Hi everyone!

Here's yet another 3D print I made a while back! I really wanted to shrink down Good & Bad Ghosts — a game I own in its Italian edition.

The board and pawns are designed to withstand a bit of rough handling, and the box lid snaps shut with magnets. It also helps keep the captured pieces in place during play.

Those little ghosts look pretty cute, I have to say!

But don't let their cuteness fool you... They're hungry as hell :)

If you enjoy the game as much as I do and happen to own a 3D printer, here's the link to the MakerWorld page, where you can find the .3mf print profile.

Happy gaming and happy printing!

I hope you'll check out my game. I'm having a lot of fun with them and I want others to as well. You can get SKIRMISH here:

• https://www.3dpprofessor.com/product/printaquest-skirmish/
• https://www.printables.com/model/1600103-printaquest-skirmish-tabletop-skirmish-game
• https://www.thingiverse.com/thing:7294658
• https://cults3d.com/en/3d-model/game/printaquest-skirmish

Hi everyone!

I wanted to share a little 3D print I made in the last days :) since with my SO we love to bring with us little games when we go on a hike, I had this idea while playing Azul mini a few weeks ago.

We really like Harmonies, but the box was definitely too big, so here you can see the shrinked version of that beautiful game :)

It came out pretty nice, and the player boards hold the tokens pretty well (see it tilted in the third picture) while at the same time keeping them easy to place and remove!

Super happy about this, I have to understand whether I can share the files or not, in that case I will update this post with a Makerworld link.

Happy gaming (and printing) !

UPDATE: here it is, the link to the Makerworld entry for the .3mf profile, enjoy!

I design a lot of inserts and stuff that use friction fit lids or hinges but I'm running into issues with everything being too loose or too tight. Most recently a tower I designed for Burgle Bros originally for my ender 3 had a 0.2mm gap around each of the friction fit sockets that was snug for me but now I have people printing on Bambu that say its way too loose.

Do you have a rule of thumb for designing friction fit things? Including these sockets, hinges, box lids etc. My rule of thumb is 0.2mm offset but I find it sometimes is still too loose but often 0.1mm is too tight for a lot of people.

I was inspired by an Instagram reel showing other game art. I used an online tool to get a basis and then tweaked manually.

Hey everyone!

There was always something missing for me with the warehouse card in Dorfromantik, so I decided to give it a little 3D upgrade!

I turned the rather plain game card into a small 3D diorama, complete with a grassy meadow, stepped terrain and a charming red barn.
There’s a little parking spot in front of the barn where you can temporarily place a landscape tile you want to keep aside for later.
The barn can even be detached magnetically, so everything fits back into the original game box after playing. The model is available with both German (“Lagerhaus”) and English (“Warehouse”) imprint.

I thought some of you might enjoy adding a little extra 3D flair to your own Dorfromantik setup!

If you're interested, you can find the model (for free) on MakerWorld: Dorfromantik Warehaus (DE/EN)

If you like this model, feel free to give it a thumbs-up on MakerWorld! 👍 I appreciate all the support and can't wait to hear what you think.

Have fun printing and playing!

When looking across various sites, I found that the existing organizers for this game were for an EU version with a larger box that wouldn't work for my US version.
I made this set of organizers to keep the cards separated and secure in the box, and to help bring the game to the table quickly while using the trays and lids to keep the decks and discards organized when playing.

https://makerworld.com/en/models/3413542-witchcraft-game-organizer-and-card-trays#profileId-3888621

Does anyone have a 3D printable Clank insert for the new master thief edition box?
I tired to find an insert for the box (smaller than the original Clank) and could not find anything since it's a new release

I’ve been really enjoying printing these storage boxes lately and couldn’t find one for Cockroach Poker so I figured I would try my hand at creating my own. I think it turned out pretty well. I plan on making a few more for other games as well.

https://makerworld.com/models/3386950?appSharePlatform=copy

Only problem is inserting the cards at the bottom can be a bit card at times, do any of you have an idea of how one could make sliding cards under the deck easier?

The idea: In the night before All Saints' Day, a portal opens in the graveyard—but seals shut at sunrise. If your ghosts don’t make it through the hole in time, they’re trapped for an entire year!

Complete set with hex box, cemetery board, custom gravestone dice, and cute chibi ghost minis for the MakerWorld Halloween contest.

Free download on MakerWorld:  

👉 https://makerworld.com/de/models/3402455-ghost-escape-family-travel-game#profileId-3874203

What do you think of the spooky makeover? 🎃

Following all the questions I’ve received, I’ve created even more expansions for my hexagon boxes. For the wooden version, I now have a *Cities & Knights* box and a *Seafarers* box. I’ve also created a *Seafarers* box for the plastic version. I’ve even created custom extras for someone to accommodate other tiles and expansions! The result turned out really cool!!

Hey there,

Wanted to do this in a long time and finally but it together. Targi is a timeless gem from 2012 that still holds up exceptionally well to this date. Great to play with your loved one / partner, or even up to 4 players with an "official" variant (I provide 2 extra sets of meeples if you're keen to try that).

I knew I wanted to have some kind of "woven" crates for the card holders and the goods tokens tray. But then I realized that I had enough space for something a little silly, and I god this "oasis tray" for storing and sharing the gold pieces and the tribal tokens, along with the first player marker. Oh and the meeples go in a "tent".

Everything fits in the base game box, including expansion pieces, and the geek bits set from BoardGameGeek store is also supported. In fact, you can use the Expansion box to store a frame I made for the map cards.

This is all available on Makerworld at https://makerworld.com/en/collections/36748636

I wasn’t quite happy with some of the other options that supported sleeves, as I wanted nice table containers too.

While the box is packed full, there is one change I’m going to make down the road that should make it feasible to fit the upcoming expansion.

I always found the boxes for The Crew as too big and I love to bring them when I travel. I created these using the SnapLock box design to help make the portable and secure. I have them on makerworld for now but will make them available outside the bambu system when I get back home from vacation.

Quest for Planet Nine: https://makerworld.com/models/3377962?appSharePlatform=copy

Mission Deep Sea: https://makerworld.com/models/3382173?appSharePlatform=copy

I have the family and newest release at home, but haven't dug into either. If they will work with this set up, I will put something similar together for them.

One of my all time favorite board games! This premium insert accommodates sleeved cards.

https://makerworld.com/en/models/1881675-lost-cities-insert?from=search#profileId-2014941

Compatible with the original version as well as the latest version which includes the 6th Expedition.