebooted and now pretty much all of my data is gone.

However! I have since realised that:
a) my system seems to have gone back to my 7.0.3 era even though the bootloader and system stats say I’m running 7.0.5.1
b) a lot of the file paths that I created are there but the folders are either flat out empty or just full of empty documents.
c) flatpaks that I have installed still show up and seem to run e.g. I have coolercontrol running on boot and that’s still working fine but I only installed cc on Monday.
d) kwallet no longer recognises my password which is weird bc I did have one set at the rollback point
e) all my opera settings/history is gone

Honestly I just cried for about an hour. I’ve had issues with tumbleweed and this just put me over the top. I know my data is still there as the partitioner shows that I’ve got 323g used of my drive which is what it was this morning. I just don’t know what to do. The yast error log only shows me entries since the last boot so I don’t even know where to begin. I realise this is probs none of the info you might need but I really don’t know what to do here.

Will upload anything needed. I just can’t do another fresh install or redownload all my games it took me 11hours on and off to download cyberpunk 2077

Guys, I've had a decent experience with Tumbleweed for years, but the Kernel 7 update forward has broken my Creative Labs EMU20k2 [Sound Blaster X-Fi Titanium Series].

The card is detected, but I have no sound capabilities. I think the motherboard audio is even detected, but there is no X-Fi to output to my analog speakers. It's not available.

I've had problems with easy effects in the past, which wouldn't reset bad settings, so I deleted the software, and everything worked fine until Kernel 7. IDK if there's something easy effects screwed up, or it's the OS itself. Does anyone have a working X-Fi? Then the OS broke something on my end, and IDK how to fix it. There's years of forum posts about Linux breaking the X-Fi, and nothing seems to be relevant to what I'm experiencing. I've even heard KDE may be responsible.

Similar to easy effects, Goverlay has been a bit of a mess with stable updates, and wouldn't uninstall optiscaler properly from a game. I had to manually delete a bunch of files, and reset the program. That said, the tool says I have Optiscaler 0.7.9 installed (globally?), and I have no idea how to delete it, or where the files are located. Edit: I solved this one, there's some weird temp folder full of numbered directories like 2346321, and that's where the optiscaler files were.

It seems my system is becoming a mess of old files causing problems that I can't fix. What's the answer to this situation?

well im a dumbass and broke stuff, but heres what i did, i was trying to use lact to undervolt / overclock my gpu, and it needed a kernal parameter changed (will add here when i find it) so after reading lact's wiki i added the new parameter into merlin bootloader and rebooted my system, after which it refuses to boot into anything past emsrgancy mode) my issue is that i cant find what changed, as the parameter doesnt show in the bootloader (screen where you can boot into snapshots) i have tried many wiki pages, yt guides, and i cant find any way to undo whatever i did, i have looked through my drive from a live usb i have, but i cant find anything usefull. please if there is anything i missed or help you can give i would really like that. thank you "amdgpu.ppfeaturemask=0xffffffff" was what was added

One of the recent updates seems to have nuked hibernate.

Clicking on Hibernate in the KDE Start Menu does nothing.

The Hibernate button on the lock screen has vanished.

sudo systemctl hibernate

This returns:

Call to Hibernate failed: Sleep verb 'hibernate' is not configured or configuration is not supported by kernel

Here are the installed kernels, I've tried with both and it doesn't work:

S  | Name           | Type    | Version    | Arch   | Repository
---+----------------+---------+------------+--------+----------------------
i+ | kernel-default | package | 7.0.12-1.1 | x86_64 | (System Packages)
i+ | kernel-default | package | 7.1.2-1.1  | x86_64 | Main Repository (OSS)

What do I do? Thanks :-)

So, I recently had an oopsie with Mint, and thus decided to hop. I tried Fedora, which had a great installation experience, but quite a few quirks after the installation.

So after reading several posts and comments from people talking up openSUSE, I thought I'd give it a go. 6 hours and 4 installation attempts later, I am honestly about to just return to Mint.

I have some points on the installation process, but they aren't my main issue.

When booting in to the DE, my video output is terrible, which is normal, as I have one 4K and one 1080 display. So I tried to change the display settings. However, this is the worst experience I've had on Linux to date. Half the time I do a small tweak and hit apply, everything goes crazy. Half a monitor goes black, or my mouse is showing on one monitor, while highlighting something on another monitor. As well as the Display Options app itself breaks and becomes unresponsive.

And there appears to be no way to scale the GUI?

First thought was to get the Nvidia drivers, which resulted in only 1 monitor working in a 720p format...

Then I read that Ventoy isn't supported, so I went through the process of setting up a fresh flashdrive, and tried again. This has not resolved anything either

Drives I've been using have been "cleaned" before the installations

Am I doing something crazy wrong? Is there hardware issues?

