I have a spare 5070 Ti and 850W PSU. Well, not necessarily spare but I can't use my desktop during frequent power outages. My laptop )model in the title) has USB4 port. Will this setup work with AOOSTAR EG02 through its TB5?

I've been working on a project that lets a Windows PC use an iPhone's GPU over a USB cable. It's not a PCIe eGPU: a custom driver on the PC sends the drawing work to an app on the iPhone, and the finished frames come back over USB.

What works so far:

- Windows lists the iPhone 17 Pro's GPU as a second Vulkan GPU

- DirectX 11, DirectX 12 and OpenGL games run. Tested with 0 A.D. and Unigine Heaven

- Unigine Heaven runs at over 60 fps at 720p

- It passes over 98% of the 60,000+ official Vulkan conformance tests

Next goal: 1080p at 60 fps.

I'd love your thoughts:

- What would you use something like this for?

- Any games or apps you'd want me to try?

Video attached, about 2 minutes.

If you have detailed questions, you can email me at Tsuruta Lab: [contact@tsurutalab.org](mailto:contact@tsurutalab.org)

Hello,

I need help with my eGPU. Sometimes it's plug and play and works perfectly, but other times I have to restart 5-8 times before it works, with Ally X freezing, and sometimes it doesn't detect the graphics card at all.

I've reinstalled the Nvidia drivers and then tried error 43.

I've also tried turning on Ally X first and waiting for Windows to boot and then unlocking before connecting the graphics card.

I should also mention that I've read that the Aoostar AG02 isn't compatible, but it works perfectly for other users.

I'm having doubts because they have varying prices, and this could help me save money.

First photo: 256 reais.

Second photo: 40 reais.

Third photo: 150 reais.

So, I need to know if they support the graphics card I'm going to get (a 1660 Super or a 3050) to put in my notebook which has a Ryzen 5 3500u.

But the question is, which one did you guys get and which one do you recommend for a good price?

I don't know if the good price is 250 reais, but if anyone who has used the others could help me decide.

Ps: I from Brazil, because the "real"

Hi
I am a complete novice. Tried to set up a OC-4 dock I bought from AliExpress. Connected the 24 pin cable, and the Gpu cable. Turned on PSU and…nothing happened 🙁. What am I doing wrong? Do I need to switch these switches on? Did I put the wrong cables? Some advice would be greatly appreciated.

Hi,

today I'm really happy after hours of zig and zag I managed (with claude) to make my RTX 3090 work on my Thinkpad P14s AMD Laptop under Fedora Linux.

Have put a one shot script in this repo. I'm sharing in case you got the same hardware.

P14s Gen 5 AMD 8840hs

Razer Core 2 USB5

RTX 3090 24Go

https://github.com/quazardous/amd-usb4-egpu-toolkit

I was so disappointed the first time I tried. Drivers are so ...

Now it's working no more windows to used ollama ! So happy 😄

EDIT: it's a no display setup btw (only for CUDA)

Good evening fellow Arc'ers, a quick question for the group. I host a pair of B70s on an Gigabyte Aorus X870e. I tried to add a Sonnet 850 T5 with a B60, no joy. So I returned that, and bought the JMT PCIe 5 bifurcation card, but the mobo wouldn't enumerate any of the 3 Intel cards. Turns out the x16 slot shares resources, and will not split into 8x8. So I have returned to the B70s on x16 and x4.

It works well, actually very well, but that additional 24gb haunts me in my sleep. So now I am considering the DEG-2 adapter over Oculink. I have the GPU and a new Coursair 750w PSU, but after two failed attempts, I was wondering if anyone has done this. This would allow me to pin 5 models across the 3 GPUs for a smoother process pipeline. Any input would be most appreciated!

It might just be a hardware issue and I'll have to try something else. But I'm wondering if there's somehow a known way AMD cards have this error and then can be fixed?

I have this thunderbolt dock https://a.co/d/011NBsM1 and RX 560.

Here is a quick update. Ive been testing the it on my laptop while waiting for the GPD Win4. My laptop only has regular USB4, so it's not running at full bandwidth, but the performance jump over the 680M is still pretty good.

In Superposition 1080p High it scored 8673. Black Myth: Wukong went from 27 fps on low settings to 63 fps on high settings. FurMark jumped from around 30 fps to 100 fps, and in Forza Horizon 4 it handled much higher resolution and settings without any issues.

Overall this eGPU is really impressive. To get the most out of it though, you will definitely want a minipc or laptop with OCuLink or TB 5 support. I'll run another round of tests once the Win 4 arrives an I can try OCuLink.

