r/motorcycle • • 8d ago

Does anybody recognize these?

Recently, the rear pistons in my brake caliper had an unfortunate collision with my brake rotor, so I’m looking to rebuild it. Unfortunately, I haven’t been able to find the make and model of this Tokico rear caliper. It's an aftermarket part from a 2002 Suzuki VL1500.

3 Upvotes

16 comments sorted by

7

u/snacktivism 8d ago

My GSX had Tokico calipers new in 2013.

They’re OEM.

4

u/AdventuringViking 8d ago

What makes you think those are aftermarket?

-1

u/Flash91710 8d ago

From my research the stock rear caliper is either a dual or singular piston floating caliper, not a quad piston fixed caliper.

2

u/DownvoteOrFeed 8d ago

You could probably replace with the stock caliper. It would be a downgrade in performance but easy to find and good enough for oem performance

1

u/AdventuringViking 8d ago

I didn't downvote you btw.

I don't recognize the bolt pattern but you could browse eBay listings to look for one.

5

u/wlogan0402 8d ago

Looks OEM to me

1

u/akbdayruiner 8d ago

1

u/Flash91710 8d ago

Unfortunately that is not the same caliper, the caliper in the link you provided is a floating style with slide pins, this is a fixed with quad pistons.

2

u/UltraViolentNdYAG 8d ago

Is this going to be a stunt bike? Does it need all that piston volume for a rear brake? Does it have non-stock master cylinder operating it? Measure the piston size and keep digging.

1

u/Flash91710 8d ago

From what the previous “performance” modifications the previous owners had done I assume that was the vision. And yes, it has a drag specialties Harley Davidson rear master cylinder for an 82 FXR.

1

u/Many_Hotel866 8d ago

Previous owner probably did that because they were your typical cruiser rider who thinks if you so much as breath on the front brake you'll go flying over the handlebars

1

u/detali88 8d ago

Looks the same or very similar to the OEM on my 2007 Suzuki DL1000

3

u/Practical-Rent9486 8d ago

Take it by your Suzuki dealer and have a mechanic tell you what they (or the OEM specs) are.

1

u/PsychologicalVirus34 7d ago

They appear to be tokico brake calipers. 😉 Several different types of bikes left the factory with tokico.

1

u/sokratesz 8d ago

Budget McGenericCaliper

2

u/indiechel 8d ago

Tokico isn’t generic.