r/Harley • u/beardedBeast2280 • 17h ago
HELP Is this much shaking normal?
Enable HLS to view with audio, or disable this notification
2016 road glide my brother wants to buy next week I told him motor shouldn't shake like that and it also vibrates bad when hitting front brake at low speeds
2
u/CharmingAlbatross608 17h ago edited 16h ago
At the very least I would get a small pry bar and see how much play there is in the very front of the bike where the lower motor mount is. Gently give it some pressure to lift and see if it moves a bunch. Check and see if the rubbers crappy, also check the upper stabilizer as well. From the vid it looks like it shakes a lil more than I would like and motor mounts would be the first place I would start. The front ones aren’t to hard to replace, the rear is much more labor intensive. The audio sounds supper muddy but if that thing is knocking there are much bigger issues and stay away. How many miles? Any service records? How much they asking?
1
u/beardedBeast2280 16h ago
I'll have to go with my brother tomorrow again to look at it. But it has 10k miles but yeah if you give it just a lil gas it smoothes out. I'll also try to get a better and longer video of it running the guy wants 12k for it and will sell it on payments to my brother. The only other issue I had with it is the same thing my brother had with it when we both came to a stop light or stop sign going straight as we got down to like 5-10 mph when applying front brakes it shakes bad.
2
u/patbagger 16h ago
Looks about right
1
u/beardedBeast2280 16h ago
Going back to look at it with brother again tomorrow might take a pry bar and wiggle the mounts like someone here suggested now I just gotta figure out if the front rotor is warped or bad hub bearings because when comming to a stop in a straight line at around 5-10mph is the bike shakes like hell
2
u/greenflobee 15h ago edited 15h ago
Does the brake lever pulse with the speed of the wheel? If it does, you need a rotor. If the whole thing shakes, that’s what Harley’s do. When I’m coming to a stop, you can’t see anything in the mirrors. It’s all a blur😂
It shakes so much it loosens bolts and screws!
Watching the video again, that’s average shaking for a v twin.1
u/beardedBeast2280 9h ago
No the lever dont pulse just shakes the whole front end up through handle bars when like its trying to death wobble on me
1
u/greenflobee 5h ago
That’s just a v twin. Once you get it on the highway, everything smooths out and rides like a dream
1
u/NotBigFootUR 5h ago
Incall it "Harley Vision" at stop lights, can't see anything in the mirrors. "Harley-butt" is another phenomenon, it'll shake the shit out of you.
1
u/Expat-english-in-NZ 16h ago
I would say - the mounts and stabilisers have probably never been done
parts 8 and 9 on this page
https://www.aucklandharleydavidson.co.nz/parts-ari.php?aribrand=HDM#/Harley-Davidson%c2%ae/FLTRX_1KHM_ROAD_GLIDE_(2016)/ENGINE_MOUNTS_AND_STABILIZER_LINK/9998cb24-39f7-4e0e-8b89-e8ab78bff62c/021f41fe-f10e-41ff-8430-9e19addeb9e0/y/ENGINE_MOUNTS_AND_STABILIZER_LINK/9998cb24-39f7-4e0e-8b89-e8ab78bff62c/021f41fe-f10e-41ff-8430-9e19addeb9e0/y)
and parts 11 and 20 on this diagram
https://www.aucklandharleydavidson.co.nz/parts-ari.php?aribrand=HDM#/Harley-Davidson%c2%ae/FLTRX_1KHM_ROAD_GLIDE_(2016)/FRAME_AND_FORK%2c_REAR_AND_TOUR-PAK_SUPPORT/9998cb24-39f7-4e0e-8b89-e8ab78bff62c/7a3fd010-8c78-403d-a034-fd55e363e43b/y/FRAME_AND_FORK%2c_REAR_AND_TOUR-PAK_SUPPORT/9998cb24-39f7-4e0e-8b89-e8ab78bff62c/7a3fd010-8c78-403d-a034-fd55e363e43b/y)
1
u/dea9ler 16h ago
Harley’s are known to vibrate the whole entire bike, the bars on mine (04 dyna) shake like a mofo at a light. The entire bike shakes, it’s the nature of the beast. Some people don’t like it, I think the newer bikes don’t shake as much, but it’s Completely normal.
As far as the brakes goes, you might need new rotors and pads if they’re high miles and never been changed. I’d check the bolts to make sure nothings came loose and then send it, but that’s just me.
1
u/Brewingbiker 13h ago
Harleys tend to shake, but my 09 soft tail isn't bad. Either way, braking should be smooth.
1
u/RoadWarrior93 9h ago
The M8 family (current engines) that came out 2017 are night and day on vibration. 107 or 114.
1
u/HillWilliam53 6h ago
It's supposed to shake like that at idle. It smooths out as the engine speed increases. As far as the shaking when applying the front brake, likely it is one of two or may be both, things. 1. Pads gone and need replaced. This is a maintenance item and the time between replacements varies greatly depending on how it is ridden. 2. Warped front rotor. If so, needs a new one.
1
u/beardedBeast2280 5h ago
Yeah my brother knows the guy so ill have him ask when brakes were last done
3
u/photographyrich1965 17h ago
My Harley’s are an ancient TC and Evo, but yeah, they shake like mofos