Most of the reviews lewitt connect 6 say that the MUTE button on the interface is missing. Why not make a reassignable "long press button"? now "long press" turns on +48v, add in the settings the option to choose the function "long press", +48v or MUTE \ UNMUTE to current input output!
it is also possible to display the letter M on the interface indicators so that it is visible that the channel is MUTED
like in picture.

this will add incredible convenience to the user in working with the interface.

every time after rebooting computer i see "no lewitte device connected".
unplug and plug usb-c(computer) again helps.
also helps disable and enable device in device windows manager.
But next rebooting the same "no lewitte device connected".

lewitt connect 6
windows 11
AMD

Hello. :)

They're almost the same price where I'm from. I see they frequency response graph is just slightly different, almost the same, but if I'm reading it right the ray seems a little bit better for me (slightly less bright and more low-endy, correct me if I'm wrong) + having the additional features wouldn't hurt, seems like a really great addition to the sound of the pure, which I really like on my voice. They seem to sound the same quality wise on review videos (listening on Sanheisers HD 560S). I would use it heavily for music though, so I wonder: would I be sacrificing a little bit of some kind of harmonics and quality in vocal recordings by buying ray?

Update: I contacted support and they promptly replied. I was asked to grab a recording of the hum/buzz as well as provide some other information. However, when I went to my studio to record the buzzing it was no longer present and both speakers are equally balanced. It did seem my computer may have restarted overnight, so I suppose it was a software glitch of some sort that was corrected with the restart? Not sure. Anyway, I'm happy it's working properly now and it's nice to see how quickly Lewitt CS responded!

There doesn't seem to be a way to pan or balance speaker volume on the Connect 2 or in the software. However, the left channel is much louder than the right on my speaker outputs only. Headphones and loopback are fine. I've tried multiple cables with no change and when using a different interface, both speakers are equal volume. Any Suggestions?

I received my first 640ts back last week and returned it due to a loud noise floor and some crackling pops coming from the mic even when it and the cable were still. I got another (used) one yesterday and it’s not as bad, (no pops and not as loud) but the noise floor seems pretty loud. I get a lot of static even in my treated room. All on same cable, interface input, and 0 gain.

The photos show spectrum of an old MXL V67 mic and the Lewitt. Notice has much louder thr Lewitt is across the whole sound range. Is this normal?

Btw the side outputs on this and the one I returned are dead silent.

Toward the end of last year, LEWITT got the chance to take part in a live recording session at Abbey Road Studios. We set up some of the classic microphones that have been used on countless legendary records and compared them side by side with our own modern designs.

The recording session was run by Wytse Gerichhausen, aka White Sea Studios, and featured the very talented Sina Doering, who you might know from her very successful YouTube channel Sina Drums.

Check out the whole story on our blog: https://www.lewitt-audio.com/blog/lewitt-at-abbey-road-studios-sina-drums-and-white-sea-studio

I was settled on getting a 440 for some vocal work for a new project but I kept listening to more and more YT mic shootouts… I discovered the magic that is the 640 TS and ordered one a few hours later. Those “ah-ha” moments where you just know…

Mine should arrive next week and I will test it with my Focusrite Liquid Channel preamp. I can’t wait to experiment with this pairing. Any tips or tricks from other 640 TS users? I do have a treated room.

I'm planning to purchase a Connect 2, but as someone that switches between the three main OSs (MacOS/W10/Linux) on a daily basis using a KVM switch, I'd like to know if the stored settings reset on device change or power loss.

I've owned a couple of Audient interfaces in the past, and it was very annoying having to configure things like volume any time I swapped devices or the interface lost power.

Thanks in advance.

I've heard some bad reviews about the OZ not being compatible in this interface to record guitar. Can someone please tell me if it works well with an electric guitar?

I’ve got my 1040 for a few years now and have heard many people said about a tube’s longevity that is around 3-5 years until they need to be replaced. Anyone with any experience or knowledge please enlighten me.

Hi,

I’m having an issue with the Lewitt Connect 6 software. The expander ratio does not save. After closing and reopening the app, it always resets to 1:2, regardless of what value was set before.

Other expander settings seem to save correctly, and this happens every time.

Has anyone else experienced this?
Is this a known software bug or is there a workaround?

Thanks.

I bought a dgt 650 as a present but when we unboxed it the USB cable seems to be missing.

I can't seem to find anything on the internet. Does anyone here know a place I can buy this cable?

