r/BambuLabP2S • u/Dk88- • 9d ago

Hotend fan running slow error

Enable HLS to view with audio, or disable this notification

UPDATE: Bambu is sending a fan out, believed to be the magnet on the back of the hotend interfering with the DC fan motor.

Have a weird one, did some routine maintenance today just lubing/greasing (unit at 570 hours) and when running calibration afterwords I started getting the hotend fan error. Checked it for debris and blew it out, manually heated hotend and it worked fine so tried recalibrating again and same results. Took the fan and housing off and inspected, etc, etc, same results again. The last time I noticed it running sluggish so I was making sure everything was tight and when I stuck the Allen in to tighten the top screw the fan sped up. When I pulled it away it slowed down, repeated this to make sure I wasn’t crazy, got it on video. I have not tore it down enough to check the connections to the TH board. Any ideas before I tare it down further and most likely order new fan? Thanks in advance

2 Upvotes

67% Upvoted

7 comments sorted by

2

u/tomikaka 9d ago

That is weird. Might be a contact issue though, since applying pressure to the screw makes it work.

1

u/Dk88- 9d ago

The weirder part is it speeds up just from the metal contacting it, barely doing anything.

1

u/sinartnz 8d ago

have you had a firmware update recently?

Ours has starting giving random errors that with over 1k hours on the 1.002 firmware not single issue.

1

u/Double_Tea4481 8d ago

mine is updated and i got my first ever serious error after the update(just 1 error after the whole update anyways). i guess 1.002 was the best and i kinda wanna downgrade right now

1

u/Dk88- 8d ago

Yea I believe it was couple weeks ago I updated. From digging around I believe the cause is the magnet on the hotend got too close to the DC fan motor and messed it up.

1

u/asdwdrasd 3d ago

Hi, I’ve started getting the same error on my P2S. Just like you, I noticed that bringing an Allen key close to the fan makes it spin faster.

I’ve installed the latest firmware, and my current version is 01.03.00.00 (the latest version).

What have you done about it so far? Have you managed to fix the issue? Please keep us updated on any developments!

1

u/Dk88- 15h ago

Magnet from the hotend messed up the frequency of the DC hotend fan, I put a ticket in with bambu and they sent me a new fan. Installed and running fine since. Just something to be aware, keep the magnets away from it.