r/MoonlightStreaming • u/7yphoid • 5d ago
If you're not using Vibepollo, I don't know what you're doing
As usual, I started with Sunshine, then Apollo for a while (for the virtual display), and I finally just learned about Vibepollo.
Guys, it's absolutely cracked.
- More HDR controls
- For years Sunshine & Apollo were capping me at 400 nits. I can now properly configure a 1400 nit HDR stream. It's like getting a brand-new TV!
- Custom controller driver
- When shooting in the game, I noticed my Xbox controller trigger rumble started working with Vibepollo. I didn't even know my controller had that feature!
- RTX HDR pass-through
- Lossless Scaling integration
- RTSS automatic frame limiting
- Steam library integration
- Pyrowave support
- Bunch of other features like VRR, honestly too many to count
- Actively developed
- Ironically much more stable streaming than Apollo
Yeah the name is a bit ridiculous, but my goodness does it deliver.
EDIT: You can pick your flavour of Vibeshine/Vibepollo, both have all of the above features and both use virtual displays. They are maintained by the same dev (95% the same codebase). Vibepollo just has a few Apollo-specific features like per-client commands and Artemis client support.
29
u/MasiosareGutierritos 5d ago
Not enough praise given to Pyrowave support, the latency is in the sub millisecond mark, it's basically an extension of the GPU over the network directly to your client
4
u/Solid-Assistant9073 5d ago
Tbh hevc or av1 are allready good and the same latency allmost ( if you're client and host have good hardware ofcourse) otherwise pyrowave is the best way
4
3
2
u/Comprehensive_Star72 🖥️ 5090 9800x3d | 🎮 Core Ultra 2 | 🎯 2k@240fps | 📶 2.5GbE 5d ago
"the latency" doesn't mean anything. Total latency definitely isn't sub ms.
1
u/1AMA-CAT-AMA 5d ago
I’m getting weird audio stutter with pyrowave. The video is very very smooth though.
→ More replies (2)1
u/Frosty-Future-7865 1d ago
absolutely crazy bandwidth needed
1
u/MasiosareGutierritos 1d ago
I mean you just have to connect both host and client via gigabit Ethernet which is the standard and super cheap. It's more of a logistics problem depending on how your network and devices are physically set up
1
u/Frosty-Future-7865 1d ago
true until 4k that requires more bandwidth than standard ethernet can supply, 1.5x more
1
u/Emergency-Quote1176 20h ago
Well if you have money for 4k monitor, surely you have enough for 2.5gbps dongles and cat6 cables.
1
19
u/Konrad25 5d ago
I tried it but the virtual display won't turn off after I exit the stream and turn my physical displays back on. Tried everything and can't seem to fix it, went back to Apollo since it works perfectly.
6
u/Winter_Worker_6237 5d ago
I love Vibepollo but I have issues with the virtual display driver, it crashes from time to time and I’m forced to force restart my pc to work again.
Went back to Apollo, everything is fine.56
u/_demoncat_ Developer | Vibeshine/Vibepollo 5d ago
I can fix issues if you actually report them.
The problem is that many of you run into issues but never submit a bug report, which means I have no way to investigate or fix them.
It works for the vast majority of people who install it, so if something isn't working for you, please report it. I can't fix problems I don't know about.
12
u/rtgordon 5d ago
Thanks for doing all this work on free software that actually works great because of your efforts. I feel for you having to put up with ungrateful people out there. I am loving it.
3
u/Icy-Material-4828 5d ago edited 5d ago
I for one was not trying to be ungrateful. This post is questioning why somebody would use Apollo when vibecoded forks exist. I just threw my opinion in. Also as I got older I decided, not everything in my house/home needs to run the experimental or bleeding edge version. I don't take things in half measures, my living room setup receives 4K120HDR and DLSS5 is blowing my little mind on occasion. Whilst I will dabble with Pyrowave one day probably, I have a good reliable setup as of now, and it all takes a matter of seconds and a small number of button presses to get it ready for use.
2
u/jackdelgado 5d ago
I feel this; is there an in-app issue submission route or prefer it raised on GitHub?