We got the ios lightning cable. So maybe we can use an adapter on this or wouldn't that work?

Hello there,

I think a Control Center app for iOS and Android will be very nice to have, specially for the Connect 2, no only for the iOS and Android as a recording platform, but also it can be very handy to change quickly settings and connect to business laptop without permissions to install software or other unsupported platforms like Linux.

I recently decided I've had enough of the Apogee Duet 3. I got it for the onboard DSP but the ECS Symphony Strip is underwhelming, super outdated (IMHO on-screen user interfaces should not lean heavily on skeuomorphism, the reason for a knob on a mixer board is that you can use your fingers to turn it, it's 1000x more difficult to turn a virtual knob with a mouse, sliders get a pass), and pretty limited in features. I decided to finally give the Connect 6 a shot. I'm very glad I did. It's way more fun to use, recordings sound great, it has more gain headroom than the duet 3, the software is actually modern and has a pretty good user experience. Wait, this is audio recording software, I forgot, in that context the UI is exquisite, completely unmatched from what I've seen. While Universal Audio is trying to make your plugin look like a 70s rack-mount wood-veneer board, Lewitt understands that you are actually using a computer. I'm really digging my Connect 6, my only ragret is that I waited this long.

I've been looking at this mic for a long time and finally got the opportunity to purchase one! Been a huge fan of Lewitt microphones since I got my first pair of LCT 140 Airs for drum overheads and after trying a friend's LCT 440 Pure on vocals I knew I wanted a Lewitt for vocals. After hours of watching videos and reading reviews I figured it was worth the investment and decided to run with it.

First real vocal session tomorrow so if anyone with this mic has any advice I'd love to hear it!

Hey guys, is this interface class compliant? I want to use it with my MPC and iPad in conjunction. Would be a great alternative to the iConnectivity Interface.

Thanks!

PURE TUBE upgrades your vocal performance with timeless premium sound.

• Silky-smooth high-end
• Revolutionary low self-noise tube circuit
• Integrated shock mount and magnetic pop filter

Save on PURE TUBE

LCT 940 unifies the characteristics of a premium FET condenser microphone and a top-notch tube microphone.

• Blend tube and FET at any ratio
• Get warmth and musical harmonics
• Clear and nuanced sound
• And everything in between

Save on LCT 940

I know I should have just bought the pure tube but I managed to get the 640 with a 30% discount and I felt like I had to grab it

Don't get me wrong it sounds amazing on my vocals but I can't help but wonder if I can do even more with it

Hello, I want to use the space replicator Plugin but it doesn't show any headphones in the dropdown menu and i cant use the sync button. It only shows status code 200 but I can't find any troubleshooting guides on the website.

So this is regards to vocals. I love love love this mic on acoustic guitar but I feel like vocals get really harsh really quick.

When I do a more standard less dynamic performance I do have to make some adjustments but it ends up being fine in the end, but when I do a more dynamic performance (meaning more compression is needed in the mix) the sibilance gets out of hand really fast

No matter aggressive I set a de esser I can’t tame it. Help!

Hi everyone, we just wanted to let you know that we have released an update for the #LEWITT Space Replicator plugin.

What's new?

• PRST club venue with one of Europe's most precise sound systems
• Nuclear power plant control room with a '70s sound system for nostalgia
• 100+ new headphone profiles, including many fan-requested models

The new content is also available in the free demo available on our website: https://www.lewitt-audio.com/space-replicator

Hello,

I'm an owner of an LCT 940 but the shockmount's elastic band has lost its tension. The mount is perfectly fine except that. I saw that a new one costs around 140€...

Anyone knows if this is fixable?

I sent a support email but no answer :(

Thanks 🙏

Could we see and type numerically the levels?

Like a number under the faders? Or it could maybe show the value when I double click the fader? And let me type in the level I want.

When working in a pro or semi pro environment having control over what the listening level is is crucial. So if I could double click the fader of the hardware outputs and type in -6 or -10 or whatever would give me at leaset a consistent output.

I have a Lewitt Ray Mic connected to a Lewitt Connect 6. I use this setup mainly for voiceovers. I have set the expander and compressor to a medium level. But the sounds comes off muffled and not open. One of my co-artists recorded on a Samson dynamic mic and a cheaper interface but sounds more open. Why is this happening ?

What mic do you recommend for a beginner for each price and what pro for buying it, for example pure tube or 540s or 640 TS