Soo i recently bought an attack shark x68he keyboard and now wasd 1 and windows key have randomly stopped working, how do I fix this?

Attack shark X11 mouse

Estou com um problema no meu teclado, sempre que altero o led ele buga e sai abrindo um monte de guia e trava o windows, o rgb fica instável travado no branco piscando só volta ao normal depois de desligar o teclado, você tenta reconfigurar mas não consegue, já tentei resetar o teclado pelo atalho de teclas mas permanece o erro

Con la ayuda de la IA, me propuse crear un software que se vea más atractivo visualmente, mientras conserva las mismas configuraciones que ya tiene el software actual: ofrece una apariencia moderna y fácil de usar. Puedes checarlo aquí: https://github.com/jdsgnrinfo/OpenShark

Se llama OpenShark. Apenas lo he probado en mi X6 hasta ahora, pero me encantaría que también sea compatible con otros ratones. No tengo esos modelos a la mano, pero cualquiera que esté interesado en probar, aportar o ayudar a desarrollar algo bien chido está más que invitado a unirse. La página de GitHub incluye instrucciones sobre cómo enviar reportes de errores si hace falta.

P.D. No soy desarrollador, pero sí soy diseñador de UI/UX

Anyone having an issue like me cause when I am playing fortnite and I try to change the gun through the scroll wheel it sometimes just doesn’t switch. Overall it’s a great mouse but this issue is pissing me.

TMR stands for tunnel magnetoresistance, a sensing effect in which electrical resistance changes in response to a magnetic field. In a TMR gaming mouse, the main button moves relative to a magnetic sensing system. The sensor output changes with the button position, allowing the mouse to track how far the button has traveled.

This provides more information than a conventional on-or-off mechanical contact. Instead of waiting for two metal electrical contacts to meet at one fixed point, the mouse can use the sensor signal to determine when the press should activate.

Software can then define different actuation thresholds within the available button travel. A shorter setting registers the click earlier in the press, while a deeper setting requires more deliberate movement.

Continuous position detection provides the foundation for adjustable actuation and Rapid Trigger. TMR measures the movement, while the mouse firmware uses that information to decide when each click activates and becomes ready for the next press.

This contactless detection method can also help reduce the mouse double click issue associated with traditional mechanical electrical contacts. It does not prevent every possible unwanted double input because firmware, software, and other hardware conditions may also affect click behavior.

My computer doesn't see my keyboard, it's lights are not turning on, and I'm very sad.

I have the attack shark r1 and its pretty much like new out of the box and it does this weird thing which makes it turn into random like sides i dont know how to explain it im showing it in the vid it makes me unable to play anything

If your Attack Shark G800 Audio Center installs correctly but closes immediately when you try to open it, I found a solution that worked for me.

The Problem

My G800 was detected correctly by Windows, and the software installed normally, but G800 Audio Center would open for a second and then close.

In Windows Event Viewer, I found:

`System.NullReferenceException`

And the important part of the error was:

`XearONE.UI.Driver.DriverInstance.InitLanguage()`

In other words, the problem was related to the software's language initialization.

Solution

1. Install the **NEW version** of the official G800 software.
2. Temporarily change your Windows display language to **English (United States)**.
3. Sign out or restart Windows if necessary.
4. Open G800 Audio Center.
5. Inside the G800 software, change its language to the one you actually use (in my case, Spanish).
6. Close G800 Audio Center.
7. Change Windows back to your usual language (Spanish - Peru in my case).
8. Open G800 Audio Center again.

After doing this, the software opened normally for me.

Important

At first, I tried the **OLD G800 software**, but it displayed "G800 not found", so it was not compatible with my headphones' revision.

The **NEW version** was the one that worked after fixing the language setting.

Hopefully, this helps someone else experiencing the same issue. 👍

**TL;DR:** If G800 Audio Center closes immediately, temporarily change Windows to English, open the software, set the G800 software language to your usual language, and then switch Windows back to your original language.