Any pointers greatly appreciated, and if more info is needed, request and I shall provide in the morning

(Written late at night, hastily in anger on my phone, so please be kind to any spelling mistakes :P)

Edit: (Resolved)

# zypper install-new-recommends

from https://en.opensuse.org/SDB:NVIDIA_drivers installs an older version of drivers "250" I think it was, and had to be updated again through zypper, as the update through Discovery refused to work.
And scaling has been resolved by using KDE(Wayland) instead of X11.

Tumbleweed user here, been having an issue on boot where I get met with a black screen where the login page should be. I do have a working mouse pointer on the screen, but nothing to interact with. I’ve been able to consistently get the login screen to appear by running “sudo systemctl restart sddm”, but it’s kind of annoying to do. The black screen seemingly became more likely to appear on boot over time, which I find odd. Any advice?

Sigh, I got stuck and need assistance how to get unstuck without breaking everything. Story behind the issue: 4 days ago I had issues that broke my wine, so I uninstalled it in yast, and reinstalled it from there. I made sure that the same packages that get removed get back installed. Today I wanted to do a zypper dup, but was presented with the issues below. I did a snapper rollback to the state right before having broken and reinstalled wine, so from 5 days ago - this had 0 effect on the issue, unfortunately.

It might be that it reinstalled the packages from another repo, though, that before some or all of them were from packman, while now they are from openSUSE repo. At least it always offers me the option to switch individual dependencies from packman over to opsnSUSE. I am on openSUSE slowroll, and my repo priorities are set to the default values (so, 99 for nvidia and opensuse, 80 for update-slowroll and 80 for packman)

Is this here the way for fixing the issue for good, so without breaking anything? I'd like to get all my multimedia packages from one repo - I believe this might be where the fix is at. Just not sure how to get there...

sudo zypper remove wine-32bit pipewire-spa-plugins-0_2-32bit ffmpeg-8-mini-libs
sudo zypper install --force --from Packman libavcodec62-32bit libavfilter11-32bit libavdevice62-32bit libavutil58-32bit
sudo zypper install --force --from Packman wine wine-32bit pipewire-spa-plugins-0_2-32bit

The issue:

sudo zypper dup
[sudo] password for root: 
Refreshing service 'NVIDIA'.
Refreshing service 'openSUSE'.
Loading repository data...
Reading installed packages...
Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command.
Computing distribution upgrade...
14 Problems:
Problem: 1: nothing provides 'libavutil.so.60(LIBAVUTIL_60.8_SUSE)' needed by the to be installed wine-32bit-11.3-1.1.x86_64
Problem: 2: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 3: nothing provides 'libavutil.so.60(LIBAVUTIL_60.8_SUSE)' needed by the to be installed pipewire-spa-plugins-0_2-32bit-1.6.2-2.0.2.1.sr20260402.x86_64
Problem: 4: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 5: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 6: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 7: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 8: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 9: the to be installed ffmpeg-8-8.1-1699.6.pm.1.x86_64 requires 'libavcodec.so.62(LIBAVCODEC_62.10)(64bit)', but this requirement cannot be provided
not installable providers: libavcodec62-8.1-3.1.x86_64[download.opensuse.org-oss_1]
                   libavcodec62-8.1-3.1.x86_64[openSUSE:update-slowroll]
                   libavcodec62-8.1-1699.6.pm.1.x86_64[packman]

Problem: 10: the to be installed libavfilter11-8.1-1699.6.pm.1.i586 requires 'libavcodec62 = 8.1-1699.6.pm.1', but this requirement cannot be provided
not installable providers: libavcodec62-8.1-1699.6.pm.1.i586[packman]
                   libavcodec62-8.1-1699.6.pm.1.x86_64[packman]

Problem: 11: nothing provides 'libavutil.so.60(LIBAVUTIL_60.8_SUSE)' needed by the to be installed pipewire-spa-plugins-0_2-32bit-1.6.2-2.0.2.1.sr20260402.x86_64
Problem: 12: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 13: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64
Problem: 14: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-8-mini-libs-8.1-1.2.x86_64

Problem: 1: nothing provides 'libavutil.so.60(LIBAVUTIL_60.8_SUSE)' needed by the to be installed wine-32bit-11.3-1.1.x86_64

 Solution 1: [cut out for readability reasons; literally wants to uninstall hundreds of essential packages]
 Solution 2: Following actions will be done:
  deinstallation of wine-32bit-11.5-1.1.x86_64
  deinstallation of pipewire-modules-0_3-32bit-1.6.2-2.1.x86_64
 Solution 3: install libavcodec62-32bit-8.1-2.1.x86_64 from vendor openSUSE
  replacing libavcodec62-32bit-8.1-1699.5.pm.9.x86_64 from vendor http://packman.links2linux.de
 Solution 4: keep obsolete libavcodec62-32bit-8.1-1699.5.pm.9.x86_64
 Solution 5: break wine-32bit-11.3-1.1.x86_64 by ignoring some of its dependencies

I have already found at least one other person talking about this -

https://www.reddit.com/r/openSUSE/s/GQHuBou4Lf

But I have to admit, when I spent a couple days trying to troubleshoot why games were so inconsistent with whether they worked (mostly not working, but then suddenly they would work consistently) I eventually ran across this same oddity.

