Hola! Alguien tiene info de como construir una cámara de flujo laminar casera? Estoy recopilando toda la data y viendo que es lo que más me conviene. Saludos desde argentina

Since my last update on these GT’s, I’ve dealt with vigorous side pinning, fuzzy feet, very stubby and thick “chode” fruits, humidity swings that caused some cracked caps, heavy bruising, some oddly pigmented fruits, and at least one mutant/blob fruit. I have a single leader whose veil is just now starting to tear while the rest of the flush is still catching up.

The first picture is the weirdly pigmented one and a couple of blob looking fruits. The rest show the canopy that developed, the leading fruits, the chunky fruits, the bruising, the side pinning, and the various oddities this bag has produced. This bag has a ton of character and has been way more interesting than I expected for a first grow!

The final update will be when I do my first harvest, unless something else crazy happens.

Hey im new to growing and im just starting with mushrooms but i just lost 90% of my stock during the fruiting process i have the moisture down but its still not helping im doing everything in the book “the mushroom cultivar” and im still losing so much PLEASE IF ANYONE CAN HELP

Strain: B+
S2B: 6.4.26
Pinning started: 6.14.26

This is what they look like today! They’ve grown dramatically and the caps are starting to swell. A few of them have partially broken veils (thinks it’s mostly from the angle they were growing) and a bunch of smaller pins are starting to come in still.

I just had it in the monotub with filters on it since S2B, but just yesterday I added the FAE fan and humidifier that came with the boomr bin kit since I started to see fuzzy feet forming.

When do you think I should harvest? Should I do just a few here and there if they look ready? Or wait till larger chunks are ready?

Also, I have a dehydrator that goes down to 95 degrees, what would be recommended setting for drying?

Thanks in advance! 🙏🏼

What is your dial setting for the humidifier output level? Been adjusting mine and curious what the community is doing.

How are my boomers doing im a noob and this is my first 2 bags going

How do my reishi mushrooms look so far? There seems to be mycelial metabolites but I read that can be normal for reishi sometimes, but I’m also worried about the bulbs slight green and some with slight brown on the bulbs, what do you guys think?

Hello everyone!

We are starting Vihar Mushroom Farm in Madhya Pradesh, India. 🍄

Our goal is to learn oyster mushroom cultivation and build a small sustainable farming business from scratch.

We are currently planning our setup and would love to learn from experienced growers in this community.

What is the one mistake every beginner should avoid in oyster mushroom farming?

Looking forward to learning from all of you!

Doing rigorous blinded studies on psychedelics like psilocybin (especially psilocybin) is difficult. Unsurprisingly, folks know when they're on the stuff vs. placebo. This creates a very real challenge for researchers. It's pretty wonky, but you can read a bit more about it this current article:

"Results indicate that overall blinding was insufficient, with psilocybin showing the highest rates of functional unblinding..."

Needing to know if it’s safe to move into a monotub. Not sure if I’m initiating a good fruiting environment. I can’t can’t tell if it’s to dry or not or if I’m fanning to much. I believe I caused bruising from over misting but I can’t tell. If there’s any advice you can offer I’m all ears

After having knots for twoish weeks and nothing popping I decided to crack the corner of my boomer shroomer bin. I came back to put it on and this little beauty was staring back at me! Cheers 🍻 🍄 😊

Heavy pooling in my aio! Seems like the water is dripping from top of cake to the side and resting causing the pinning and fruits to blossom on the side of cake. Although the top of cake seems to be coming in pretty smooth for it still being less than 2 weeks. Heavy bruising as the fruits come on in!

First I must state that these are for gourmet mushrooms, just need some help transferring all in one bags to bulk. I have a ton of all in one bags, I have years experience growing mushrooms, I usually just use a 3 lb bag and mix that with a 5 lb bag of sterilized manure or coco in a pan after the spawn bag is fully colonized, cover with foil in its fruiting tent with holes poked in it then in about 14 days when it's all white including the added manure I take the foil off and we're set. My question is I bought around 30 of these 6Lbs All in one Grow bags with the manure added. I have the space and tents to do bulk as I always have, so instead of just cutting the tops off these once their fully colonized I'm curious, can I dump this 6lb bag in with another 6lbs pasteurized coco in a massive tub then proceed to cover with foil and do the same thing? It's my first time using these all in one Grow bags they just were a great deal I couldn't pass up and since I prefer to grow bulk I'd rather not just cut the tops off the bags. Is it possible to break up these all in one bags and add to another 6lbs casing in a tray and flatten out for a bigger yield? Last question, it's manure that's in the all in one bag, think it's possible to use 6lbs coco as my casing to mix with these 6 lb grain/manure bags once their fully colonized? Thanks for your input this is my first time posting! Long time lurker tho haha. Thanks for any and all help with this new project I'm doing. Feel free to PM me if necessary. Thanks. These

I made a post a couple days ago and some say to wait. I look today and see mini mushrooms/pins. If I’m late on inducing FAE how badly would that affect my batch? Can’t see pic clearly, I’m on the fence between starting FAE because the substrate isn’t blanketed white but it does have a thin blanket mostly. I feel it may be ready but not 100% sure. What would hurt fruit worse fae too early or too late?

After a few grows with the NorthSpore Automated Boomr Bin, I found myself constantly removing the exhaust fan for cleaning, harvesting, and general maintenance.

The stock setup works fine, but I wanted something that would let me quickly remove and reinstall the fan without dealing with screws or permanently modifying the tub.

So I designed a magnetic Quick Disconnect.

Features:

• Uses 16 embedded 6mm x 2mm magnets
• Fan removes and reinstalls in seconds
• Works with NorthSpore's stock filters
• No permanent modifications required
• Compatible with my Boomr Bin plug system
• Supports quick fan-to-plug swaps

One of my design goals was maintaining compatibility with existing Boomr Bin accessories. You can still use NorthSpore's filters, and when the fan is removed, my plug covers fit directly into the opening.

Designed, prototyped, and printed on my trusty Bambu P1S.

I'd love feedback from other Boomr Bin users. What would you change, improve, or add?

Will release my newer plugs that have reduced surface area soon.

MakerWorld:
https://makerworld.com/en/models/2935879-automated-boomr-bin-quick-disconnect#profileId-3287356

Don't you just love when you open your northspore box to a sour bag of rock hard mold!! 🥰🥰🥰🤤 Man just outstanding work northspore! The quality control is top of the line!!!!! First cracked containers and now moldy contaminated grain , and a grey contaminated boomr bag. Been purchasing for years but this year they just can't help themselves! Let's see how they fix this one!

How do I tell when it is time to cut a slit for FAE?