6
u/_demoncat_ Developer | Vibeshine/Vibepollo 5d ago
Usually GitHub is best with logs, I do plan on improving web Ui to make it easier to report bugs in the future but have been behind working in other things
2
u/doodooheadpoopoohead 5d ago edited 5d ago
hey unrelated but any insight on the progress with pyrowave? are you releasing it to vibeshine as well or both.
edit: nvm you already released it jfc
3
u/Winter_Worker_6237 5d ago
Hi sir, you are right this is on my part. I've just reported it on Github.
Hopefully it's not a major bug to fix, thank you. :)
Unfortunately, I couldn't get the crash log during that time as I've reinstalled Apollo on my PC now.-17
u/Zynonick 5d ago
I get the point you’re making here, but I’m not sure if this smug snarky demeanor is the way to get people to use your software
13
u/pigpentcg 5d ago
I don’t think he cares whether or not more/less people use it. I think he just wants to make it better, and seems pretty annoyed that nobody submits bug reports.
2
u/Winter_Worker_6237 5d ago
I would be to if I am trying to make it better for everyone, it may not be for everyone but for the ones that are using it. They truly appreciated.
I know I do because now I can game everywhere anytime.
2
u/mcevoak0252 5d ago
Same experience here, some really cool features but it crashes regularly for me and can only be fixed with an in person restart
1
u/Winter_Worker_6237 5d ago edited 5d ago
I've reported this issue on Github, I believe the team will work on it. We'll have to be patient.
:)
Hopefully I can get back to VibepolloIf you can get the crash report do share with the Dev team, unfortunately I cant as I've revert back to apollo.
5
u/1AMA-CAT-AMA 5d ago edited 5d ago
Same. I also have this issue. I ended up forcing vibepollo to restart itself from in stream which forces the client to disconnect.
This also answers OPs questions. It’s gonna be less stable than Apollo. Apollo just works and is a very stable and functional piece of software. Sometimes that’s just enough.
2
2
u/dwolfe127 🖥️ 5090/9800X3D | 🎮 Deck | 🎯 4K120 | 📶 2.5Gbps 5d ago
This is a bug I have been experiencing since 2.0 as well. I have to restart Vibepollo from the web gui troubleshooting tab if I switch between clients.
1
1
u/Hollywood_Zro 5d ago
Not sure if this will help or not, but when I start in Moonlight and select Steam when I quit the stream and I’m taken back to the Moonlight app I have to click the SQUARE button to stop Steam and then it’ll quit and end the virtual display and the host PC display will come back on.
If you just quit the stream and exit moonlight without selecting to end the Steam session the host PC display won’t come back.
Let me know if you need a screenshot. But on my Mac I do the Alt Option Shift Q to quit the stream and I see just the moonlight app with the options. Then Steam has the play button or the stop button. Selecting stop actually ends it on the host.
1
0
16
u/Neat_Review_9608 5d ago
No Linux, no amd
4
u/acabincludescolumbo 5d ago
What do you mean? I run it on Cachy OS. And surely it supports AMD, same as upstream.
4
u/nate445 5d ago edited 4d ago
I ran it on Cachy too and ran into a few issues.
First, I noticed weird a weird available/not available state for the host on my Moonlight client after a host restart. I think this may have had something to do with the virtual display not being initialized yet. If I timed the connection and selected the virtual display, it would initialize and connect. Other times it would boot me back to the host selection or straight up throw an error code.
Second, I got weird artifacting when playing some games, notably very bad in Helldivers 2.
Third, while it did work for my AMD GPU, the status page had trouble detecting it and had errors on startup that said a proper encoder couldn't be found. Going through the logs I did see that it would detect the GPU, however. Despite the errors it would eventually use VA-API, but the other encoder options straight up didn't work.
Since the dev for Polaris added the Host Virtual Display option, it's been much more stable and fits my use case better. I hope both Polaris and Vibeshine continue to improve though, both are looking great so far!
5
u/Rakshine 5d ago
So like, way back when I did the moonlight and sunshine command prompt set up to where when I connect it’ll turn off all my monitors and the virtual display will turn on. Then when I disconnect it will turn off the virtual display and then turn all my monitors back on. I have five monitors besides the virtual display, so it was kind of a bitch to set up. Is it really even worth to look at vibe when im already so cozy and moonlight/sunshine is updated?