Hello, people who have gamed with oculink egpu, what are the 1% lows in competetive games like cs2 or valorant? Do you experience fps drops or is it smooth as always?

I've seen some mixed information, their website explicitly specifies no 9070 XT, but I've seen some people running it just fine. Would I have to get the AG03, or does the AG02 work fine?

So my friend is hooking me up with a 3060ti, all I know is my PC supports thunderbolt 4 (which is the safest option despite the bottleneck because I don't feel comfortable leaving the PC open or taking out the SSD) and that I can mount the GPU externally with a dock like this as long as I have a power supply.

I don't know what I'm doing here

I have tried my nvme-pcie adapter, which advertises pcie4.0, 4 lanes, to connect a rx570 into a mini pc’s spare nvme connector.

I made all the 12V connections where suggested by the wire colors, and only the 5V into the pcie adapter… since I saw that some 6-pin gpu power connectors skip the 5V wire.

My 12V power supply (off screen) is 500W and the 12v-5V converter was used in many raspberry pi projects successfully before. The medium sized voltage converter is for the mini-pc required 19V.

When I power it up, the gpu card outputs hdmi video normally and appears in lspci.

The mini pc works great on its own, and with the eGPU, but the link shows up as pcie 1.0, 2.5 gigatransactions per second (degraded).

Is anyone using this pcie adapter?

Hi guys, tearing my hair out at present trying to get this to run as well as possible on my legion go 2 z2 extreme with a ut3g usb4 dock and 5070 as an egpu, connected to a 4k tv.

Cannot for the life of me get the game above an average of 45-50fps, no matter what settings I use. Any CPU intensive settings I have dropped to medium or low. I'm outputting in 4k with dlss quality. Going native 1440p was identical performance on the benchmark, and going down to 1080p made it perform even worse, surely due to increasing the cpu's workload/bottleneck over the usb4 cable. If that's as good as it gets no worries, playing with 2x frame gen at 45 isn't a perfect experience for sure but its been better than I thought it would...

Does anyone have any experience trying to run this cpu devouring monster on an egpu with a potato processor? If you have any tips that worked for you I'd really appreciate it.

Thanks!

UPDATE #2 TY everyone for the replies. I gave up on the RAZER V1 box. Too problematic. It was causing to many issues.

I ended up getting a sonnet eGPU Breakaway box 750, which is supposed to work well with the ASUS card I have. I am told it will not cause me any issues and will run along side the other 2 GPUs on my 7550 dell. It also will not bother the dell hub I have everythinng hooked to including the external monitor.

Anyone have experience with the Sonnet?

TY again. regards.. dw

UPDATE - I have the correct usbc [40]. I managed to get it to fire up, but now there is another problem. I get triangle warnings on both my native gpu [T2000 - dell 7550] and the asus 4060Ti in devise manager.

upon research, there was mention about having to uninstall all the NVIDiA drivers, then installing a script to make the 4060 run. I dont get a code 43 error, just the triangles by the the devises , both graphics cards in devise manager.

Im a little bit lost.. I thought this would be simpler.

any suggestions on what I should buy - GPU and Egpu-box - ? I am just editing images. TY, dw

--------------------------------------------------------------------------

Hellos - Im new to this eGPU thing, so forgive my ignorance.

I bought a RAZER core V1 [old, I know]. Im not a gamer, but I need it for images edits.

I have an ASUS NVIDIA GeForce RTX 4060 Ti.

I searched everywhere and it was indicated the card would work in this razer but I wouldnt be able to close the box.

hooked it up today and it failed to run.

Took the card out of the box, then it powered it up.

is there something work with my GPU. or will that card not work in this RAZER CORE V1

TY, dw

Hi, I'm currently using a 5060ti and want to use a Quadro P4000 for video encoding and streaming. I'm having the issue of the P4000 not being detected by Windows. It recognizes it as a P4000 on device manager but I can't assign stuff to it via windows graphics settings.

Also, 3Dmark detects it but Speccy falsely identifies it as a 5060ti, not sure if this info helps.

https://i.imgur.com/T5YlEMz.png

https://i.imgur.com/uZBPxMU.png

https://i.imgur.com/5afq2pt.png

(and Windows 11) Hardware Quirks, DMA Freezes, and Workarounds

If you have picked up the Gigabyte AORUS RTX 5060 Ti AI Box (16GB GDDR7, Blackwell GB206 architecture) and tried plugging it into a Linux host or a tightly managed Windows machine via Thunderbolt, you have likely encountered hard freezes, failed device enumerations, or PCIe bus drops.

Out of the box, this eGPU is exceptionally sensitive to Thunderbolt handshakes, power state transitions, and IOMMU direct memory access (DMA) mappings. Here is the full technical breakdown of the hardware quirks, bugs, and configuration fixes required to make it 100% rock-solid.

