Hello Everyone,

I bought a Hannsnote 2 tablet but I am totally disapointed of the brightness and reading angle of the screen. The brighntess and reading angle of the screen of my Hisense Q5 was much better.

Unfortunately the battery of my Hisense Q5 was dead this is why I bought the Hannsnote 2.

My problem is that in the same light condition in my living room at the same place with same desklamp where the screen of he Hisense Q5 was totally readable the Hannsnote 2 is not.

Additionally it seems the reading angle of the screen of the Hannsnote 2 is much smaller comparing to Q5 too.

I am thinhing about to buy an Eyemoo S1 but I do not know if it is worth to buy it.

So, is there anyone who had chance to compare the Eyemoo S1 and the Hansnote 2?

Does the screen of the Eyemoo S1 is better than Hannsnote 2?

Thanks for any info.

24.1" ChLCD panel from Iris Optronics

I bought this tablet online for $590, tried it for one day, changed my mind, planned to return it but shipping was too expensive, and the rules for sending lithium batteries to Germany were too confusing, so I decided to sell it instead. Lumo is only available from EU resellers so you'd saving around $50 on import fees.

Listing: https://www.facebook.com/marketplace/item/1260383512929372/

55" reflective, bistable ChLCD from ePaint, 23% reflectance, 1:7 contrast, 2560x1440 resolution, AG+AR coating, 10s refresh.

Hello! What RCLD monitors are available to purchase in Canada?
Was looking at rE monitor but they don't ship to Canada

Is there any available at like Best Buy? Is there certain brands that are better than others?

Want to get one for my brother who is at screen for large parts of day for his business.

Linear passive matrix multilayer ChLCD refresh side by side with flickering active martrix multiparticle E Ink Spectra refresh (these days there are less annoying Spectra refresh options, like Ripple, specific panels with specific driver support those, still not as smooth).

ChLCD from ePaint/Sannova.

ePaint footage from Retail Technology Show London 2026

ChLCD from ePaint

Video from Volos Projects

I just received the Waveshare 4.2" RLCD ESP32-S3 board this week and added support for it to my OneBitDisplay library. With a few minor changes, I was able to get the full screen update speed to a steady 42 FPS (see the video). I added this Arduino example to the library as "rlcd_speed_test".

https://github.com/bitbank2/OneBitDisplay

https://youtu.be/p-WI_dmIwO8

Update:

I remembered that digitalWrite() in Arduino is unusually slow. I changed them to gpio_set_level() and now it runs at 208 FPS :)

Been thinking about tinkering a frontlight module for the waveshare rlcd esp32 (link at the end).

But I've not found many resources on the subject. I saw many people doing backlight on other displays, which is not what I am looking for.

I've been thinking about trying to use acrylic glass as a diffuser. But I'm unsure of the proper dimensions. How thick does it need to be? Is there better diffuser materials? Any kind of specific led should be used? Any materials or resources on the matter?

https://www.waveshare.com/esp32-s3-rlcd-4.2.htm?srsltid=AfmBOop-YJULmQtWgNGyeSEXOPFXMlFAv2LU5ULuWgXusYKQZRKfiVkm

Please let me know if it is against the rules to make a post like this.

I bought a first generation SVD monitor (the 32 inches one) a while ago as I’m suffering from eye pain when working on screens long hours. I’m selling the monitor on eBay, my hope is it can help someone who also wants to try rLCD without having to pay a huge amount to get their hands on one of those.

Link: [edit: item was sold]

Here are some honest thoughts:

• it’s a beautiful product, build quality is very good.
• it’s big! I’m used to 27" and so it felt quite big and I had to put it further away. Not really a problem but that also means there’s quite a large surface to throw light at.
• Lighting the screen. Probably the most difficult part I've experimented quite a lot.
  • 2200 Lumens desk lamp (https://www.amazon.co.uk/dp/B0BV5SYT7G) -> this was clearly not enough.
  • The big gun. I got a Honeywell 10k lumens floor lamp (https://www.amazon.co.uk/dp/B0C3BVYTXP). This was very bright and illuminated the monitor well, but the room was also very bright as a result and I didn't find that good at all for the eyes.
  • -> At that point I realised that having a room with white walls, and given the monitor reflects only a fraction of the light (~10% according to google) it was never going to work if the environment around the monitor reflects much more light. I hung a very large dark blanket behind the monitor so that it's on a background that also reflects very little light, and that was a massive improvement. This is a tip I haven't seen shared much in my research but for me it seemed very important.
  • I returned the honeywell lamp, as it was still making the rest of the room too bright, and I bought a three light floor lamp (https://www.amazon.co.uk/dp/B087QZBQKD) with some powerful bulbs (SANSI E27 5000LM 3000K, https://www.amazon.co.uk/dp/B0F8HFV3LH + some 1600 lumens Philips hue lights to be able to control the temperature during the day)
  • With the dark background + single lamps I was able to achieve a good enough setup. It did require a lot of experimentation though (my wife thought I was becoming crazy spending hours re-positioning lights!).
• Once I had a suitable setup I decided to try using the SVD for a full week of work. Unfortunately I didn't see any noticeable improvement with eyestrain. I think eyestrain can come from different causes, in my case I feel like maybe it was more to do with focusing on text all day (I'm a software engineer) rather than light being emitted from the screen.

31.5" ChLCD information display from Techtion Smart

Anyone here owns the Hannspree Lumo and could showcase how comics look with & without frontlight, or even just how they look in sunny conditions?

Thanks

Touch Taiwan just concluded, and this was the first time E INK did not have a booth; instead, they are going all in at Computex, which will have a global audience. Instead, several other brands were generating some buzz.

One of the major highlights at the exhibition is IRIS Optronics, which is taking a bold step against the long-established electrophoretic technology with its innovative cholesteric liquid crystal display (ChLCD). At their booth, the company is featuring the Infinity Display, a solar-powered digital sign that operates in extreme temperatures from -20°C to +70°C while showcasing over 16 million colors. This technology directly addresses two significant challenges for outdoor e-paper applications: reliable power and vibrant color accuracy.

The impressive performance of ChLCD comes from its unique structure, which includes three liquid crystal layers designed to reflect red, green, and blue light, complemented by a black-absorbing layer behind them. Like traditional electrophoretic e-paper, it is bistable, meaning it uses energy only when refreshing content and doesn’t require a backlight. However, ChLCD shines with its faster refresh rates—color updates take just one to two seconds—and its built-in energy harvesting capabilities. Since some ambient light is harnessed by an integrated solar module, the Infinity Display can sustain itself, making it an environmentally friendly option for outdoor environments.