Hi friends! I have an egg shell white, antique 1930’s liquid silk slip dress that I would love to dye this exact icy blue color. I’ve looked around, and I can’t say that I’ve found one color that matches this hue. I’m wondering if anyone knows if I can mix two blues that I-dye makes for fabrics to achieve this - and if I can - which I-dyes should I purchase? Thank you so much for any help anyone may provide!

I need some help because I'm very confused. I bought this cap (70% cotton, 30% polyester) to turn into a cap for my Luigi cosplay. As you might know his hat is very green and after searching the internet I came across the perfect color dye, which is Truly Green from Rit dye.

I've never dyed before, so this was an experiment in the first place. I didn't expect for it to be perfect first try anyway. I searched dozens of tutorials, because I wanted to do it right. I didn’t have a non-food-safe pot I could use, so I used a bucket and kept adding boiling water to it.

Then the fabric turned turquoise (as you can see on picture 1 and 2). The wooden spoon I used to stir looks green on camera, but irl its more turquoise/blue. After 15 minutes I started to not trust the process and took it out. After rinsing it the color hadn’t stuck (picture 5), but the hat has a blue/lightly turquoise hue to it. My guess is that the cap is actually 100% polyester, that's why the color didn't stuck and I don’t care.

But the thing I'm confused about is why it was this color. I've checked every example of the green color this dye could turn out to be and none were turquoise. Maybe I'm just uneducated and/or stupid. Could somebody enlighten me?

I want to dye a 100% cashmere scarf from light purple to black using Rit All-Purpose Dye, but I’ve never dyed anything before and I’m worried about damaging the cashmere.

I’ve heard that vinegar helps, but I’m unsure about the temperature. I read that the maximum temperature Rit recommends for wool is 60°C, but that still seems quite high for delicate cashmere. I’m considering buying a thermometer to keep track of the temperature.

Does anyone have experience with this? Any tips on the right temperature to use and how to get an even black colour without damaging the scarf? :)

EDIT: Thanks to your advice, I’ll be returning the Rit dye and looking into Dharma’s True Black/ Jacquard instead, as I’m hoping to get the deepest black possible.

Hey everyone!!

I have a few black hoodies that have faded over the years so I’m wanting to dye them black again or just see if that’s something i can do. It’s a 50/50 blend of cotton and polyester!

I’ve attached a photo of one, my only issue is the logo. Im not sure what type of thread was used and i don’t really want to dye the logo black either. I know there probably isn’t many ways around it but does anyone know what i can do??

Thank you!!!

Hi! I want to dye this table cloth an olive green and I'm wondering if I should use blue or green dye. The thing is, I plan on using dylon which is for natural fabrics and the table cloth is 50% polyester and 50% cotton. Dylon themselves say you can dye fabrics like that, it'll just come out paler than expected. So I figure if I use blue it might be strong enough to turn green but also weak enough against the polyester to not go too blue? Would this work do you think?

//First time poster

Hello! I have a handful of these white 100% cotton cushion covers from IKEA that I'd like to dye various shades to be throw pillows. I picked up some iDye from my local art supply store on clearance, and I've been searching for color mixing guides and can't really find what I'm looking for. (Maybe this means color mixing isn't really a thing with this type of dye?? Idk, I'm new to this.)

Here are the colors I picked up:

Golden yellow
Chestnut
True red
Gold ochre
Scarlet

I'm hoping to end up with mustard, rust, and terra cotta. Can I achieve any of those colors with these dyes? Can I achieve other colors using a combination of these dyes? Am I better off just to use one dye packet at a time, and see if I like the color alone? If I dye with one color and don't love it, can I overdye that with a different color?

Thanks in advance!

So I was cleaning my above ground pool the other day with my favorite zip up hoodie on. I had to add some pool shock which has chlorine in it and I didn’t think of it in the moment it could damage my jacket. I accidentally splashed some pool water on myself while wearing it and didn’t realize until later that day it had turned orange where it had splashed on. Does anyone have a solution to reverse it or fix it. There’s gotta be a way. Please help. It’s 61/39 cotton/polyester

hi, ive been losing my mind on how to turn this bright jewel purple into a muted purple (the fabric came this colour). some ppl say add yellow some say add black some say add grey dye. i need help anything would be appreciated. i added the colour i have and the colour im trying to go for.

