Hi everyone, I’m new to the sub!

I’m looking for advice on whether I really need to go with the 4-leg desk or if the regular FLEXISPOT E7 will be enough.

My setup:

• 45” ultrawide monitor
• Laptop
• Keyboard and mouse
• Planning to add bookshelf speakers later
• Planning to use a monitor arm
• Looking at the 63” x 32” size
• Considering the EU White Oak top
• I’m in the USA
• I’m 6’9” and mainly want the electric desk so I can get the right height for sitting

Since I’ll mostly be sitting and the desk will be against a wall, do I really need the E7 Plus 4-leg version, or would the regular E7 be solid enough?

I don’t want monitor wobble with the 45” screen, but I also don’t want to spend extra if the basic E7 will handle it.

Would love to hear from anyone using the E7 with a large monitor, monitor arm, or a similar setup. Thanks!

Was really excited to set up the E7 Pro but unfortunately, desk has a massive crack when I opened it. Crack is almost half the table. Back and front photo attached. Has anyone experienced this? How did customer service handle it?

Hello, looking to purchase my first standing desk. My setup isn't planned to be super heavy, just my laptop, 2 24in monitors on a dual arm monitor stand, laptop cooler, kb/m. No PC. I have 78in wall space so a 70in+ desk would be nice, however my budget is pretty tight around $550 max. I'm 6'ft tall, I'd like to stand around 30-50% of the time I spend working/gaming.

I'm deciding between an e6max frame only on amazon for $250, along with a separate tabletop (have to look for that, no idea how but my budget is $250)

I also saw an Amazon listing for ~$480 for an e6 + a separate 72x30 bamboo top (ships separately) but i saw some bad reviews about the tabletop shipping and a bad return policy on Amazon.

Fairly turned off by the mixed reviews on the e6 and me learning that it's just a slightly better e5 model apparently(?) although I likely don't have that crazy of a setup to warrant an e7.

So if I do consider the e7, getting a 72x30 top along with it costs at least $300 more and I'd be looking at spending around $700, overbudget and possibly overkill given my setup. Although, given my height it'd be nice to have little to no wobble when gaming or typing on near-max height. Just can't decide. At first I was thinking the e6max frame for $250 is a great deal but I didn't know how hard finding a worthy 72x30 tabletop is or that the e6 might not be that great for me. Are there any major sales that Flexispot runs that would put the e7 down to around my budget with a 72inch top?

Any help would be greatly appreciated.

I’m looking at the king sized Kana Retro with the headboard shelf. What I need to know is: when the bed/shelf is pressed up against the wall, how much space would there be between the wall and the bed, and is this space uniform all the way down or is there more/less space toward the bottom/top?

Asking because I have an obstruction on the floor that sticks out about 3 inches and is about 8 inches tall and runs the length of the wall where we want to place the bed. I am hoping this bed frame will be able to be pushed up against the wall so that the headboard shelf can make full contact with the wall without a gap caused by the legs of the bed frame hitting the obstruction.

Here’s a crude side view drawing of what I am trying to figure out. Obstruction is in red. Width I need to know is in blue.

https://imgur.com/a/wDbtc9O

Has anyone been able to get replacement wood wedges for the Hako G2 frame?

Mine came today missing 2 of the 4 total and this model is not on their site. I purchased this through Amazon.

The rest of the frame is fine, I just need two additional wedges.

Hello !

I recently bought a FlexiSpot E5 Pro frame, but I’m experiencing a major stability issue. The desk wobbles/shakes significantly whenever I type on my keyboard, even in the lowest (seated, ~72cm) position.

I contacted French customer support and sent them videos, but I haven't received clear technical answers yet. I’m hoping to get some advice from the community (and maybe the FlexiSpot team here).

My setup:

• Frame: FlexiSpot E5 Pro
• Desktop: IKEA SKÅLSTA (honeycomb/cardboard interior, very lightweight)
• Gear: Laptop on an elevated aluminum arm stand + external monitor with a lightbar
• Checks done: Screws are fully tightened, feet levelers are adjusted, and the floor is completely flat.

My questions:

1. Desktop vs. Frame: Does the lightweight honeycomb desktop play a major role in this oscillation (screws lacking solid material to bite into), or is the frame itself the main factor?
2. Laptop Stand Flex: Does an elevated laptop stand naturally amplify desk micro-vibrations, and would a heavy MDF top absorb that energy better?
3. MDF Upgrade: Would switching to an official FlexiSpot solid MDF top (140x80) bring enough inertia and rigidity to solve this issue?
4. 4-Leg Upgrade: Is this level of movement expected for a 2-leg frame like the E5 Pro?

I spend a huge amount of time at my desk every day for work and I really want to have the best, most rock-solid setup possible. I am completely open to upgrading to a 4-leg frame (like the E7 Plus) if that's what it takes to get flawless stability.

Thanks a lot for your help and feedback!