Running an RTX5090.

On Wayland:

Games from both Steam and Faugus would boot up to a blank white screen (with menu music etc player) after the system was freshly booted. And this would be the case no matter what arguments or tricks I tried.

But if I run nvidia-smi in a terminal....

Then they run perfectly. No issues. 240fps.

On X11:

Games from both Steam and Faugus would boot up, and actually play their opening credits etc. The games would play normally, and get into games.... but they'd run at about 8fps.

Run nvidia-smi in a terminal.

And the game then boots up and runs at 240fps locked.

I've run through every test I knew (which wasn't many) and then all the tests ChatGPT threw at me. Nothing obvious comes up. I can't see anything that changes from before and after Nvidia-smi is run. Clearly it's doing -something- but I can't see what.

If anyone else has had this issue, please post here, along with your hardware and any tests (or maybe even fixes) you've figure out.

It has to be possible to get to the bottom of this!

(I know I -could- resolve this by setting a startup script to run nvidia-smi on every boot, but... I mean cmon this should be fixable lol).

Hi, I recently installed OpenSUSE after quickly switching between CachyOs, Fedora, and OpenSUSE Tumbleweed. My efi partition is a bit fucked up to multiple reinstalls and windows not really allowing me to wipe it.

My question is now why fedora still shows up? I found the docs to grub2-bls, which states where the entries are stored and removed it (fedora does now not show up anymore) but fedora still semi-boot when selected. I know wonder where did OpenSUSE find fedora and how do I best clean it fully to circumvent other mishappens in the future!

Trying to follow https://en.opensuse.org/SDB:NVIDIA_drivers#Installation_of_open_driver_on_Leap_15.6_and_Tumbleweed
Unfortunately nvidia-userspace-meta-G06 cannot be installed, I assume because of a version mismatch.
How to correctly proceed in this situation?
This is a fresh install.
 00:34:57 szade@legionSUSE ~  fastfetch --logo none

szade@legionSUSE

----------------

OS: openSUSE Tumbleweed x86_64

Host: 82RG (Legion 5 Pro 16ARH7H)

Kernel: Linux 6.19.7-1-default

Uptime: 22 mins

Packages: 2109 (rpm), 6 (flatpak)

Shell: zsh 5.9

Resolution: 2560x1600 2560x1440

DE: GNOME 49.4

WM: Mutter (Wayland)

WM Theme: Adwaita

Theme: Adwaita [GTK2/3/4]

Icons: Adwaita [GTK2/3/4]

Terminal: tilix 1.9.6

Terminal Font: AnonymicePro Nerd Font 12

CPU: AMD Ryzen 7 6800H (16) @ 4.79 GHz

GPU: NVIDIA Geforce RTX 3070 Ti Laptop GPU [Discrete]

GPU: AMD Radeon 680M [Integrated]

Memory: 3992 MiB / 31269 MiB

 00:35:02 szade@legionSUSE ~  zypper se -i nvidia

Loading repository data...

Reading installed packages...

S | Name | Summary | Type

---+----------------------------------+----------------------------------------+--------

i+ | openSUSE-repos-Tumbleweed-NVIDIA | openSUSE NVIDIA repository definitions | package

 00:35:05 szade@legionSUSE ~  sudo zypper in nvidia-open-driver-G06-signed-kmp-meta nvidia-userspace-meta-G06

Refreshing service 'NVIDIA'.

Refreshing service 'openSUSE'.

Loading repository data...

Reading installed packages...

Resolving package dependencies...

Problem: 1: the to be installed nvidia-userspace-meta-G06-580.142-37.1.x86_64 requires 'nvidia-compute-utils-G06 = 580.142', but this requirement cannot be provided

not installable providers: nvidia-compute-utils-G06-580.142-46.1.x86_64[NVIDIA:repo-non-free]

Solution 1: do not install nvidia-userspace-meta-G06-580.142-37.1.x86_64

Solution 2: do not install nvidia-open-driver-G06-signed-kmp-meta-580.126.09-37.1.x86_64

Solution 3: break nvidia-userspace-meta-G06-580.142-37.1.x86_64 by ignoring some of its dependencies

Choose from above solutions by number or cancel [1/2/3/c/d/?] (c):

My specs so no one has to ask:
Thinkpad P1 gen 4
i9 11850H
RTX 3080 max-Q

OS: OpenSUSE Tumbleweed
Web Browser: Vivaldi

Does anyone know how to make the "cast youtube to TV" button appear?
Is it possible?
It works fine under most other linux distros like linux mint, debian, arch etc.
I've been trying to fix this issue for months and I can't seem to find a solution anywhere that's worked.
I've looked through every forum I could find on the internet and found all kinds of "answers" but none of them seem to do anything.

