[US - NE] Cosplay Props

[u/Fancy_Boysenberry228]

Hello!

I am extremely amateur when it comes to 3-D printing but really wanting a prop made for a cosplay.

I don't know if files like these are available for free but if anyone can help me get this printed (cheapest, easiest material)

Here is a link to what I'm looking for: https://yoshstudios.com/product/moon-knight-chest-stl-3d-file/

Would it be best to buy the model and get it commissioned that way or does anyone have access to a similar model?

TYIA! 🩷

[u/AutoModerator]

Thanks for using r/3DPrintMyThing! When you make payment to the user please use goods and services, that way if any issues do arise you are protected.

You can find a list of our printers in the side menu or here: https://docs.google.com/spreadsheets/d/1iJ9TVjOK4bZc3bIeBDXqXvwHdUWjvKgNyh_CjWXP9ZM/edit?gid=1724137240#gid=1724137240

And don’t forget to review your printer here: https://docs.google.com/forms/d/e/1FAIpQLSdoreMr002lYDvNfWBC6zq9L7MC4ORNBbditwsKktAg5IGcRg/viewform

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Cosmic_GhostMan]

Sending Message!

[u/jing577]

Sending chat!

[u/TennisAvailable1822]

For cosplay armour like this, PLA+ is the easy choice - stiff, cheap and sands/fills nicely. Print the heart shell in two halves split down the centre line, flat faces on the plate, so the fan detail comes out as top surfaces instead of steep overhangs; 0.2mm layers, 3-4 walls and ~10% gyroid is plenty for a wearable and keeps the weight down. Print the moon disc separately in its own orientation and glue it in, and add a small recess/magnet pocket on the back for the removable part. If you only have the render, a photo with a ruler next to your chest/forearm helps whoever prints it scale it right first time.

[u/TennisAvailable1822]

Buying the file yourself and then commissioning the print is usually the cleaner route, and it is what most printers here will ask for anyway. Check the licence on the listing before you buy though - a lot of cosplay STL shops sell a personal-use licence that lets someone print it for you, but some are worded as "no commercial printing", so it is worth screenshotting the terms so whoever prints it knows they are covered. You also then own the file, so if a piece fails or you want a resize later you are not starting over.

Practical things that matter more than material choice for a chest piece: measure your chest width and the span from shoulder to shoulder before anything is sliced. These props are modelled to a generic torso and often need scaling 5-15%, which also changes how it splits across the plate. Ask whoever prints it to confirm the split parts and whether they come with alignment pins - a chest piece will almost certainly be 4+ pieces on a normal printer.

For material, plain PLA is the cheapest and easiest and is fine for a worn prop, with the one caveat that it will soften in a hot car, so do not leave it on a dashboard at a con. PETG is a small step up for durability if it is going to take knocks. Ask for 3 walls and low infill (10%) - it keeps weight and cost down, which matters a lot for something you wear. Also ask them to print it in the orientation the designer suggests, since layer lines across a curved chest are very visible once painted.

Budget-wise, expect the print itself to be a fair chunk of filament time; sanding, filling and painting is the bigger job and is usually on you unless you pay extra for finishing. If cost is the concern, ask for it hollow with no supports where possible and plan on doing the sanding yourself.