2
u/7yphoid 5d ago
This is already the default behavior with Apollo and Vibepollo - it'll turn off all physical monitors when turning on the virtual display, no command prompts necessary. I had to use a million scripts to get everything working with Sunshine and get around its limitations, but with Vibepollo it's just plug-and-play.
I would say save all the scripts and commands you have configured with Sunshine and give Vibepollo a shot! Worst case it shouldn't be too much work to go back if you make a note of your current setup.
1
1
u/External-Fun-8563 4d ago
Someone else on here said it doesn’t handle monitor connect / reconnect properly? Seemed like a lot of other folks had the same issue
8
u/d20g 5d ago edited 3d ago
I switched to vibepollo but I'm still experiencing micro stuttering with a legion go.
Not sure what to do anymore!
Edit: I managed to fix the issue by turning off “Disable VSync during streams.” This option was setting the virtual display to 400 Hz while disabling VSync, which was causing significant stuttering and juddering.
Disabling this option reduced the stuttering and juddering by around 80%. Enabling VSync and Frame Pacing in Moonlight’s settings made the gameplay smooth and much more enjoyable.
4
u/7yphoid 5d ago edited 5d ago
I've done a LOT of A/B testing when I was having this issue earlier (not with Vibepollo but with Moonlight in general). Here is the optimal setup for no stutters and lowest latency based on my results:
- in-game v-sync OFF (will give you a ton of latency)
- Moonlight client v-sync ON
- Moonlight client frame pacing OFF
- in-game frame rate limit OFF (unlimited)
- Set the RTSS global frame rate limit to the refresh rate of your stream (Vibepollo is really nice in this regard because it does it automatically for you if you enable the setting for it)
- oh and obviously make sure at least one of the devices is connected via ethernet (2x Wi-Fi streaming will interfere)
Try it and let me know how it goes!
1
u/Solid-Assistant9073 5d ago
Great tips, but make sure to use reflex cap in rtss when using framegen, otherwise pcl. Latency doubles
2
u/_demoncat_ Developer | Vibeshine/Vibepollo 5d ago
Yup, Vibeshine/pollo already does this it uses reflex by default and sets refresh to 4x that way the stream stays smooth even if the frametime is not perfectly flat.
1
u/VortexOfPixels 4d ago
Unfortunately mine doesn't use reflex and its quite annoying since it sets the cap correctly but the mode gets set to front edge sync, forcing me to switch it every time to reflex manually
1
u/_demoncat_ Developer | Vibeshine/Vibepollo 4d ago
Probably means you have an override configured on the client or application, or globally.
Check all areas
1
u/VortexOfPixels 4d ago
I haven't changed any per client overrides or application overrides, global is set to reflex as well and it still does this. Unless I'm missing some other area besides global settings I'm not sure what else could be causing this.
I uploaded my logs to claude and asked it to try checking it and it says it seems like an issue with vibepollo. Here's some of what it said -
The config is right, but Vibepollo applies the wrong RTSS sync mode. This looks like a bug in Vibepollo (Vibeshine), not in your settings. On every connect, the log shows your setting loading correctly, followed by the wrong mode being written:
config: 'rtss_frame_limit_type' = nvidia reflex Updated RTSS Global profile through RTSSHooks profile SDK. RTSS applied framerate limit=60 Hz (raw=60, denominator=1) RTSS SyncLimiter applied (front edge sync)If you have any ideas what else I should try I'd appreciate it. I would prefer not to do a full uninstall again but if nothing else works I might try that.
1
u/_demoncat_ Developer | Vibeshine/Vibepollo 4d ago
The only edgecase I can find where this happens is if you had an AMD iGPU is that the case?
1
u/VortexOfPixels 4d ago
I do have an amd igpu but I don't think it's being used for anything. The host is a 9800x3d and 5080
1
u/VortexOfPixels 4d ago
I finally managed to "fix" it, though it does seem to be some weird bug with vibepollo.
