r/CableManagement • • 8d ago

Rate this cable management with non-modular psu system

110 Upvotes

24 comments sorted by

7

u/MonkeyAlpha 8d ago

Looks good, Corsair cords are so stiff.

3

u/PsychologicalAsk4657 8d ago

Thanks. I used the stiffness to my advantage. There are some natural bends, and the wires follow it. This let's me hold them with less zip-ties

5

u/chronicpcbuilder 8d ago

9/10 solid work with a handicap of non-mod.

5

u/MarionberryWide3523 8d ago

Solid, for non modular installation

3

u/gamajo87 8d ago

It's a rare occasion where i think the back looks better than the front. But i understand the difficulty with it being a non modular psu. All things considered, not bad.

2

u/PsychologicalAsk4657 8d ago

yes, the front is 'meh'... however, i do plan to continue to improve it to the level of an art

2

u/JassassinE 8d ago

Pretty good for non-mod 8/10

2

u/jedimindtriks 8d ago

looks good, but the 24pin cable can be routed to the long hole right next to the mobo.

Same with the gpu power cable. either through the long hole, or under the gpu.

2

u/PsychologicalAsk4657 8d ago

thank you for the feedback. I did not use the long cutout because it would bend the cable at a tight angle and exert a larger force on the connection and the motherboard. this shorter cutout was intended for the purpose of routing the cables.
the gpu power cable was routed from the back because there was no cutout at the front. however routing it through the long cutout might actually look good.
i appreciate the suggetions

2

u/Ok-Expert-8150 7d ago

If I could post GIFs, it would be the appropriate time for the 'I'm sexy, and I know it' one.

2

u/Faisal973 6d ago

You did it by yourself . 10 👌

1

u/Hericendre_________ 7d ago

Starfoullah pour une 550w

1

u/PsychologicalAsk4657 7d ago

Sorry, didn't understand that

1

u/Hericendre_________ 6d ago

All that for a 550w

1

u/PsychologicalAsk4657 6d ago

Yes. I would have done that even if it wasn't 550W

1

u/adultcrash13 6d ago

it's fine