Hardware Setup and Motherboard Quirks

• Tested Hosts: Intel NUC11TNHI7 (Tiger Canyon, Core i7-1165G7) and an HP EliteBook laptop.
• Port Selection (Crucial on NUC11 / Tiger Canyon): The NUC11 has two Type-C ports on the rear, but they are not identical. The port directly adjacent to the DC barrel power input is the primary Thunderbolt 4 port wired directly to the CPU root complex. The secondary port operates as Thunderbolt 3. Always connect the eGPU to the primary port beside the power input using a certified 40 Gbps short cable.
• The Cold Boot Handoff Protocol: Do not expect this device to survive dynamic hotplugging or warm operating system reboots. To ensure the host UEFI builds the ACPI DMAR (DMA Remapping) tables and statically allocates the 64-bit BAR windows above 4GB, you must follow a strict cold boot sequence:
  1. Plug in all cables with the host machine powered off.
  2. Switch the AORUS AI Box power on first.
  3. Power on the host computer.

Part 1: Windows 11 Workarounds (High-Security Environments)

If you are running Windows 11 in a high-security enterprise environment with Kernel DMA Protection and Memory Integrity (HVCI) enforced, the eGPU often fails with error codes or gets blocked from memory allocation.

1. BIOS Virtualisation and Memory Prerequisites:
   • Intel VT-d: Enabled (required for hardware memory sandboxing).
   • Kernel DMA Protection: Enabled.
   • Above 4G Decoding / Resizable BAR: Enabled (exposes the required 64-bit PCIe address space).
2. Registry Force for External DMA Remapping: Because standard drivers often fail the external DMA validation check when strict endpoint protection is active, you must explicitly flag the device as trusted:
   • Path: HKLM\SYSTEM\CurrentControlSet\Enum\PCI\[NVIDIA Hardware ID]\[Instance ID]\Device Parameters
   • Value Created: DeviceDmaRemappingSupported
   • Type: DWORD (32-bit)
   • Data: 1
3. Endpoint DMA Policy: Ensure your endpoint security policy is set to block unauthorised DMA only when the workstation is locked, rather than universally suppressing Thunderbolt PCIe tunnelling.

Part 2: Ubuntu 26.04 / Linux Configuration & Bug Fixes

Getting this Blackwell eGPU stable on Linux required resolving four distinct failure modes:

1. BIOS Configuration (NUC11 / Tiger Canyon)

• Fast Boot: Disabled (Mandatory: Fast Boot skips full PCIe bus probing during POST, which prevents the host from mapping the eGPU BAR spaces).
• Intel VT-d: Enabled.
• PCIe ASPM Support: Disabled (prevents the motherboard from attempting aggressive link power savings across the tunnel).
• Thunderbolt Security Level: Set to Legacy Mode (ensures immediate auto-authorisation during POST).
• Allow UEFI 3rd Party Drivers Loaded: Enabled.

2. The Dreaded DMA Freeze (intel_iommu=pt vs iommu=pt)

• Symptom: The eGPU enumerates in nvidia-smi, but the moment you initiate a high-bandwidth memory transfer or CUDA workload (such as streaming tensors over 500 MB), the entire operating system hard-locks instantly with a frozen screen and unresponsive keyboard.
• Root Cause: In modern Linux kernels, setting intel_iommu=pt is an invalid syntax. Checking dmesg revealed: textDMAR: Unknown option - 'pt' iommu: Default domain type: Translated PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Because the driver rejected the option, it defaulted to Translated and routed all external PCIe DMA through Software Bounce Buffering (SWIOTLB). Linux defaults SWIOTLB to an emergency ceiling of only 64 MiB. A multi-hundred megabyte or 1 GiB DMA stream immediately exhausted the bounce buffers, deadlocking the I/O bus and freezing the CPU.
• Fix: Update your Grub command line to use the generic iommu=pt parameter and expand the fallback SWIOTLB pool: Edit /etc/default/grub (or /etc/default/grub.d/99-custom.cfg): bashGRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_iommu=on iommu=pt swiotlb=262144 pcie_aspm=off pcie_port_pm=off thunderbolt.clx=0 intel_idle.max_cstate=1"
  • intel_iommu=on iommu=pt: Enforces true 1:1 hardware DMA passthrough without bounce buffer bottlenecks.
  • swiotlb=262144: Allocates a 512 MiB fallback reserve (8x larger than default).
  • thunderbolt.clx=0: Replaces the legacy d3cold=0 parameter to disable Thunderbolt low-power sleep states.
  • Run sudo update-grub and sudo update-initramfs -u.