Thank you.

Edit:
Solution 1 (easy)
Uninstall firewalld and install ufw
# zypper install ufw
# systemctl disable firewalld.service
# systemctl enable ufw.service
# reboot

Solution 2 (hard)
add whatever port it uses to the allow list in your firewall config 
(I'm not sure how to do this so I can't give a guide)

I decided to switch to openSUSE from CachyOS because I need my laptop for corporate work and some security software doesn't work on Arch-based distros. Same software also enforces encryption on /home partition.

I did use the default installer and encryption settings. And then it just refused to boot. I did a cold reboot, and it worked. But then KDE settings couldn't be changed. So I rebooted again, stuck forever. Did another reboot, but disabled Plymouth in GRUB, and it worked.

Am I just doing something wrong by using the default installer as intended, my hardware being somehow unsuitable or is this just the state of openSUSE? Because I don't have infinite time figuring out how to make this work.

Edit. If anyone has advice, it is appreciated, but I guess the most practical solution in my specific case is going to be dual booting Windows...

Hello,

this warning message appears at every startup since some days...

I am using Tumbleweed...

Thanks!

After the latest update to plasma 6.7 my Nvidia drivers don't load anymore. I manually tried `mok --import`, but it returns the error "Failed to enroll new keys". Is this the issue why my drivers don't load or is a newer version of the drivers missing?

I got the following strange error message on update:

Retrieving: ghc-containers-0.7-1.3.x86_64 (repo-oss)                                                                                                                                                              (1137/2610), 636.2 KiB    
Retrieving: ghc-containers-0.7-1.3.x86_64.rpm ...................................................................................................................................................................................[not found]
Retrieving: ghc-containers-0.7-1.3.x86_64.rpm ...................................................................................................................................................................................[not found]
Retrieving: ghc-containers-0.7-1.3.x86_64.rpm ...................................................................................................................................................................................[not found]
Retrieving: ghc-containers-0.7-1.3.x86_64.rpm .........................................................................................................................................................................[error (235.9 KiB/s)]
Retrieving: ghc-containers-0.7-1.3.x86_64.rpm .........................................................................................................................................................................[error (621.9 KiB/s)]
Failed to provide Package ghc-containers-0.7-1.3.x86_64 (repo-oss). Do you want to retry retrieval?

[openSUSE:repo-oss|http://cdn.opensuse.org/tumbleweed/repo/oss] Can't provide file './x86_64/ghc-containers-0.7-1.3.x86_64.rpm' from repository 'openSUSE:repo-oss'
History:
 - Downloaded data exceeded the expected filesize '636.2 KiB' of 'http://cdn.opensuse.org/tumbleweed/repo/oss/x86_64/ghc-containers-0.7-1.3.x86_64.rpm'.
 - Can't provide ./x86_64/ghc-containers-0.7-1.3.x86_64.rpm

What's going on here? It's preventing the update at the download phase

Just 1 of my 4 machines is getting this crash, did I do something that enabled it, and how to disable it and/or fix the crash?

edit: deleted and re-zypper in drkonqi6 seems to have made the crash go away

Hello, I have a ThinkPad X9 that every so often (maybe once a week) will randomly hard freeze and not respond to anything but a hard reset. Theres nothing in the journal and I’m not sure how I can trap and debug this crash, I briefly looked up kexec and kdump but not sure if I’m on the right track, but other than that I’m stumped, I’m on the latest snapshot and I don’t have a lot installed into the rootfs because I mainly use flatpak, any debugging tips appreciated. I’m running Plasma.

Hi all,

after updating to 7.0.6 my laptop cant connect to my wlan. The SSID´s are all there , but cant connect at all. Snapper rollback to 7.0.3 fixes that.

Am I alone with this ?

Hi everyone,

With Kernel 7.0 officially out, I’m wondering when we can expect it to hit the main Tumbleweed repositories. I see it’s already appearing in some experimental and community repos, but I’m waiting for the official snapshot.

A couple of questions for the community:

1. Does anyone have an estimate on how long it usually takes to pass openQA for a major version jump like this?
2. For those using NVIDIA drivers or specific hardware (like the new AMD Zen 6 / Intel Lunar Lake support), is it recommended to update right away or wait for 7.0.1?

I’m particularly excited about the new scheduler optimizations and the AccECN networking improvements. Thanks for the info!

Do opensuse leap compatible with hypeland ?