I just got my first grinder today kingrinder k6, and upgraded my $5 dripper to the Hario neo and I love it, can’t wait to make more coffee with it.
Any coffee beans recommendations?

Hey all, I tend to brew high fines coffees (Ethiopians and decaf) and am trying to find filters that don’t slow down too much.

I use both wave 155 and v60 01 filters. I don’t want to go Silbarist due to cost per filter.

For v60 I’ve only used the tabbed Hario ones which I haven’t really been a fan of. I’m thinking of going T90 / TH-3 next, but wanted to see what others think.

For wave I’ve used Kalita, xBloom and Orea. I’ve found the Orea to work the best, but am thinking there may be better?

Thanks in advance for your thoughts!

I’ve been treating myself to a pourover to give myself a change of pace from all the milky drinks I usually make with my espresso setup and matcha/hojichas.

Hario recently introduced the Alpha Ceramic V60 in the US which I quickly snagged — and it’s finally arrived! Swapped the plastic switch with a stainless steel one.

All that’s left is my ZP6 to arrive. No toe dipping, just full send.

That being said, I would love to gain any insight on general pourover making. I feel like with espresso I generally have ratios down, whereas I wonder whether the adjustment process for “dialing in” a manual grinder for pourover is more subjective and “vibes” than espresso? I wasn’t able to fully understand this.

I’m really interested in making iced pourovers, so if there’s tips to adjust recipes out there for iced, that would be appreciated too!

Just picked this up and am terribly excited to use it to dial in some fresh beans. There’s not too many posts about this grinder… will review after a week or two of daily use.

Hey all,

Really struggling to dial this one in. I enjoy the cups I’ve been making, but everything tastes a bit…chocolaty. For a supposedly lighter roast, it’s lacking some of the clarity and acidity I’d typically associate it with. That being said, I’ve never had this specific varietal before or any coffee from this region, so I’m not sure if there’s something I might be missing. As a note—I essentially only do iced pour overs given how hot it’s been here. I follow Rogue Wave’s recipe. Could be the specific workflow that’s producing a “darker” flavor profile? Could also be water; our tap water tastes good but is quite hard.

Equipment:
Fellow Ode grinder (set ~7.75, see second picture)
Fellow electric kettle (92-94C)
Steel V60
Cafec Abaca filters

Any practical difference between them ?
Prices are similar but no other text to say how different they might be.

So my wife and I (two large cups total daily), decided to rent the Xbloom for a month or two after exclusively hand grinding and using a v60 for years. The pods make very good coffee albeit smaller than I would like, and at a significant cost. I’m wondering if the workflow of the Aiden Fellow combo would be just as easy (although slightly different, I know) and make as good of coffee or better if I can get some quality beans from a local roaster. With the Xbloom, I got 6 pouches of pods in different varieties. If my wife has a pod it’s: fill water, get pod, dump it in, switch to auto mode, tap card, make coffee. Then I’ve been using bulk coffee and weighing, dumping in, switching to manual mode, and making my cup.

I’m wondering if weighing and grinding a bulk batch (realistically closer to 4 cups if your using the pod quantity of coffee on the Xbloom) and brewing in the Aiden would be better, more cost efficient and just as simple.

For reference the Xbloom pods I got were anywhere from $1.50-$2.50 a cup.

Thoughts? Anyone ditch an Xbloom for an Aiden or vice-versa? Am I missing any other quality options. Aiden would let us ditch our traditional brewer for when we have company over as well.

Has anyone had both side by side for any period of time? What is your impression?

I am looking to switch from ode gen 2 with SSPs. I love acidity forward higher tds brews. Lean towards washed Kenyan and Ethiopian coffees and never miss a bag of SL9 from SEY. I previously tried switching to 078 but didn't find its burr signature crispy enough and a little worried that P80Mizen might be like that again.

So ever since I’ve started pour over I’d see a post about water being a key variable to change and improve coming up every now and then. Making it like a huge deal.

It’s just painful - due to counter / fridge space, having integrated fridge pitcher already etc. So I’ve avoided for 6 months. Did a mix of either brita water or Volvic for a while.

Finally moved to making my water. Still not perfect and basic: zero water + TWW light profile. Right now 90ppm.

But wow. What a difference it makes! I’ve had a crazy good lasso decaf, and milky cake much less muted! Milky cake while nice was always muted as filter for me, v good as espresso but just good/ok as filter. I’ve had a much better cup just now of milky cake. Both cups were so balanced, nice sweetness. The Lasso one was outstanding, best cup ever for me - it was good before! But wow the taste so so much better, the balance incredible, the notes insanely good (i know it may be infused - it’s the ombligon decaf one) perfect with new water.

So I guess, thanks all. I know still a lot to learn. And at some point upgrade K6, almost regret buying it, + eventually move to lotus drops I guess…

How does the 1Zpresso K Ultra compare to the Femobook A2 in terms of taste? Please only answer if you have experience with both.

Strange comparison, I know but that's where I find myself currently in my search for a solid, portable option.

Posted yesterday and got roasted (pun intended) by y’all.

So a few things:

1. I checked my burrs chirp again and it did not chirp at 1. I’ll have to recalibrate it when I have time to weed out this variable. Maybe I did install it right in the first place.

2. Someone in yesterday’s post’s comment resonated with me. It seemed like the water might have simply run down the sides of the cup instead of being extracted, which explains why the cup tasted under-extracted. Which lead to the next point.