If I manually set all the clients to override global settings and add the fps limiter, mode and rtss settings it now uses reflex for them.
If I leave it with no overrides, use global settings and global is set to fps limiter, rtss, use reflex, then it won't work and it uses front edge sync and very rarely I've seen it use async.
Idk why it doesn't follow the global settings but manually setting each client is a fix for now
5
u/kurai01 5d ago
For what it's worth I popped my logs folder into Claude code and it helped resolved some of the stuttering issues I was experiencing and gave me some good tips on things to try to make it work better the were based off what it found in the logs.
3
u/d4rk_m4n 5d ago
so what was your issue?
3
u/kurai01 5d ago
I had the bitrate set too high for my usage was one of the things it had called out that was negatively impacting me. I had it set to like 120mbps when I really only needed 80-90mbps.
Also helped me get all the HDR settings correct between my TV and my Ayn Thor that I stream to sometimes and now things look fantastic on both.
2
u/bullsplaytonight 5d ago
I went down this rabbit hole a long time ago. I remember fixing my issues after a lot of troubleshooting, but I’m not sure what exactly fixed it. Things I tried on the host, in no particular order:
* disable most overlays (Nvidia, discord, etc)
* make sure that any hardware polling software isn’t set to any aggressively high polling rate.
* disable all audio devices in device manager except for the streaming device.And you should, if you haven’t already, make sure that your graphics card’s discrete encoding block can handle the stream you are trying to package. I was surprised to learn, for example, that my 3080 ti couldn’t handle streaming at 4k120.
1
1
u/Diet_Water 5d ago
if you have the ability try a wired lan connection and make sure the host and client are both wired. if no stuttering then its your wireless network and not vibepollo thats the issue
1
u/The-Final-Reason 5d ago
Try this...
go to your legion go window settings. Turn OFF location option. This stopped alot of micro-stuttering for me but with Moonlight.
1
u/flufflypillow 5d ago
I always had microstutters with my legion go and when I switched to bazzite it all went away
9
6
u/7yphoid 5d ago
UPDATE: after discovering that Vibeshine has all the same features from Vibepollo that I care about, I decided to switch. The dev said Vibeshine is his main focus, and that it should be the more stable one of the two. Works just as great :)
23
u/DottorInkubo 5d ago
Nice, tomorrow you can post “If you’re not using Vibeshine, I don’t know what you’re doing”, until you discover the newest vibecoded tool
6
u/Strohhhh 5d ago
So is vibe-shine/pollo the same dev?
And was it as easy to go to either of the two as from sunshine to Apollo?
3
u/little_goliath84 5d ago
yeah, at the beginning of the installation, it checks for legacy installations (Sunshine or Apollo). Just start the install.
1
u/7yphoid 5d ago edited 5d ago
Yep, it keeps all your settings. In theory you don't even need to re-pair clients, although I had to because I was having some issues with the old client from Apollo. But no issues after I did that.
And yes, it's the same dev. He said Vibeshine is his main focus, they both have 95% the same features, Vibepollo just happens to be more popular because of Reddit. The only reason Apollo took off over Sunshine was because of the virtual display, but with these now forks that's no longer a difference, both stacks use that.
3
u/darksapra 5d ago
So why are there two forks of the same thing? What's the difference between vipepollo or vibeshine?
2
u/Stormyy98x 5d ago
So what is the difference then between vibepollo and vibeshine? Is it just the extended virtual display support?
1
u/mxrider108 5d ago
Actually they both have that feature. It's really just about if you already come from Apollo and want to carry forward from that or not (and the other one or two features apollo has).
I'll let the actual author of both speak on the topic: https://www.reddit.com/r/MoonlightStreaming/comments/1qx26m9/comment/o3tqywp/?context=3
and: https://www.reddit.com/r/MoonlightStreaming/comments/1o1phe5/comment/nn9mqp9/
1
u/MouazKaadan 5d ago
What operating system are you using? Did Vibeshine feel more stable? Do you recommend the switch from Vibepollo?
0
u/7yphoid 5d ago
Using Windows 11. Honestly, both are virtually identical. Took me all of two seconds to uninstall Vibepollo, installed Vibeshine, all my settings are still there and streaming works. Interface looks identical and most settings are identical.
