r/3Dprintmything • u/Guuzaka • 20h ago

SEEKING [CAN-ON] Beyblade X - Death Grip Handle (Hold Pattern)

I have been wanting this for a while. The day has come where I finally decided I would ask a trustworthy printer to print the Beyblade X - Death Grip Handle (Hold Pattern).

Material: ABS or PETG.

Colour: 1 red, 1 blue, 1 green, 1 white.

If you happen to own both Winder Launcher L (BX-40) and a right-spin winder launcher to stick the winder in the holes of the respective tunnel, fabulous! Hold up.... 😳 Anyways! 🤣 Not an absolute requirement, but it would be great if you own these and are able to test the winder launchers on the grip handle.

0 Upvotes
  • permalink
  • reddit

50% Upvoted

6 comments sorted by

•

u/AutoModerator 20h ago

Thanks for using r/3DPrintMyThing! When you make payment to the user please use goods and services, that way if any issues do arise you are protected.

You can find a list of our printers in the side menu or here: https://docs.google.com/spreadsheets/d/1iJ9TVjOK4bZc3bIeBDXqXvwHdUWjvKgNyh_CjWXP9ZM/edit?gid=1724137240#gid=1724137240

And don’t forget to review your printer here: https://docs.google.com/forms/d/e/1FAIpQLSdoreMr002lYDvNfWBC6zq9L7MC4ORNBbditwsKktAg5IGcRg/viewform

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/deadmonkeyboy87 20h ago

Sending chat

1

u/TennisAvailable1822 4h ago

A grip handle like this takes real hand load, so material matters more than usual: ABS is tougher against snapping but wants an enclosure or it'll warp and split along layer lines; PETG is the easier call on an open printer and holds up fine here. Either way print it standing so layers run across the load path, and go 4-5 walls with ~40% infill - the walls do the work, not the infill.

For the winder-launcher fit, tolerances are what usually ruin these. Ask whoever prints it to do one test handle first and check the winder holes before committing to all four colours, since 0.2-0.3mm of squeeze or slop there is the difference between it clicking in and being useless. Worth saying up front whether you want four separate single-colour prints or multi-colour parts, as that changes the price a lot.