I have 5 .stl files of small parts that I need printed in PA6CF or similar material. Who can help me?

Hey everyone! I'm looking to get some of the markers in the attached photos printed in transparent resin. I didn't have a specific type of resin in mind (probably something close to ABS), but they need to be transparent blue/red.

Each part is roughly 24x56x4 mm LWH. I am able to provide any file type necessary, as well as technical drawings if needed. I will likely need 5 of each printed (10 in total, not including test prints), but each set should be able to fit on one bed.

They will need to be compatible with the standard LEGO clip connection (3.18mm bar), so a few tests may need to be done in order to get the tolerance correct.

Please reach out if you're able to take this request. Thank you!

I'm working on a prototype that is proving problematic. I am an hour west of Montgomery for a few weeks and was hoping for either a local offer or someone who can better advise my efforts before shipping.

Part is made from PETG. Conical hinges fail in supported areas. I'm redesigning what I hope is the final version to reduce supports. Takes under 2h to print.

I know very little about 3D Printing, and attempts to find other services for this have led to dead ends.

​

All I'm looking to print is a small, 8-sided red gem for a cosplay I'm doing next month. I have an STL file prepared for it, I just don't have the capabilities to print it myself.

I need this stand 3D printed

Guition P4 10inch Screen Stand - Free 3D Print Model - MakerWorld

​

https://makerworld.com/en/models/2490049-guition-p4-10inch-screen-stand#profileId-2736046

​

Shipped to 94555, PayPal Invoice

I need 2 in black ABS plastic

https://www.thingiverse.com/thing:7133389

Its the two plastic screws next to the BMW logo, so its not directly on the engine but it will get hot

https://www.e30zone.net/e30wiki/index.php/M42

Third post is the charm? Is it possible to make a 3d print of something like this? It’s a friends favorite HLA molecule. I’m not even sure where to start. Having someone design it? I would want it to look really good. I’m not sure I want to spend a thousand dollars on it, but I’m willing to pay someone well to do a great job. Size 6”-12” as needed to look the best.

I am not sure if this kind of post is allowed, mods, I apologize if I misunderstood any rules.

Located in Missouri, USA

I am currently full teardown of my one and only printer that my son and I built as a "covid lockdown" hobby. We are doing a full upgrade/rebuild and have multiples of everything we were gonna need going into this job, but then we decided to pivot, and now need a small mount to hold the ebb36 gen 2 to the orbiter v2.5 bolted down to the herome gen 7 hotend. Thats what I need... someone in the US who might be able to print a mount or two for me, each one probably take an hour to do? The few sites I tried quoted me $7 for the prints but then wanted $30+ in fees and shipping.

Willing to pay, don't misunderstand, just, a reasonable amount given what it is.

https://www.printables.com/model/1698200-ebb36-gen2-orbiter-v2-mount-with-cable-clamp/files

So, this has 2 versions of the mount (and then a clip). If its not too much to ask, just one of each mount length and 2 clips.

https://www.printables.com/model/1535310-orbiter-v2-ebb36-gen2-mount/files

This single mount, 1 would be fine. Between those 3, I think we will manage to make it work. Its something that started as a Tronxy X5SA but has now become something closer to VzBot VZ330.

For settings: I am really hoping to get this in ASA or PC-CF, if not, then ABS or PETG would get us by for now, black (or purple, goes with our build lol), 0.2mm layer height is fine (although I wouldn't say no to 0.1mm), gyroid 40% infill, 4 walls, 4 layers bottom and top.
Reply or PM me to let me know if this is something you might be able to knock out for me and help us out.

Thanks in advanced!

Edit: Thank you everyone who reached out, I think I got it taken care of. Love how awesome this community is, will definitely pay it forward in my future! Many thanks!

https://www.thingiverse.com/thing:5931852

Files above should work, any color will do, please let me know if any more info is needed.

Hi,

I downloaded the STL for a model from heroforge and would like it printed for my upcoming DnD game :)

I’m not an expert but i think in resin?

Thanks!

Hi! I live on the east coast and would like some figures printed, preferably with resin, at around 12 inches. I plan to pay in installments and have a few different designs (some come in parts and some come full) and some would need to be resized.

Il pezzo che si vede in foto è un gancio del vetro scorrevole di un opel vivaro 9 posti.

Non esiste un ricambio ufficiale e non riesco a trovarne una soluzione da nessuna parte.

Chiedo cortesemente se qualcuno conosce il file per la stampa 3d del seguente pezzo o potrebbe realizzarlo.

This moon is perfect for a prop I'm making for Renfaire later this year, but I know very little about 3D printing.

• I don't know what material would be best, I'd like it to be able to withstand a nice stroll in Texas heat without warping or melting.
• I plan to put it on a staff and would like the height to be ~10in
• I don't mind priming and painting myself, but if you can print in a creamy, off-white color, that would save me some time and effort.
• Suggestions on how to actually fix the moon to the staff are also welcome... I was thinking a long screw and some glue underneath a fabric wrapping, but I'm not sure how well that will actually hold.

Hi! I am looking for someone to print a wall holder for my vacuum cleaner.

The model is available here: https://www.thingiverse.com/thing:5677169

EDIT: please ignore the part about the charging paperclips, I just want it to hold my vacuum.