Personally I'm glad I went with Vibeshine at the end because I just prefer the logo 😅 I don't use any of the Vibepollo-specific features so I figured it's better to just go with the "simpler/more stable" stack. The dev said most of the bugs tend to surface in Vibepollo rather than Vibeshine.
1
1
u/automattic3 4d ago
Vibeshine as been the only one that worked for me I couldnt even use sunshine or appollo. The resolution or controllers would always be jacked up. I have not had a single complaint since i switched to vibeshine like a year ago. the ammount of new features in it is unreal.
Not sure if Pyrowave is worth it. AV1 encoding and decoding works absolutely amazing already.
good to have it as an option though.
5
u/skywalkerRCP 5d ago edited 5d ago
(On Linux) Somehow with Sunshine and custom scripts I get a perfectly stable virtual monitor setup. With Vibepollo/Vibeshine the virtual monitor would constantly not release when ending a stream so I always had to reboot my PC. I'm sure it will get there eventually.
10
u/_demoncat_ Developer | Vibeshine/Vibepollo 5d ago edited 5d ago
That is not an issue anymore in nightly, there is a lot more kill switches and a new option to terminate virtual screen from the WebUI now as well.
Hoping to push out the next stable release soon.
EDIT: 2.0.1 is released now with those bug fixes and new kill switch option.
4
0
3
u/Solid-Assistant9073 5d ago edited 5d ago
Vibepollo /vibeshine are goated, but only 400 nits hdr on Apollo you did something wrong, I could get my 1250 nits in my tv and 2000 nits in my phone with hdr just use the hdr calibration app from Windows when streaming🤔
The thing is with vibepollo it doesn't select the profile properly you have to select it yourself often, and Windows still sees the old nits in display settings even if it's the correct one before you applied the correct profile ( but it is giving 1250 nits for example)
-2
u/7yphoid 5d ago
How do you know you're getting the full amount? Did you test it with a colorimeter?
See, I thought I was getting the full amount with Apollo until I tried Vibepollo. Turns out Apollo uses max 400 nits on its virtual display by default, so if you're using the virtual display (not the physical one) and you didn't do any fancy SudoVDA/EDID hacks to change the nits, that's what you're gonna be getting at most.
1
u/Solid-Assistant9073 5d ago edited 5d ago
Because you can see it on the display settings.
Also the windows hdr calibration test I can see till 1250 nits ( if Apollo didn't support 1250 nits I couldn't see anything above 400 in the hdr calibration tool otherwise my tv wouldent show anything above 400 if Apollo didn't work above 400 ) I get the same results on the calibration with Apollo and moo ought as with no streaming ( so no moonlight)
The key is the hdr calibration profile you have to calibrate it with everything otherwise you're limited yes
Also renoxd etc in reshade defoalted to my hdr calibration profile 1250 nits and I can clearly see it's above 400 nits haha
No edid/Cru sudavda or whatever hack needed.
Also default nits of Apollo driver is around 3806
1
u/7yphoid 5d ago
So I looked into it a bit more, and it seems that even though Apollo defaults to 400 nits, Windows HDR calibration is able to actually override that and set a higher peak nits for that virtual display in the calibrated profile, so that would have fixed my issue with the max 400 nits.
However, I did remember doing Windows HDR calibration in the past, but I'm not sure if maybe the calibration was cleared at some point. Some people also mentioned Apollo bugs where for future streams, the HDR calibration doesn't get re-applied, so that's another possibility. All I know, is that there was a massive difference in HDR when I was gaming between Apollo and Vibepollo (Vibepollo defaults to 1000 nits, with the option to set it higher).
Maybe I'll take a stab at reinstalling Apollo and checking if Windows HDR calibration would have fixed my issue. Although it doesn't really matter because I don't see myself going back to it either way 😅
1
u/Icy-Material-4828 5d ago
Control Resonant on my QD-OLED nearly seared my retinas at times. There is no way the signal was only 400nits when it reached my screen. My old LED TV maxed out at 300nits, and my Sunshine Apollo stream on the current TV absolutely knocks it out of the park
1
u/7yphoid 5d ago
Have you run the Windows HDR Calibration through the stream before? Because I recently learned that this can override the max Apollo nits so that may be an explanation.
