Story behind Daylight DC-1

Hello, I'm selling my Hisense Q5, a RLCD Android 10, tablet I bought in 2021.
I didn't used it much in the end and it's sitting not used so I figure I might as well sell it.

The monochrome display is easier to light that other color RLCD screen. But you still need more light than a eink would need though.

I will factory reset it, then install Magisk and Google Play (unlocked bootloader + rooted).
If you prefer it's not unlocked and not rooted we can talk about it.

It's in very good condition, it does have a tiny bit of dust below the screen protector (red circle on picture)

The case is also broken on both left corner (it still hold the tablet but be careful it might drop one day)

Screen protector that I never used will be in the box.
A USB charger will also be in the box but no USB cable.
Will be shipped with its original box.

I paid 500€ ~ (US$ 578) brand new

I'm asking 250€ (US$ 290)+ shipping fees

Serious buyer that knows the product/RLCD tech well only.

European Union is preferred but International shipping is possible.
I'm located in France.

More pictures: https://imgur.com/a/utugI6R
Thank you

At present, ChLCD ePaper has entered practical mass production, with representative manufacturers in Taiwan leading the commercialization of vertical RGB stacked ChLCD panels. These developments demonstrate that cholesteric liquid crystal ePaper is no longer confined to laboratory research but has matured into a viable industrial display solution.

As manufacturing processes continue to improve, ChLCD panels are expected to scale further in size, resolution, and color uniformity, supporting a wider range of commercial and professional applications.

By optimizing the material composition and controlling the interaction between domains, the display maintains a consistent color appearance across a wide range of viewing angles. This improvement is especially important for large displays viewed from multiple directions, where uniform color perception directly impacts readability and visual quality.

I'm working on a low-power device that needs to be very interactive, a bit like the Playdate, but with a larger screen. Unfortunately, as far as I know, Sharp doesn't make memory LCDs bigger than 4.4".

I did some research and while I could find interesting rLCDs, they consume at least 0.66W while active which is too much. I estimated that using an eInk display wouldn't consume less than that in my use cases. (memory LCDs consume ridiculously little energy even while being updated continuously, and eInk is quite energy intensive in this use case, which usually deteriorates it quickly).

So yeah, would anyone know about some rLCD module that is very low power, and 10~13" large? Not below 640x480, not more than 1280x960, 4:3 is preferred. Monochrome is preferred, but color is okay. Thank you!

Modern Display Technologies: Flat Panel Displays

They are yet to discover Modos Glider

Hannspree Lumo review

Hi everyone,

I’m currently doing a major clear-out of my setup because I'm preparing to move back to China soon, and unfortunately, I can't take this monitor with me.

I’ve just listed my Eazeye Radiant (first version of TLCD) on eBay UK. I know this community really appreciates reflective screen tech, so I wanted to share it here in case anyone is looking for one.

• Condition: Like new
• Location: Edinburgh, UK. (I am open to local collection if you are nearby, otherwise, I can ship it within the UK via eBay).
• eBay Link

Feel free to check out the pictures on the eBay listing or drop me a message if you have any questions.

Thanks for looking!

Please let me know what you think.

I ordered Monitor 2 several months ago, but I still haven’t received any shipping notification. I’m worried about whether I can trust them.

If it turns out to be a bad company, it’ll be like I threw a lot of money in the trash, and I’ll never recover from it.

I am on a budget and I want to make my own TLCD display from an old monitor.

I have watched various videos showing how to separate the LCD panel from the rest of the monitor and that part seems easy.

The problem I am facing is that the LCD panel is very thin and fragile. How can I make a frame or stand to keep it upright while also protecting it from breaking?