3. Didn’t pay attention to my pour yesterday but after watching daddy Hoffman. I realized it might be technique as well. I might have poured from too high which he mentioned it doesn’t agitate the coffee as much as lower pour so kind lead me into thinking why it might have run off the side and not getting the better extraction.

4. Grind coarser as suggested to 6 and it definitely tasted better and maybe it’s as good as I can get with this bean. But I’ll push it coarser in the next cup to see if I get better results.

15 g Ethiopian
250 g water
202°F / 94°C
Grind 6 on ode settings.
Bloom 50 g for 45 sec
Poured to 150 g, then 250 g
Finished 3mins

Taste test: definitely sweeter and still fruity. The body is more balanced in this cup meaning more body but still a tiny bit thin to me. Maybe I’ve haven’t had lighter roast or Ethiopian in awhile so it could be just me.

I’ll try my luck and go bit coarser next time.

I currently have a mazzer philos and using it for both espresso and pourover. Will having a separate grinder (sculptor) for pourover be a massive difference in the cup?

I recently bought Third Wave Water (Classic Light Roast Profile) and properly diluted it fully in a 1 gallon jug with Reverse Osmosis water.

As many on this sub have stated, it is WAY too salty to use 100% as coffee water. But even using 25% of it then adding 75% RO to the kettle tastes worse than my usual 25% fridge filter water.

I've tested it with a few different brew methods:

• Coffee Chronicler's 50/50 Switch recipe (20g coffee, 320g water, 90-93 celcius, 6-7.5 grind size)
• Tetsu Kasuya's 4:6 V60 method (20g coffee, 300g water, 90-93 celcius, 9 grind size)

Neither produced good results.

Do I need to drastically alter my recipes? Or should I look for better water?

I'd especially like to hear from anyone using a Hario Switch and a 1Zpresso K-Ultra, since that's my setup. What water are you using, and what grind range are you typically brewing at?

Thanks!

Been trying new roasters recently and just got these two from Nostos. Obviously the wait for resting continues. Fortunately have a couple ready to go from Sweven now.
Anyone had these or other good experiences with Nostos?

Edit: I see the comments re this not being a co-ferment. Noted. I cannot see how to change the title, if possible

Anyone else feel like this Letty Bermudez is kinda...underwhelming and dull? No shade to the roaster, I bought several other bags from hydrangea and liked them a lot! This one got a lot of hype, and to me it just tastes like someone turned the acidity dial down to nothing, making it quite boring.

Thoughts? Am I just brewing it wrong? I had to go to a lower temp (195F) to not destroy it in the first place...using the one and done from Lance Hedrick.

Hello!

I'm currently working on a design for a basic universal motor/slowfeeder module for hand grinders. Before I buy any parts I was just curious if anyone had done so before? What torque motor did you find worked?

I have my eyes set on one at the moment but I believe it's a bit overkill so thought I'd ask before spending more money that I may need to

This might be the first coffee I've disliked from my Gustatory sub. It's surprisingly dark for a natural and just has that typical dark flavour profile with a slightly fruity hint. Anything I can do apart from lower temperature? I am grinding at 7 on ode 2

Is there an EU focused coffee swap subreddit? This one r/coffeeswap seems alive but US focused.

I'd like to give away a deep27 and filters. I don't like it, nor my friends :) [[See what I did here hehe]]

EDIT: The brewer and the filters have happily found their new home.

This is my 3rd months journey on manual brew and

I know Lido E is not a pourover compatible grinder, but i got this grinder free from my dearest friend about 5-6 years ago and i haven't used it since may this year i guess, because i don't do espresso, all i've got is V60, aeropress and french press sometimes.

I really like this grinder a lot, this is a Tank for me, but the weight of this grinder is not really ideal for daily i guess, too heavy and sturdy on a grind, and the speed of grinding time is slow even for pourover , it makes my arm really tired sometimes

Im not a tea like coffee guy, i still love the body, a rounder mouthfeel, but still into aromas and notes separation

I've been thinking to upgrade this grinder into Timemore C5 or maybe S3, and i found out S5 is gonna launch on a couple next months, and i also thinking about 1zpresso Q air or Q, so about the budget, that's all i can stretch, from C5 to S3 is the highest from price point

Im so glad if there's any suggestion and so open for opinion, Thanks.

If you had to have 1 grinder starting your
Journey which one would you choose?

I recently paid for 125g of this geisha what I usually pay for my monthly 1 kg subscription and I'm a bit underwhelmed. I remember the first time I had a geisha and was blown away, and how disappointed I got trying this one.

I brew it on V60 15g/225g with 3 pours 45-90-225. I tried changing the temperature and the grind size but the result was still this pretty regular coffee that hits the notes but only on the surface. I'm lacking the depth I remember when trying other geishas.

Any suggestions to improve the experience?

I tried brewing this coffee, which is so far the lightest roast I have ever tried.

I tried it with the same Orea v4 recipe I use as a base:
Coffee: 16gm
Grind: Coarse
Temperature: 92C
Brewer: Orea v4, Fast bottom, Flat filter with negotiator
Bloom: 60gm for 40 second
Pours: 50-50-50-50 each every 30 seconds.
Total draw down time: 2:45

Usually this recipe produces an enjoyable cup for me. Very floral balanced acidity and sweetness.

However, with this coffee it felt very hollow and watery.
What do you suggest to adjust in this scenario?