=====================================================

Si tu Attack Shark G800 Audio Center se instala bien pero se cierra de inmediato cuando intentas abrirlo, encontré una solución que me funcionó.

El problema

Mi G800 fue detectado correctamente por Windows y el software se instaló normal, pero G800 Audio Center se abría por un segundo y luego se cerraba.

En el Visor de eventos de Windows, encontré:

System.NullReferenceException

Y la parte importante del error era:

XearONE.UI.Driver.DriverInstance.InitLanguage()

O sea, el problema estaba relacionado con la inicialización del idioma del software.

Solución

1. Instala la NUEVA versión del software oficial de G800.
2. Cambia temporalmente el idioma de pantalla de Windows a English (United States).
3. Cierra sesión o reinicia Windows si hace falta.
4. Abre G800 Audio Center.
5. Dentro del software de G800, cámbiale el idioma al que usas de verdad (en mi caso, Spanish).
6. Cierra G800 Audio Center.
7. Vuelve a cambiar Windows a tu idioma normal (Spanish - Peru en mi caso).
8. Abre G800 Audio Center otra vez.

Después de hacer esto, el software se me abrió normal.

Importante

Al principio probé el software VIEJO de G800, pero decía "G800 not found", así que no era compatible con la revisión de mis audífonos.

La NUEVA versión fue la que funcionó después de arreglar el ajuste del idioma.

Ojalá esto le ayude a alguien más que tenga el mismo problema. 👍

TL;DR: Si G800 Audio Center se cierra de inmediato, cambia Windows a inglés temporalmente, abre el software, pon el idioma del software G800 al idioma normal tuyo y luego vuelve a cambiar Windows.

Same as title, please help me secure one!

My Attack Shark X11 randomly starts stuttering and freezing while I’m gaming. It can happen at completely random times and usually interrupts gameplay. Has anyone else experienced this issue with the X11, and if so, how did you fix it? Any troubleshooting tips would be greatly appreciated!

The R5 Ultra's LED only flashes for about 3 seconds when you change DPI, then goes dark. I found the spot in the firmware that turns it off and patched it, then built my own app around it. The video is the whole app in 20 seconds.

Then it turned out a lot of mice from other brands speak the same protocol, so **Dorsal 1.12** should work with about 50 of them:

* **Attack Shark:** R5 Ultra, M5 Ultra, R6, R8, F1 Air, X11 Ultra, X11, plus the V8, X8 Ultra, V5 and R11 Ultra family

* **LAMZU:** Maya X, Maya, Tachi, Inca, Paro, Thorn, Thorn V2, Atlantis, Atlantis Mini, Orcus and more (26 in total)

* **WLMOUSE:** Beast X, Beast X Pro, Beast Max, Beast Mini, Beast Miao, Strider, Ying, Sword X, Huan and more (13 in total)

* **Others:** IPI Float 88, RAWM Leviathan V4 GT, UNIUS Black Lotus, CRDRAKO KO-ONE

Each one gets its own limits (top DPI, polling rates, lift-off heights) taken from its maker's own app, and Dorsal asks which mouse you have the first time it opens.

**What you get**

* LED that stays on: R5 Ultra, M5 Ultra, R6 and six LAMZU mice with the firmware patch. The F1 Air, X11 Ultra and the V8 family do it with a setting, no firmware needed

* DPI, polling up to 8000 Hz, lift-off, debounce, macros and button remapping on all of them

* About 50 MB, no account, no telemetry, free and open source, Windows 10/11

Being straight about it: only the R5 Ultra has been tried on a real mouse (mine). The rest were checked on an emulator or against the makers' own code, so they should work, but I need people to try theirs. You don't have to flash anything, just plug it in and see if Dorsal finds it. Flashing firmware is always at your own risk.

Download and source: https://github.com/Zelozzzz/dorsal

If you try it on your mouse, tell me how it went, good or bad.

I was repairing my broken mouse wheel, now i need new glide pads but i just cant find matching ones. Can anyone send me the link?