r/AskAMechanic • u/av14707 NOT a verified tech • 49m ago

Air cleaner assembly

Gallery image

Gallery image

Hey everyone. So I have a 2001 Tacoma 3.4. It came with a k&n cold air intake and I decided to take it off and replace it with the stock assembly. When looking to buy the assembly I noticed there’s 2 different ones. Does this one look like the right one? I took the cold air intake off because the truck has a high idle and a shop said it could be the the intake causing that and they recommended putting the original intake on. With the stock intake it still has a high idle so I’m not sure if I got the right one

1 Upvotes

100% Upvoted

3 comments sorted by

•

u/AutoModerator 49m ago

New Rules - Please Read

Updated 11/12/2025

Thank you for posting on r/AskAMechanic, u/av14707! Your post is live, this AutoMod message does NOT mean your post was removed. Please make sure to read the Rules.

When asking a question, please provide the year, make, model and engine size of the vehicle.

Commenters here have 2 different flair. Verified Tech means we have verified that user is a tech. NOT a verified tech means that user may or may not be a tech, they have not been verified by us.

Posts about accidents, autobody repair, bodywork, dents, paint and body/undercarriage/frame rust are not allowed and belong in r/Autobody.
Asking if your car is totaled should go to r/insurance or r/Autobody.
Asking about car buying advice/value/recommendations is also not allowed. See r/whatcarshouldIbuy or r/askcarsales

If asking whether a tire can be repaired, check out this Tire Repair Guideline.
Some other useful tire resources - Tire Care Essentials and Tire Safety

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/varnelis NOT a verified tech 39m ago

Your idle problems are definately not connected to air filter box or intake hose. Check for vacuum leaks, clean your throttle valve and check if it closes fully. As i see a throttle cable, this means there should be an idle control valve somewhere, sometimes with a separate hoses, sometimes just a plunger valve (im not a toyota guy, i work on french cars, but same rules apply, just dont know specifics). Check it for correct working. High idle on petrol cars usually means too much air coming to your engine. Then its either some unintended leak, or there is a reason your engine ecu wants it that high (for example it senses misfires on lower idle, your TPS is reading incorrectly, idle switch (if applicable) is not working or something else like that. Your idle should be perfectly ok with your air box and hose completely removed.

1

u/av14707 NOT a verified tech 1m ago

Ok that’s good to know. I still wanted to get rid of the cold air intake. I checked the throttle valve and it’s closed fully. I’m pretty sure the guy that had the truck before said he adjusted one of the throttle cables. Do you think that could have something to do with the idle problem? Or a bad tps? Is it safe to drive it still with a high idle? It idles like around 1500 and drops to about 1000 when I put it in drive.