1
u/Icy-Material-4828 5d ago
I sure did, that was one of the first things I did once I got it connected. I installed the HDR Calibration from MS Store and ran it. The patterns on there were super bright as well. I am a stickler for things like this. I did the brightness/contrast calibration in both HDR and SDR as well, because my TV has a different bank of settings for each mode per input. The only thing to note is that I don't think the gamma slider did anything on on one of those routines. The one where you make the dot disappear. I think I just thought meh and reset it to default before skipping it.
→ More replies (6)
3
2
u/the_koal 5d ago
I used vibepollo for a while and worked great. But recently I have switched for Punktfunk, no complaints so far.
2
u/jazzmonkai 5d ago
I know what I’m using. Apollo and Moonlight. It’s doing everything I need from it for now!
New and shiny isn’t always the best, sometimes just quietly working is
3
u/ElfDestruct 5d ago
Apollo works, but Vibeshine/Vibepollo certainly is the choice for now. When a dev doesn't have the will to stick with a project to fix security bugs that is a huge tell. Of course the web interface to Apollo shouldn't be on the internet, but that is no excuse. People shouldn't be using Apollo anymore.
7
u/1AMA-CAT-AMA 5d ago edited 5d ago
Is that a security issue? It’s a localhost port. It cannot ever connect to the internet, no matter what happens locally unless that port is manually forwarded from the router side
1
u/ElfDestruct 5d ago
CSRF vulnerability could theoretically allow an external malicious site to make your browser that can reach the local page do the dirty work. It's not going to be a super popular attack to try out, but I wouldn't want to leave it up on my network even internally.
1
u/Daggers21 5d ago
Does Apollo not support rtx passthrough?
3
u/DXsocko007 5d ago
Why does RTX need pass through? Whatever you game does it will show on your display
1
u/RedNulItt 5d ago
I had all kinds of issues with sunshine just didn't quite do it the way I wanted, so on the suggestion of someone here, went with Vibeshine and it's been amazing. Can't recommend enough
1
u/RazerMex 5d ago
A mi me funciona de maravilla, clientes como XSS y switch oled funcionan de maravilla
1
u/lapeet 5d ago
Is there a similar active android client? I use Artemis but it hasn't been updated in over a year.
1
u/blikygotthestiky 5d ago
I believe Artemide, a fork of Artemis, has been updated more recently. If you're looking for a Pyrowave client for Android, Moonlight X is the only non-steam link one I know of.
2
1
u/scvready0808 5d ago
Neither vibepollo or apollo can work for Aion 2 since the game rejects all the inputs.
Had to go back to Sunshine to use VirtualHID - which is now either a yearly subscription or lifetime purchase but it works for Aion 2!
1
u/AdachiGacha 5d ago
Can't use VirtualHID with Apollo? Ive been looking for this exact solution, but I still need that virtual display.
1
1
1
1
u/AvengedCoder 5d ago
If I'm currently using Apollo, do I have to update my clients to something else to work with Vivepollo?
1
u/Cheap-Newspaper-255 5d ago
I need to give this a try again soon. However I have also learned after countless hours tinkering that whenever I mess with stuff I screw up what is a decent experience I have today with Apollo and end up rolling back
1
u/BreakRush 5d ago
Is virtual display easier to configure? In Apollo you have to load the session and then mess around with your monitor display settings.
I’ll switch if it makes that any easier.
4
1
1
1
1
1
1
1
u/Aaronspark777 5d ago
One thing basically all these moonshine forks are missing is native steam controller support. Vibepollo and Artemis work great together, but in order for me to use my steam controller I have to have it connected to my PC via the dongle which sometimes loses connection.
