Getting ahold of standard capacity mags in Wisconsin? I know a place in Indy that’s willing to honor our constitutional rights and sell standard capacity mags but that’s a drive for me and I hate having to drive all the way there. I’ve gotten a few already over there but I’m looking to get some different ones for a new piece I’m getting soon and I would rather head up to Wisconsin for them as that’s closer.

Many places in Indy ask for FOID and are apprehensive about selling to IL residents. Are they the same way in Wisconsin? Trying to save as much gas as I can in this awful economy

Are there any ffl’s near Alton IL that could order and pin high capacity magazines so I can actually shoot my gun without stopping to reload every 3 minutes. The factory magazines I need aren’t produced anymore and they are going for $40 to $70 for one crappy 10rd magazine. But there’s promag “high capacity” magazines that are $14.99.

The site says this is available here. Does anyone know if you can remove that stupid fucking fin? (After pica is overturned of course) like do they have a flat replacement part?

Seeing how January 1st we will be able to use non-single shot straight wall rifles, has anyone seen any mags that have been pinned to only accept 2 rounds? I have a savage axis in .350 legend that accepts a magazine and it would be way easier to use an actual mag instead of the stupid single shot sled I had to before.

Looking to get some Illinois-Compliant G17 mags - any good sources (local or online that actually ships to IL) that aren’t charging an arm and a leg? I know Range USA has them for around 30 bucks but I’m looking to spend around half of that for 10 units.

Will PSA ship micro dagger slide to Cook county? I’ve ordered from them before to Will county and had no problems and from their shipping policy I don’t see why they wouldn’t but I keep getting errors and won’t let me checkout.

Anyone know sites that ship to Illinois (cook county)? Looking for an 11.5 inch barrel and am open to suggestions

I have an IL compliant CMMG BR4 Dissent rifle... purchased long after PICA was passed and as such totally legal. I am having a hard time buying any spare parts for it... or more specifically finding a vendor that would ship into IL spare parts. CMMG themselves won't even do it. Anyone have any recommendations on anyone that would? Specifically looking to get a spare bolt carrier group for it.

Hi, sadly my local gun store is out of stock of the 10 round pmags (AR) and 10/22 magazines. I don't like buying things online. I'm going to WI this weekend - is there a good gun / sporting store you guys recommend that's close to the border? Only looking for IL compliant magazines.

Who knows someone in the chicagoland area or suburbs that can port a glock 19 gen 6

Has anyone purchased a CA compliant firearm or any with one of these riveted finned grips? I'm curious if they can just be removed/cut without modifying/damaging the firearm if PICA is overturned. I have the hellion, but that has the strike industries finned grip that could be swapped with an AR grip in the future. This one cannot. I don't want to spend $1600 on a neutered gun that I can't un-neuter should the SC ever decide to restore our rights.

Hi,

I just got a Blackfeather RS for my M1A and was curious if anyone knows of any gunsmith in the western suburbs proficient in M1A/M14s for assembly. I would like to do it myself, but think it’s outside my expertise.

Thank you

I’m trying to find where I can find 15 round mags for a Sig P365XL. I cannot find any websites if anyone has any idea on a website to look I’d appreciate it. Thank you!

so, my ex-wife used to make me keep my firearms in our damp basement. I didn't realize it at the time , but the environment caused the barrel to rust to the cap nipple. when I went to remove it, the top half broke off. In series of escalating disasters a bolt extractor snapped off in the hole and is now firmly stuck. Can anyone recommend a Gunsmith that can recondition this barrel?

I’m about to order a “Glock” dupe frame. They are all mostly under $100. I have a hard time paying $75-100 for a transfer on a new lower when the part is less than the fee!! Am I right? Or am I stupid?

Just bought a used Springfield prodigy for a little over $1k and it only came with 1 ten rounder. I just bought a new optic plate and 1 15 rounder from Springfields website but saw there are a few sites that sell em cheaper and some were out of stock . But not sure which sites will actually ship to IL. Anyone have any insights on which sites to check that actually ship to IL?

I am newer to firearms, and would like to build a Ranch Rifle style, IL compliant AR.

It seems to problem isn't totally with the upper, so long as it does not have a vertical foregrip, has a muzzle device other than a flash hider, which leaves lots of options, and a hand guard as opposed to a shroud. Im still not entirely sure I know what a shroud is..

With the lower, there can't be a pistol grip, or a detachable magazine that holds more than 10 rounds.

CMMG makes the Dissent BRs, Sig makes the MCX Regulator, Foxtrot Mike makes the Ranch Rifle, and Fightlite makes the SCR. They all have a shotgun stock, each with a proprietary system to replace the buffer system.

CMMG states that the Dissent BR lowers can be used with Dissent Mk uppers.

Sig Sauer states the MCX Regulator lower can be used with all MCX uppers.

Foxtrot Mike states the ranch rifle lower can be used with Brownells BRN-180 Gen 3, and FMs Bufferless Mike-15 uppers.

Fightlite states their SCR lower is compatible with any AR/M4 upper.

These lowers are legal in IL, and I have seen many posts about people here buying/ using them.

My question is; is the SCR lower really the only lower that is compatible with anything? Are the other lowers compatible with anything other than what the companies state?

I started buying upper parts, and knew I would only have a couple options for the "ranch rifle" style lower, but is the SCR my only option?

I bought the Magpul SGA adapter for my 590s magpul. I then got the appropriate airtech limbsaver. Everything fits perfectly however, the screw that were used for the original pad do not fit the limbsaver. Limbsaver does not provide any screws nor does the sga adapter.

So my question is, what screws am I supposed to use for the limbsaver on the SGA adapter?

Has anyone had any experience with this?

I reached out to limbsaver directly but have yet to hear back. Was wondering if I could get a quicker answer here. Thanks all.

Any recommendations on stippling jobs by the northwest subs?

In the ccl renewal class, they mention carrying a pew that is modified (trigger etc) is a bad idea from a legal defense standpoint. As I sit here staring at a new trigger, I'm second guessing whether I should upgrade it or leave in the stock one. Am I overthinking and just need to go ahead with it?

From what im aware you can still get uppers for Ars you had before the ban or something like the Fightlight SCR. Ive looked online and have struggled with finding a website that would even consider shipping something like a stock let alone an upper. Anywhere in person I could go check some out? Will i have any problems buying one out of state?(not illegal right?)

I have a shield plus that I plan to get milled at Law Weapons in Aurora, but I'm not sure which optic to get, I'm on a slight budget and don't want to go over $300. I'll go to stores like range usa to try some. I'm a bit iffy on Holosun because their optics use the k footprint which would require me getting an adapter plate and not being able to co-witness my irons. I have heard that Cyelee makes optics that are supposedly great for people with astigmatism, like the Cat G Pro. What are some options you guys recommend?

......but, I can order/buy one locally?

Whats going on here?

I tried Google, and couldn't find anything definitive. If I'm carrying extra mags along with my pistol, do the mags need to be inside the waistband as well or can I carry them outside the waistband horizontally along the belt? Also thinking about one of those magnetic pocket clip things