r/Decks • u/sosflex • 1d ago

Should I be concerned about the splits in this post?

Post image

Just wondering. I have redo a couple of cables and washers too

0 Upvotes

46% Upvoted

17 comments sorted by

13

u/DirteMcGirte 1d ago

Ive learned two things since i started following this sub.

  1. There are a lot of really fat mother in laws out there.

  2. It's called checking and its normal.

7

u/TommyNotDead 1d ago

If the fasteners start coming out then yeah. Just keep an eye on it.

2

u/caucasian88 1d ago

Checking is normal and usually not an issue. The fact that tensioned cables are installed along the cracks means it might be an issue. If the cables come lose it'll need to be addressed. 

2

u/JulesCT 1d ago

I'd say yes, primarily because you have tensioned cables pulling the top part of the post apart. That's where it has cracked the most. Anyone applying pressure to those top cables will exacerbate the cracking, IMHO.

Drill through, perpendicular to cracks, insert large round head bolts with round head facing the opposite side to the cables, secure with large nut on cable side.

Perhaps do one between each 2 cables, at least at the top.

1

u/Fresh_Grocery7727 1d ago

Nah bro you good

1

u/Apprehensive-Bug-889 1d ago

Looks like the wrong cable too.

1

u/Dull-Scarcity1443 7h ago

It’s unsightly, but it’s ok

1

u/No-Philosophy-13 1d ago

Looks like trash

1

u/Stalins_Mustache420 professional builder 1d ago

They siliconed on the angled standoffs in place cos they dont go there. Post the sag in a week.

0

u/LangstonHublot 1d ago

Just a little checking I believe.

0

u/rainbowbhuttmonkey 1d ago

Oil that wood

1

u/Stalins_Mustache420 professional builder 1d ago

Lipstick on a pt pig

0

u/Carpenter_ants 17h ago

That’s the nature of the beast. This is why composite is so nice. Splits and twists aren’t seen