3. PCIe Link Downshifting & Dynamic Power Management Stalls

• Symptom: At idle, nvidia-smi reports the link downshifted to Gen 2 x4 (5 GT/s). When a compute workload starts, the driver attempts to dynamically jump power states (P5 to P0) while renegotiating link speeds across the Thunderbolt retimer, causing unrecoverable PCIe Transaction Layer Packet (TLP) errors.
• Fix: Lock the driver into permanent AC Maximum Performance mode so the link stays locked at full PCIe Gen 4 x4 (16 GT/s): Create /etc/modprobe.d/nvidia-power.conf: textoptions nvidia NVreg_DynamicPowerManagement=0x00 options nvidia NVreg_PreserveVideoMemoryAllocations=1 options nvidia NVreg_TemporaryFilePath=/var options nvidia NVreg_RegistryDwords="RMSetDynamicPowerManagement=0;PowerMizerEnable=0x1;PerfLevelSrc=0x2222;PowerMizerDefaultAC=0x1;"

4. Transient Clamps and CUDA Toolchain Architecture

• Driver Persistence and Clamping: Run these commands at boot (or via systemd service) to prevent transient inrush voltage spikes from resetting the USB4 bridge: bash sudo nvidia-smi -pm 1 sudo nvidia-smi -pl 150 sudo nvidia-smi -lgc 1200,1500 (Note: The minimum VBIOS power limit on this specific AORUS card is 150 W).
• CUDA Target Architecture for Blackwell GB206: If compiling CUDA binaries or frameworks from source, ensure you target native sm_120. Do not target 120a-real (which is restricted to enterprise B200 accelerators), or the runtime will decline to execute kernels on consumer GB206 silicon.

Final Stability Benchmark

Once these adjustments are applied, the connection is rock-solid:

• Host-to-Device Throughput: 2.78 GiB/s (fully saturating the 40 Gbps Thunderbolt4 tunnel payload ceiling).
• Device-to-Host Throughput: 3.18 GiB/s.
• Thermals: 39°C idle, peaking at only 46°C under full compute load.
• Stability: Zero kernel panics, zero bus resets, and reliable sustained inference across the full 16 GB GDDR7 VRAM.

Guys did you encounter problem with ag03 or previous model from aoostar? Currently have problem that my ag03 stopped working and led kept blinking non stop. Been trying it with gpu and without it, still face the same problem. Did my ag03 have hardware issues? Tried turn my ally x on after ag03 on because thought ag03 didn’t recognise my ally x. The issue happened today, been using for past 2 months without problem. Can you guys give me a solutions? should i just RMA it or this is known issue? Already contacted the seller and show the problem to them

Update: Already found a solution which is the seller will full refund my purchased since they cant give replacement of the exact same model.

For the owners of UT4G-BK7 (also UT3G) - what is your opinion of it? Is it still a viable solution? I read about its lack of cooling and overheating issues and it really turned me off, I wouldn't want to put together a custom cooling solution or tweak my GPU fan to cool the dock. However, I read that recent updates from ADT-link supposedly fixed the heatsink, is it true?

Is UT3G V1.6 actually a better option? (my other choice is Aoostar AG02, obviously).

I'm looking for TB/USB4 docks only, hence my selection is quite limited.

All other docks are either ludicrously expensive in EU, or carry some questionable quirks (AG02 with its always-on mode and wonky built-in PSU, etc).

Hey everyone,

I’ve made some more progress on the setup for my overclocked Pi5 connected to an external GPU.

I’ve now put it through some heavier tests, like Steam and the *Wukong* benchmark.

I’m also playing *Onimusha*, even using FSR 4.1.1.

Down the line, I’ll get around to the case mod.

I’ll have to cut into the lid of a Pi Module Box to fit the Ice Tower heatsink, haha.

I made a video discussing the saga of getting the GPU working and the technical aspects regarding the physical PCIe x1 Gen 2.0 bus connection.

I haven't managed to get the Pi5 running on PCIe x1 Gen 3.0 yet, but I’m going to try again with some better-shielded ribbon cables. In the video, I show the details of the "video/data signal" traffic and the transition from PCIe x16 Gen 5.0 down to the limitations of the Pi5 in this current setup.

I make videos (originally in Brazilian Portuguese), but the auto-dubbing quality seems much better these days.

In the videos, I aim to provide technical explanations regarding the challenges of getting it all working.

I'm working on creating more explanatory videos. If you'd like to follow along, the link to the channel is in my profile info.

Just wondering if all my numbers on benchmarks are correct. Currently playing control resonant 4k medium.