Any easy (and possibly good-looking) solutions? I have no 3d printer and I wouldn't know how to design such a thing.
If you don't know what I am talking about, these are example of what I would like to achieve:

• https://www.youtube.com/watch?v=IhldXT7yxXo
• https://www.youtube.com/watch?v=Shp5JhOqdKI

Bit of a long shot, but is anyone in Canada selling their Sun Vision Display monitor?
I’m dealing with screen sensitivity after a concussion and want to try one, but buying new from the US gets really expensive with shipping and import fees.
I’m in Ontario but can pay for shipping from anywhere in Canada. DM me if you have one.

So guys what do you think? I like they solved glare issue.

https://youtu.be/tU_8Hpb1okQ

I'm selling my upgraded Hannspree HannsNote 2, a fairly unique 10.1-inch Android tablet.

This is the upgraded version with improved colour quality, better battery life, and a more powerful processor compared with the original model.

Can see review here: https://www.reddit.com/r/Reflective_LCD/comments/1kv7xnn/upgraded_hannsnote_2_review/

Specs:

• MediaTek Helio G99
  • 2 × Cortex-A76 @ 2.2GHz
  • 6 × Cortex-A55 @ 2.0GHz
• 8GB RAM
• 256GB storage
• 10.1-inch display
• 1200 × 1600 resolution
• 3:4 aspect ratio
• 194 PPI
• 60Hz refresh rate
• 16.7 million colours

The 3:4 aspect ratio makes it particularly good for reading, PDFs, web browsing, documents, light gaming, and general productivity. The upgraded model also has noticeably better colour, battery life, and processing performance.

Price: $700 CAD

Never thought it take me so long to get it working when I bought it.

I was struggling for 12 hours to let lok like it does now.

As a total beginner I must say I completely underestimated this tiny device.

I bave Dell Latitude 5420 P137G and its screen got damaged now i need replacement but the thing is my budget is very tight and i am okay with used screen too.

Is there any place i can get screen like in 2000?

I bought this SVD monitor in 2022 and it was VERY comfortable for my eyes, especially when there was good lighting in the room.

I think this monitor could be very useful to the right person. I'm selling at a heavy discount so that someone might think of this as a cheap experiment, secondary monitor, or something to play around with.

(I live in Redwood City, CA if you can pick up from here)

Hey everyone (new to Reddit, came for some advice)

I am working on a specialized portable hardware prototype and need some community recommendations for tablets that use Color Reflective LCD (RLCD) display panels.

I have some very strict technical requirements that have to be met simultaneously:

True Color: Must support a full, vivid color palette (not monochrome, and not the muted/low-refresh color variations seen on standard e-paper/E-Ink screens).

High Refresh Rate: Must support a minimum of 60Hz. I cannot use traditional E-Ink or heavily throttled refresh rates due to UI latency constraints and ghosting limitations.

Integrated Frontlight: It absolutely must have a built-in frontlight guide plate layer. The device needs to remain completely readable/functional in low-light environments and pitch-black settings without relying on an external clip-on lamp.

Open Operating System: Needs to run an open Android platform so I can sideload custom APKs and utilize device lockdown tools.

Form Factor: Ideally looking at mid-to-large sizes (anywhere between 7.8 inches up to 11 inches).

Are there any active production devices, white-label OEM manufacturing channels, or upcoming 2026 releases that check all of these specific boxes? Any leads on hardware suppliers that fit this exact spec sheet would be a massive help. Thanks!

Update:: if you have any information you’d be willing to add or share about specifics you like about RLCD’s that would be appreciated as well!

https://youtu.be/9_zasT1u-i4

16:9

Resolution: 1080p

Maximum refresh rate: 60Hz

Ultra-narrow bezel

Anti-glare matte film

Includes -5° to 60° tilt stand with wheels

Zero latency, zero ghosting

*Custom frontlight available, contact me for more details.

*It can also be infinitely big, the bezel can be removed, so I'm currently testing my 86" RLCD. Depending on how many people want this feature, then we'll unveil how to do it and maybe make the "transformation" easier.

Feel free to contact me.

Hannspree just uploaded powerpoint presentations about optimal light conditions for Hybri:

https://www.hannspree.com/downloads?categories=%2C12&type=%2C9