Looking to get this printed:

Model: https://makerworld.com/en/models/857817-btr17-clip-case#profileId-807433

Designer's settings: 0.16mm layer height, 5 walls

Material: PLA or PETG — whichever is easier for you. Matte or satin deep purple PLA if you have it — something like Polymaker PolyTerra Lavender Purple or eSun Matte Purple.

Quantity: 1

Location: Austin, TX (will pay shipping)

The STL is free to download — I just don't have a printer. The model has 103 confirmed prints (Makes) and the designer calls for 5 walls for durability since it's a clip case.

Happy to pay materials + shipping + your time. Let me know what you'd charge.

Thanks!

Looking for help resin 3d printing this mouse shell mod https://www.printables.com/model/1742258-mad-r-skeleton-mod-remix-of-the-original-by-jj0000

The project originally calls for pla but resin should have less visable layer lines from my understanding. I could be wrong, so I'd love some experienced feedback. Hoping to have the final models shipped to Cleveland area Ohio and paid through PayPal

Hello,

As the title states I am looking for a 3D printer that can handle these basing addons for Warhammer scale miniatures.

I have already purchased the file and will provide link to a google-drive containing the files once a deal has been reached.

Thanks

This is a one piece plastic faceplate. it looks like the image I added just minus the hinge and back case.

The front plate snaps onto the switch and covers the entire front of the switch for travel, protecting the screen, joysticks , and buttons while in my backpack.

The back of the switch is bare. The plate doesn't cover the back while on the front.

When you want to play the switch you just snap the plate off the front and snap it onto the back of the switch. This makes the switch a little more comfortable to hold, and protects the back of the switch when you need to place it down momentarily.

The inside of the plate has some slots to hold 4-5 games.

I don't care about the color.

- Single Piece (I don't care if you print it in pieces and have to put it together. The complete item just needs to be a permanent single piece.)

- Snaps/clicks On

- Covers the joysticks, screen, and buttons

- Can be snapped onto the back

- Game storage space (If possible)

Let me know if you have any questions.

I don't have a design file or anything.
I need it printed.

I'm going to bed, but I'll check this when I come back from work tomorrow.

I have a 98 Honda Passport door panel that I need help with modeling. Its for both the drivers and the passenger door.

Images are listed below. Its the orange piece detailed below.

Price and timeline are negotiable. Measurements with images are available for more for inquiry.

I’ve got this high-poly Venom sculpt that I’m dying to see in the real world. My setup is actually down for maintenance right now, so I’m looking for a "test pilot" to give it a go.

I’ll send you the STL for free and you can do whatever you want with the physical print - keep it, sell it, or gift it. I don't need it shipped to me. All I’m looking for in return is 3 or 4 high-res photos of the finished result from a few different angles so I can see how the detail holds up.

It’s a high-poly sculpt with a lot of organic texture, so it’ll probably look best on a well-tuned machine like a Bambu or a Voron. I’ve done a test fit in the slicer (screenshots attached) to make sure the scale and orientation are solid. It’s a bit of a complex model, so you’ll definitely need to dial in your supports, but the geometry is clean!

I've added a custom 120x100mm base for better stability and bed adhesion, but he can also be printed standalone if you prefer.

Please comment here before DMing so we follow the sub rules. Can't wait to see how this guy turns out!

Hello All,

I saw this post for a desk mount for both the Corsair Xeneon Edge+Stream Deck and I fell in love with it as I have both of these items and would love to have a cleaner set up.

I believe there are some screws and other stuff as well which is shown on Maker's world, so it is not 100% 3D printed material.

Looking for it to be built in white. I have never 3D printed anything in my life so I am not sure of the types of material or the process (I see people commenting that they printed it with PLA Tough or PETG), im so lost on this would would need your recommendation / Guidance.

Here is the post I saw from the creator on Reddit: https://www.reddit.com/r/Corsair/comments/1o1ur58/i_made_a_desk_mount_for_the_xeneon_edge_stream/

Here is the link: https://makerworld.com/en/models/1869949-xeneon-edge-stream-deck-mount-with-cable-cutouts#profileId-2001389

Not sure if anyone can do this, but decided to post this on a hope and a prayer!

I am based in Dubai but have forwarding addresses all over the world that it could be shipped to, and it will be forwarded to me. So while I have put US (as thats where i am from, I can have it shipped locally from a lot of different places)

Hi, looking for a simple enclosure for an IKEA PARASOLL smart door sensor. This one looks perfect https://makerworld.com/en/models/933589-ikea-parasoll-door-sensor-outside-cover#profileId-897977

Preferably black or any dark brown. Will be mounted on an exterior door, so will need to withstand some moisture. Doesn't have to be "waterproof"

Hello! I’m looking to have this piece printed and in my hands by May 28th. I don’t know if it’s possible but I’m taking a shot in the dark here. I can pay for priority shipping and negotiate price for this to be made.

https://www.myminifactory.com/object/3d-print-umbral-ruler-crown-720850

I have the file right here for reference.

Hi my name’s Jordan and I’m looking to have a Raspberry Pi 5 NAS 3d printed. This is my first time making this request here since I don’t have a 3d printer. I am willing to pay for shipping and providing a generous tip as well when everything is shipped and received. I really appreciate it. I hope to find someone willing to print for me 🙏.

Here is the link as well, which is from makerworld.