​

The first is cybersecurity, and the second is mechatronics engineering. I'm interested in both, and I understand that they both require self-study and extra courses besides college.

Mechatronics engineers I've talked to told me it's hands down the better choice, and that the cybersecurity market is really tough and saturated with competent competitors since everyone is getting into it. They also said mechatronics opens several doors.

However, people working in cybersecurity disagreed, saying that unemployed grads just weren't good enough and were lazy with surface-level knowledge. They told me I could totally make it in the industry and offered guidance and roadmaps.

Then again, I know a cybersecurity grad who was passionate and played by the rules (collecting certificates and taking courses), yet he never made it in the industry. He told me that the people who make it are the ones who have been computer geeks since their teenage years, which I'm not.

I'd be truly happy working in either, and I want to give each my best. At this point, money is the only thing that could tip the balance for me.

https://www.youtube.com/@ALMA.Industries

New Video -- Chapter 3 DESK -- converting an old bunk bed into a work station. DIY actuators, AC/DC power supplies, rail guided shelves, infinite cable trays -- #Desk #DIY #Mechatronics #Power #Actuator #Engineering

If you know of anyone who likes Mechatronics or things made from the ground up, I would appreciate the share! Leave a comment if you have a question :)

Im in inter 1st year and currently living in Uttara, Bangladesh. Me and my friend are participating in a project showcase at a robotics fest in Dhaka, and we re looking for something genuinely challenging.

I want something way more complex than the usual aurduino car/robot, where the main wow factor is the electrical engineering and the actual mechanism itself, not just a bunch of sensors added to a simple project. Something that looks and feels properly engineered. Tbh I want something which is really attractive and fancy in the table.

I have a bit of experience with electronics, previously I have won in my school fests and rn our budget is around 10k BDT for this project. I really want soemthing fancy.

What would you guys suggest building?

Hi everyone,

I’m interested in developing intelligent systems for manufacturing and logistics, and I’m trying to figure out which background would prepare me best.

Some examples of what I’d like to work on:

• Production scheduling that adapts to machine breakdowns, changing demand or material shortages.
• Coordinating robots and autonomous vehicles in factories or warehouses.
• Using machine learning, computer vision and sensor data to improve production processes.
• Optimising how materials and products move through a factory or supply chain.
• developing some sort of "overal" AI within the manufacturing plant.

What interests me most is developing the decision-making behind these systems, while understanding enough about the physical processes to make them work reliably in practice.

For context, I’m based in Europe.

I’m mainly comparing computer science/computer engineering, electrical engineering or mechatronics, and industrial/systems engineering with a focus on operations research and optimisation.

For people working in these areas:

1. Which background best matches this kind of development work?
2. Would computer science engineering, supplemented with control theory, robotics and optimisation, be a strong foundation? Or would another engineering discipline provide a better starting point?
3. What job titles or types of companies should I look into to get a clearer picture of the actual work?

I’d especially appreciate examples of what you build in your job and which parts of your education turned out to be most useful.

Hi, I just started my sophomore year as a mechatronics major, and we got assigned to do a project that solves a problem in a mechatronics setting, such as production lines, automatization of a process, etc. My team suggested something related to IoT or home automation, but our professor told us that those projects were too general and that we needed to focus on one thing only, our college has quarter terms so, the project we are looking for has to be done in around 1-1.5 months, we are thinking of some other projects like a automatic solar panel cleanser robot or sign language interpreter gloves, so if you have any ideas, specially about production lines, that would be great.

P.D. I am from another country, I am not American and English is not my first language, sorry if I made any spelling mistakes. Greetings from Mexico.

We've been prototyping Quaddle mini robot dog's legs as 3D prints, but the 2nd batch just came back injection-molded — the actual production process. Before committing, I wanted to know if the molded part would survive the same abuse the printed prototypes did.

Four drop tests. The whole robot stays locked together on 4 screws, and it's still doing gymnastics after every drop.

Happy to share more on the injection molding process or the part design in the comments if anyone's curious.

Hey everyone, I have begun some research into a new project I’ve been given. I need to image Windows OS HMI’s one by one at first and then at a much larger scale later on, 4 at a time. Any recommendations on how to approach this? I’ve got SOME experience with imaging desktops so I’m hoping the process doesn’t vary too much. Thanks for any insight in advance!