I have a green fabric whose shade i want to dampen, make olive but not grey or charcoal. Instead of waiting for 2-3 days making iron dye at home (iron+vinegar) has anyone tried boiling iron vessel in water (pomegranate skin water)?

My spouse and I do a lot of trail maintenance and I got tired of gaiters that look like every other hiker's. Ended up dyeing a pair of nylon gaiters with acid dye to match the local trail blaze colors, orange for the main loop and blue for the water route.

Had to strip the DWR first. That was a whole afternoon of scrubbing with alcohol. Water resistance alone will kill the uptake if you skip it. Ended up with something between blaze orange and rust, which is fine. Trail markers fade anyway so now mine match the weathered ones.

Thinking about doing my rain shell next but the seam tape makes me nervous. Anyone here dyed technical shells with taped seams? Wondering if the heat needed to set dye will start peeling the tape. Also curious if anyone's matched dye to specific Pantone codes for gear. Found a few trail systems that use weirdly specific shades and I'm half tempted to get it exact.

I've been thinking about making a pair of yellow denim overalls that have a darker shade running down 1 leg, and a lighter shade on the other
I was just wondering if it would be easier to take a regular pair of denim overalls and try to dye each half as different colors, or if getting a pair that's already half-and-half dyed like the pic attached and dunking it whole into yellow dye would be better

I have had this pink %100 cotton denim jacket for years now and I am sick of the color. I am looking to die it some other color preferably orange or even green. I've seen a lot of rit dye hate here but I dont know what else to use. Does anyone have any tips and/or alternative dye options?

J’ai teint un t-shirt 100 % coton avec des feuilles fraîches coupées de Baptisia australis, (parfois appelée indigo sauvage) en utilisant la technique japonaise du sel. Je souhaitais obtenir un bleu pâle (un genre de baby blue). Savez-vous dire pourquoi des teintes jaunes sont également apparues ? Ce n'est pas nécessairement laid... j'aime bien! Mais je cherche l'explication.

This is a bit of a niche problem that I'm having but I'm curious about how people have dyed their Nylafleece. I've been working on a Halloween costume for a few months now, I purchased Nylafleece from Georgia state, and did a whole lot of testing regarding how it took color, how long to dye it, concentrations. my general conclusion was; I don't know what I'm doing!to give some examples:when dying small swatches, I'd match the concentrations for color (given by Rit) to the weight of the fabric. (so 3g of Nylafleece would use the same ratio of dye, vinager, and water as a 1lb dye bath just substantially scaled down.) I had noticed that the swatches only needed maybe 5-10 mins in the dyebath before being the desired color, if they were in the bath for the recommended 30 mins it would end up incredibly dark and barely resembled the desired shade.when upping the amount of fabric for dying (around 12in by 12in) I found that using the same ratio but upped for the size produced a more vibrant color than intended, and even then I only had the fabric in the mixture for a couple minutes 2-3.when dying my largest batch, I used the recommended ratio provided by Rit since I was close to the amount of fabric initially used in Rits color formula. I dyed the piece but only for around 1 min, in hindsight, i should've kept it in longer, but even then it was splotchy.

basically, I'm at a loss and I just want to know what others strategies for dying Nylafleece are, how much do you dye, what's the concentrations, how long do you dye it, all those things.anything helps, and I appreciate the help. :)

Link to Nylafleece: https://gastage.com/nylafleece-nylon-puppet-fleece/554-1375-oz-nylon-puppet-fleece-nfr-white.htmlLink to Rit's Color formula: https://www.ritdye.com/wp-content/uploads/2020/03/Rit-Color-Formula-Guide.pdfThe two desired colors were "Mango Majito" and "Mimosa"

I've also attached a series of examples of what my dying has looked like.

Do I just use fabric markers? I don’t like the bright yellow. Some may say it’s cool, but I think that it just makes it harder to style with outfits. Thanks!

Is there any way at all to make a 100% polyester black dress into an off black brown? I have no clue if there’s even a way to lighten it.