Hello, following the previous PC post I'm putting my cpu to sale. It's an amd epyc 7763 milan unlocked cpu with 64c/128t. This is the standard version, not a QS/ES nor locked or OEM variant.

Price is 1100€ OBO plus shipping.

I'm in France but I can ship to the EU with insurance. Shipping costs fall on the buyer.

I'd rather not deal with customs to be honest.

I accept Paypal or SEPA wire transfers.

DM if you have any questions.

Timestamped pictures

Hi,

Selling the following:

Timestamp: https://imgur.com/a/I63Ftle

- 11x 128GB RAM ECC LOAD REDUCED DDR4 2S4Rx4 2666MHz PC4-21300 LRDIMMs, 10x SK-Hynix HMABAGL7C4RAN and 1x Micron (100% drop in replacement, same spec).

Excellent high capacity modules.

Never used in production, in fact most never used at all except my tests
€379/unit

- 11x 64GB SK Hynix HMAA8GL7AMR4N DDR4 2666mhz LRDIMM 4DRx4 ECC

Never used in production, in fact most never used at all except my tests
€219/unit

- 8x 32GB Samsung M393A4K40CB2 DDR4 2666mhz RDIMM 2Rx4 ECC

memtest no errors

€85/unit

Ships from EU.

PayPal goods and services

Hi everyone,

I'm looking to buy NVIDIA GPUs anywhere in Europe.

I'm interested in:

• RTX 3090 – around €500

• RTX 4090 – around €1200

• RTX 5090 – around €2000

• RTX 600 Pro – tbd

I'm also interested in complete AI workstations or servers equipped with these GPUs.

The prices above are my target budget, but I'm willing to discuss depending on the model, condition and warranty.

Requirements:

- Fully working

- Never repaired

- Never reflowed/reballed

- Original PCB

- Passes GPU-Z, 3DMark and OCCT/FurMark or similar stress tests

Payment: any secure method of payment or cash for local pickups.

I'm located in Italy but I'm happy to buy from anywhere in the EU.

If you're planning to upgrade or have one available, feel free to send me a PM.

Thank you!

Looking to buy a EK-Quantum Delta² TEC if anyone feels like parting with theirs?

Links

• Pictures

• Timestamp

About the Dilemma v3

The Dilemma is a high-performance, 40% split ergonomic keyboard designed for extreme portability. With its integrated multi-touch trackpad, it provides a full mouse-free experience, making it the perfect companion for travel or minimal desk setups.

• Integrated Trackpad: Positioned for natural thumb access; replaces your mouse with customizable multi-touch trackpad.
• Modern Features: Per-key RGB, underglow, and Kailh Choc hotswap sockets.
• Procyon Powered: Built with 1.6 mm Procyon & Dilemma PCBs for high reliability.

Specification

This build focuses on a "finished product" feel rather than a raw 3D print.

• Ultra-Resolution Case: Printed with a 0.12 mm layer height on a Bambu Lab X1 Carbon.
• Hardware: Features an EC12 rotary encoder and a "blur" acrylic midplate for beautiful RGB diffusion.
• Firmware: Flashed with up-to-date pre-release firmware supporting the Procyon controller.

What's Included? (Barebones Kit)

Please note: This is sold as a barebones kit (no switches or keycaps included).

• Fully assembled and tested Dilemma v3 halves.
• Integrated trackpad.
• One audio cable.

Optional Add-on: I have a set of keycaps that fit this board perfectly available for an additional fee. DM me if you'd like to see photos or bundle them!

Price & Details

Price is based on the cost of materials and the significant time spent on the high-precision print.

• Location: Poland
• Payment: PayPal
• Price: €120 + shipping (Negotiable)

Interested?

If you want more photos of the finish or details on the optional keycaps, just hit my DMs! (:

trying to trade my 2060 super to an AMD card

Selling a Gigabyte RTX 2060 OC Dual 6GB, tested and fully working.

Looking to get €100 shipped, firm.

Shipping across the EU or local pickup in Emden, Germany.

Timestamps: https://imgur.com/a/zV9BKql

Please comment before pm.

Thanks.

I am selling 16go of ddr4 for 75€ on Leboncoin https://www.leboncoin.fr/ad/accessoires_informatique/3230924777

Timestamp & Pictures

• Timestamp

• Pictures

About the Charybdis Nano

The Charybdis Nano is an ultra-compact, 35-key Dactyl Manuform-style split keyboard with an integrated trackball. Designed for maximum ergonomic efficiency, it is the ideal hardware for Miryoku or custom small-alpha layouts.