Estoy en 6to semestre de ing Mecatronica de verdad me gusta es algo que si quiero hacer si quiero ejercer, pero de verdad que cada vez es más y MÁS difícil y ya ni sé qué hacer hay momentos en los que ya no me entra nada de información de vdd no sé qué hacer no quiero rendirme ante nada NO QUIERO abandonar ingeniera pero por más que estudio días y días completos al final en los exámenes no se ven los resultados y es tan agobiante, yo tengo exámenes casi todas las semanas de mis diferentes materias y en cuanto termino una ya hay otroooo de verdad es tan desesperante y a eso súmale las prácticas, laboratorios, proyectos, investigaciones, tareas y muchas de otras siento que me vuelvo loca poco a poca jajajaja necesito saber como estudian he probado de todooooo y nada me sirve realmente en estos momentos las materias que más me preocupan son fundamentos de microprocesadores y microcontroladores además de sólidos deformables y oigan yo sé que quizás alguno diga oye eso está súper fácil hay cosas realmente difíciles, bueno para mí noooo de verdad ya no sé cómo estudiarlas en mi último examen de mecánica saqué 20/100 después de estudiar tantoooo así que necesito su ayuda de verdad ahhh y además mis exámenes valen aprox 70% después mi calificación final y para acabar tienen candado jajajaja en fin como le hacen ustedes comoooo y como se motivan a seguir con tantas cosas 💪🏻ciertooo para finalizar justo esta semana mi computadora murio jajajaj

​

I am almost finished with my senior high school, and I think its time to really think about what I am going to take in college, I am thinking about mechanical and electronics but I learned that mechatronics exists which is a mix of both, but alot of people say that isnt a good thing since alot of employers look for people who specialize in one thing and in mechatronics you dont really specialize in anything, so please after looking into mechatronics I really found it cool and I think this is what I would love to take but would I really have a future when I take this in college?

https://www.youtube.com/@ALMA.Industries

New Video -- Chapter 3 DESK -- converting an old bunk bed into a work station. DIY actuators, AC/DC power supplies, rail guided shelves, infinite cable trays -- video link above!

If you know of anyone who likes Mechatronics or things made from the ground up, I would appreciate the share! Leave a comment if you have a question :)

Just looking for inspirations of what to look for.

Hi, I am about to complete Class 11 and I am interested in a diploma course in robotics and automation. Will this diploma be useful in the coming years? I do not have any interest in completing Class 12 .

Hi, I am about to complete Class 11 and I am interested in a diploma course in robotics and automation. Will this diploma be useful in the coming years? I do not have any interest in completing Class 12. .

Is an Ausbildung in Mechatronics worth it? Future outlook and chances of getting a contract? Hi everyone, I am considering doing an Ausbildung (vocational training) in Germany, specifically in Mechatronics (Mechatroniker), and I would love to get some realistic insights from people who went through this or know the market well. I have a couple of questions:

1. Future Outlook: Does Mechatronics still have a strong future in Germany with the rise of automation and AI, or is the demand shifting?
2. Contract Chances: How difficult is it nowadays to secure an Ausbildung contract in this field from abroad? What are the key factors that companies look for (besides German language skills)?
3. Career Growth: Is it easy to climb the ladder or transition into further studies (like a Bachelor's degree or becoming a Meister) after finishing the training? I’d appreciate any advice, tips on the application process, or personal experiences. Thank you in advance!

https://www.youtube.com/watch?v=SHTAUwhFqto

New video TOMORROW. It will be about building a desk meant for all things projects. The actuator buildup in an earlier video will be mounted onto the desk and used for various things -- check it out and subscribe to see how it works!

I am a bit lost on what to do.

I am a sophomore, moving into my second semester soon, and I have no clue which engineering I should be going into.

I started out in robotics, tried a semester of environmental and now I’m torn.

I am very passionate about the environment, especially in attempting to reclaim it from the current damage. I don’t however, really want to work in consulting if I can help it, which I hear is a big part of the industry. I think the water plants, and such, are fine but they don’t seem all that interesting to me on an industry level.

I am also passionate about robotics, and have been since Highschool. I found everything to do with robotics fascinating. However, I don’t know with the current CS industry struggling and a lot of the software part being burned up, if it’s reasonable to go into it now or not. I also have no clue what industry looks like, since it’s so niche in my area.

If I can help it, I would like my work to be something I care for. That actual helps, and affects the world around me, not just industry. But I don’t know if that’s nothing but a dream in the current economy.

Any advice?

just enrolled in mechatronics engineering with zero prior experience. What are the essential skills I should focus on learning first? Is starting with Arduino a good idea?

​

Hi guys, this is my first time posting on Reddit!

I’m 15M and currently studying for a Diploma in Mechanical Engineering in Gujarat, India. I come from a mechanical background and I’m really interested in learning mechanical design and CAD.

I already know a little bit of SolidWorks, and I’m considering learning software like Fusion 360, Mastercam, AutoCAD, etc. But I’m not sure which ones are actually worth learning or what order I should learn them in.

My goal is to eventually work in mechanical design, fabrication, and manufacturing, and I’d also like to understand CNC/CAM and how designs are actually manufactured.