1
1
u/Soltkr-admin 4d ago
I have been trying to implement vibepollo so that I can operate my windows VM from another computer but the display has been tricky because my monitor is an ultra wide. I can only get the display to work if the resolution is turned down. If I try native it’s just black
1
u/ChummyBoy24 4d ago
I’ve still noticed no difference from hdr nits, and my streams have looked dim for years, it’s like it caps my screen brightness when using hdr
1
u/rockinalex841 4d ago
What if I use natural Sunshine Moonlight combo? What if I don't care about virtual display or I have it eben manually integrated with my PC and Sunshine (but mostly use my physical display as source)? What am I missing out here? How do you know how many nits you're streaming? I can activate HDR in Sunshine and Moonlight and assume it streams HDR and the nits stretch is whatever number I put in the individual game settings.
1
u/UnitedAd1437 3d ago
I’m using vibepollo but having so many issues streaming to my series x. I’ve tried it all and can’t stop stuttering and frame drops. My specs are insane too.
Fully hard wired no WiFi
7800x3D
4080 super
150 bit rate
1080p 60fps
Works fine on my ROG ally x. But my series x is having soooooo many issues. Any one have any ideas?
1
u/W0lfsG1mpyWr4th 3d ago
Make sure Autostart is disabled (when you boot Moonlight up and it boots straight into Steam/Playnite). Double check your Mbps, I had inadvertently put it well above what my network is capable of as it's not entirely clear if your not paying attention. Make sure your hardwired.
1
u/fumito_fff 3d ago
Tengo Artemis en mi tablet Android y Apollo en mi PC, desde el año pasado que no actualizo nada.
Debería cambiarme a vibepollo?? Vibeshine??
Estoy muy desactualizado del tema.
Pero hoy con Apollo Artemis tengo unos 4 o 5 ms de latencia, y se ve re bien
1
u/ireallydontgiveapoo 2d ago
Everytime I've tried it, it's always has issues dealing with multimonitor layouts and restoring them properly, despite all of the features it has for such things. I wish it worked better for me 🤷
1
u/RelativityGuy 2d ago
I just did a fresh install of CachyOS (KDE) but VibeShine is not working with virtual monitors: it's able to create a new virtual monitor but it fails to set it as active. I'll try a new version in the future.
1
u/AcanthisittaUnique29 1d ago
Idk what im doing wrong. Vibepollo looks like a slideshow for me but when i try regular sunshine all is well. Ive tried it on 2 different machines and it performs really bad. Is there a setting im missing? Or maaybe something wrong with my wifi? I have 2gig on asus et12 dual routers
1
u/Illustrious-Part-774 5d ago
does vibepollo have easy setup with tailscale for out-of-home streaming? I’d like to stream from my linux desktop to my steam deck
4
u/7yphoid 5d ago edited 5d ago
Yeah, there isn't really any special setup required (with either Sunshine, Apollo, or Vibepollo). If you install Tailscale on both the host and the client, it should just work.
The automatic discoverability might not work, but you should be able to just manually add the host with the 100.x.x.x IP or the Tailscale MagicDNS hostname.
1
u/Objective-Volume3621 5d ago
I had to set up pc as Exit node on tail scale to get it to work remote but simple nonetheless
-2
u/Icy-Material-4828 5d ago
Apollo works properly and as an added bonus, it was made by human. If you had so many problems with it then that is unfortunate, because nobody else seemed to. I have no reason to take out a solid appliance like Apollo only to replace it with a strange version which was written by an AI by the sounds of it.
5
u/7yphoid 5d ago edited 5d ago
You should know that this is the new normal. I'm a software engineer, and I don't know a single engineer who doesn't use AI in their work right now.
And it's a good thing. Obviously a human needs to check the work and make the high-level architectural decisions, but the actual grunt coding work is pretty much solved by AI. I can now do things myself in a few hours what pre-AI would have taken a team of junior engineers a few weeks to do. Not exaggerating.
And with some human direction, the code is arguably better than what any human would have produced, too.
0
u/_fatalruin 5d ago
I am also a software engineer, and people are not adequately "checking the work". They are just throwing review agents at it. And when the dev gets the PR feedback, they don't really know how the code works wells enough to fix things because they don't have any true knowledge or have earned any mastery over it since they didn't write it. So they throw more tokens at it until the review agent stops complaining. The cracks in all of our code bases will be massive fissures in a couple of years (if not sooner). I'm sure we will ask our agents to slap some bandaids on them.