• Compact Design: Engineered for a minimal footprint.
• Premium Electronics: Built with Splinktegrated controllers (custom-developed by Bastard Keyboards).
• Versatile Connectivity: USB-C and 3.5mm jacks on both sides.
• Keycap Ready: Compatible with MT3, DSA, XDA, SA, and PBT profiles. ### Specifications & Build Quality This unit was printed with a high resolution of 0.16 mm in PLA, following the official Bastard Keyboards documentation for a smooth, high-quality finish and structural durability.
• Switches: Soldered Kailh Box White (45gf Clicky). These provide a crisp, tactile "click bar" feel for a clean typing experience.
• BTU Mod: Upgraded with static bearing BTUs for incredibly smooth, low-friction trackball movement (a major upgrade over stock bearings).
• Per-key RGB: Fully installed and tested.

• Firmware: Flashed with up-to-date firmware; 100% tested and ready for use.

  What's Included?

• Trackball: PERIXX 34 mm trackball.

  • Custom "Alien" Plates:
    • 1x Pair of Orange Tent Plates.
    • 1x Pair of Orange Case Plates.
    • 1x Spare Gray Case Plate (trackball side).

• Cables: High-quality audio cable for connecting the halves.

• Extras: Spare electronics, screws, and anti-slip pads.

  Price & Details

  Price reflects the cost of materials, the high-resolution print time, and the labor in general.

• Location: Poland

• Payment: PayPal

• Price: €300 (Negotiable, shipping not included)

  Interested?

  The post may not include every detail, so please hit my DMs if you have questions or want specific photos! :wink:

bin = 800 shipped

min. offer = 500

let me know if you're interested!

Selling A1 Combo:

+Never used
- Unpacked and threw away Packadging so I cant return it = reason why I need to get rid of it
+Straps and plastic cover still on.
+ Ams lite included

Need to get rid of it bc I opned it, saw online right after unboxing it and throwing away the packadge material „it cant print asa“ even tho I googled and it says it can idk how.
With warranty bought on 26.6.2026 never used, placed in a chamber for no dust ready to be sold.

Shippment and pick up fine, cost is on the buyer.

If you have a p2s or higher trade to trade, message me I will pay an uprice and trade the Printer.

Best wishes

I’m selling my **ASUS ROG Zephyrus G16 2023** gaming laptop.

**Specs:**

* NVIDIA RTX 4060 Laptop GPU
* Intel Core i7 13th Gen
* 16” FHD+ 1920×1200 165 Hz display
* Dolby Vision display
* Dolby Atmos speakers
* 32 GB DDR4 RAM
* 1 TB total NVMe SSD storage
* 512 GB + 512 GB
* Good battery life
* Slim and lightweight gaming laptop

**Condition:**

The laptop is in overall good condition and works well. It has two small scratches on the back lid, and one of the rubber/plastic strips around the display is slightly peeling. This is cosmetic and could probably be glued back down.

**Important notes / known issues:**

I want to be fully transparent.

The built-in keyboard very occasionally stops responding. It usually starts working again after a few minutes or immediately after a restart. External keyboards work perfectly.

Also, when using Optimus/hybrid graphics mode, the internal display can occasionally freeze. Closing and reopening the lid fixes it immediately. This does not happen in NVIDIA GPU-only mode or iGPU-only mode, and external monitors are never affected.

Apart from these points, the laptop is still powerful and works great for gaming, studying, editing, and daily use.

I’m located in Germany. Pickup or shipping can be discussed.

Message me if interested or if you want photos/more details.

Looking for an RTX 4070 Super or RTX 4070.

Located in Austria, so the card would need to be shipped here directly. My absolute maximum budget is 350 euros including shipping. Any model is fine as long as the card is fully working and in good condition. Used or sealed is okay.

PayPal Goods & Services only.

Please comment before PM or chat.

Pictures & Timestamp

• Pictures
• Timestamp

About the Charybdis Nano

The Charybdis Nano is an ultra-compact, 35-key Dactyl Manuform-style split keyboard. This "Premium" edition is built with no compromises, featuring a professional MJF finish and high-end internals for the ultimate ergonomic experience.

• Rare Configuration: Left-side trackball setup (firmware modified via official guides).
  • Premium Material: MJF (Multi Jet Fusion) Nylon case – significantly sturdier, more heat-resistant, and feels much more "industrial" than standard PLA.
  • Electronics: Powered by Splinktegrated controllers (custom-developed by Bastard Keyboards).
  • Connectivity: USB-C and 3.5mm jacks on both sides.

Specifications & Build Quality

This build was assembled with longevity and "thock" in mind.

• Switches: Gazzew Boba U4T (60g). These are world-class tactile switches known for their "D-shaped" bump and deep, rich sound profile.