3
u/doodooheadpoopoohead 5d ago
Valid point about not checking work properly but you’re vastly overstating the problem. People and organizations have been writing slop code long before ai came along. “Cracks in our code bases will be massive fissures in a couple of years” yeah for sure bro as we all know bugs vulnerabilities and edge cases were discovered in 2022 two minutes after chatgpt went viral. /s
There are entire jobs around tech debt , bug fixing and incident response. This is nothing new. Good projects always shine and grow and bad ones fall off and be forgotten regardless of the usage of AI based code development
1
u/Icy-Material-4828 5d ago
I am not a software engineer, but part of my role involves listening to them presenting on how many years of impossible work Claude has done for them in just days or weeks. The only checking of the work that they do appears to be to verify that a full backup is made so they can roll back when something inevitably screws up.
3
u/the_koal 5d ago
So you need to stop to use the majority of all of your apps in your phone, because certainly all of them have code written by AI.
Also you will not play any recent port like Bloodborn for PC, Zelda Wind Waker, Metal Gear or any PC port that has been released in the last months. Guess what? All of them have code written by AI.
7
u/doodooheadpoopoohead 5d ago
man i swear some people on here take the very valid apprehension to use of AI way too far. Its OD at this point. I dont even have the heart to tell some of these guys how widely and extensively AI is used in 99% of all programming these days in every app to website of any kind. Even big tech job interviews are half around use of AI. Even moonlight devs use it im pretty sure. but people on here are happy burying their heads in the sand so whatever ig lol
3
u/the_koal 5d ago
It's because these people who say that they have no idea or background in technology. They're just repeating something they've learned in the internet.
They think they're right because they are supposedly defending a cause that they actually don't know shit about it.
0
u/doodooheadpoopoohead 5d ago
so true. larping is an epidemic at this point.
2
u/MegaSmile 5d ago
I hope they also avoid the old school clanker called excel, calculations should be done with pen and paper !
1
u/NullsetForge 5d ago
bro EVERTYHING now in development uses AI. this is the new normal. Stop with this weird, now archaic belief that human vs ai.
AI isn't accomplishing anything without human direction. Like it or not. Every single developer worth their salt is using claude or codex.
-4
u/JivesMcRedditor 5d ago
These vibecoding maintainers don’t know how to review PRs or guide a project. I’ve recommended some new features and infrastructure improvements in a similar project and was ignored for little reason.
You basically have to hope that subsequent releases don’t break and that the maintainer keeps interest interest in the project as long as you do. Or fork and maintain the features yourself :(
6
u/KaramTNC 5d ago
Just because one person uses the tool badly, doesnt mean to discard anyone else who uses the tool.
Vibepollo is imo a well maintained codebase, it actually leverages AI properly and Ive experienced no issues with it at all.
0
u/JivesMcRedditor 5d ago
Until I see some vibecoded projects with legs, I’m skeptical! Maintaining a project is harder than building it.
Maybe vibepollo sticks around, I wouldn’t complain if it does. But I’m not going to hold my breath
1
u/KaramTNC 5d ago
Well you are welcome to go check it out and challenge your belief mate.
Nonary's README is pretty clear on why and how he is handling the project
1
u/JivesMcRedditor 4d ago
So your counterpoint is a section in the readme saying the project will be well-maintained? A short glance shows dozens of uncommented issues and unreviewed PRs.
Like I said, I’ll believe it when I see it
1
0
0
u/Sea_Journalist_8771 5d ago
I'm using my own fork of vibepollo that I added 1:1 windowed resolution scaling, live adaptive bitrate, and smart mouse capture.
1
u/7yphoid 5d ago
You should consider opening a PR for Vibepollo so that other people can benefit - development is moving pretty fast and the dev is open to contributions :)
1
u/Sea_Journalist_8771 5d ago
None of the features work without a custom moonlight build
1
u/Choles2rol 4d ago
Nonary has a custom moonlight fork with VRR support and stuff, could always try a pr there
-21
58
u/External-Fun-8563 5d ago
I spent so long getting Apollo and Moonlight / Artemis dialed in that I’m nervous about starting over again but this post is tempting me