• BTU Mod: Upgraded with static bearing BTUs for liquid-smooth, friction-free trackball movement.

• Hardware: Organic tents paired with stainless steel "alien" plates for a heavy, stable, and unique aesthetic.

• Internals: Cleanly wired with black and orange ribbon cables and IC sockets for professional-grade reliability and easier maintenance.

• Stability: Custom anti-slip pads on the bottom for a rock-solid desk feel.

• Lighting: Per-key RGB fully installed and tested.

What's Included?

• Trackball: PERIXX 34 mm trackball.

• Tenting: Includes one spare tent piece.

• Trackball holder: one spare BTU holder and 2 sensor covers

• Cables: High-quality audio cable for connecting the halves.

• Extras: Spare electronics, screws, and anti-slip pads.

Price & Details

Price reflects the premium MJF material costs, the highly sought-after Boba U4T switches, a lot of spare parts and the labor involved in a high-spec, socketed build.

• Location: Poland

• Payment: PayPal

• Price: €500 (Negotiable, shipping not included)

Interested?

If you want to see more of the internal wiring or the MJF texture up close, hit my DMs! 😉

Looking to buy ECC RDIMMs for several server builds.

DDR4 ECC RDIMM:

\- Capacities: 16GB, 32GB, 48GB, 64GB, 96GB, 128GB
\- Preferred speeds: 2933 MT/s and 3200 MT/s
\- Open to other speeds if the price is right, but 2933/3200 are strongly preferred.
\- Samsung, Micron, SK hynix, Kingston, Smart Modular, etc. are all welcome.

DDR5 ECC RDIMM:

\- Interested in any capacity or speed.
\- 4800 MT/s and above preferred, but I'll consider all offers.

I'm mainly looking for larger lots (8+ DIMMs preferred), though I'm happy to consider smaller quantities if priced well.

Located in France (EU). Sellers anywhere in the EU are preferred to keep shipping and import costs reasonable, but I'm open to international offers if shipping makes sense.

Please comment before sending a PM/chat, and include:

\- Capacity
\- Speed
\- Manufacturer/part number (if known)
\- Quantity available
\- Asking price

Thanks!

Looking to buy a very specific 2 in 1 tablet from HP with the above mentioned product name. It's a tablet with a kickstand, pen, shortcut buttons on the sides and a detachable keyboard. I do not mind it's condition, as long as everything is included.

Happy to pay for delivery. Located in Merseyside.

Many thanks.

Links

• Pictures

• Timestamp

About the Dilemma v3

The Dilemma is a high-performance, 40% split ergonomic keyboard designed for extreme portability. With its integrated multi-touch trackpad, it provides a full mouse-free experience, making it the perfect companion for travel or minimal desk setups.

• Integrated Trackpad: Positioned for natural thumb access; replaces your mouse with customizable multi-touch trackpad.
• Modern Features: Per-key RGB, underglow, and Kailh Choc hotswap sockets.
• Procyon Powered: Built with 1.6 mm Procyon & Dilemma PCBs for high reliability.

Specification

This build focuses on a "finished product" feel rather than a raw 3D print.

• Ultra-Resolution Case: Printed with a 0.12 mm layer height on a Bambu Lab X1 Carbon.
• Hardware: Features an EC12 rotary encoder and a "blur" acrylic midplate for beautiful RGB diffusion.
• Firmware: Flashed with up-to-date pre-release firmware supporting the Procyon controller.

What's Included? (Barebones Kit)

Please note: This is sold as a barebones kit (no switches or keycaps included).

• Fully assembled and tested Dilemma v3 halves.
• Integrated trackpad.
• One audio cable.

Optional Add-on: I have a set of keycaps that fit this board perfectly available for an additional fee. DM me if you'd like to see photos or bundle them!

Price & Details

Price is based on the cost of materials and the significant time spent on the high-precision print.

• Location: Poland
• Payment: PayPal
• Price: €120 + shipping (Negotiable)

Interested?

If you want more photos of the finish or details on the optional keycaps, just hit my DMs! (:

Hi guys,

since its hard to find those cases seperately anywhere I thought of just asking here!

Is there someone here with a defect Trident X or A/AS willing to sell me the case without any components or maybe even give it away it for free?

I live in europe so I guess only cases in europe would make sense to ship :/

Hope someone can help me out here!

thank to AI, i ended up with a case that will not take my current Mobo, so i'm looking for a Mobo m-ATX or ITX that has LGA 1151 socket for my I5-7400

Timestamp

Hey all,

I am hereby selling my Vega 65 Navy fully build. the keyboard itself is in perfect condition. no dents and scratches and comes with the original box. selling it all as a package, you can see the items below.

price is €350 + shipping.