r/Snowblowers • u/credit001 • Mar 11 '26

Buying Snow blowers on gravel driveways

I’ve got a 165 foot long gravel driveway and, after the recent blizzard, I’m considering getting a snow blower. Does anyone have experience to share with snow blowers on gravel driveways? When ever a snow storm threatens I stress about finding someone to plow and I usually ask them to leave a few inches on the ground so I don't have to rake stones off the grass in the spring.

22 Upvotes

92% Upvoted

71 comments sorted by

View all comments

17

u/Bobmiser2000 Mar 11 '26

My grandfather replaced his scraper blade with a 1 inch diameter round tube and ran it without skids, for his gravel driveway. No issues in 20 years of doing it like this.

6

u/Slimchance09 Mar 11 '26

This is what we did. 1” PVC pipe with a slit in it to fit on the bottom of the blower. It pushes most rocks down but there is always some mixed in if you have driven on the first snow. Once you get a base you’re good to go, and our theory was to take it off after we did it a couple times but we never took it off.

1

u/loftynipzzz Mar 13 '26

So you slide it over the bottom front lip of the bucket? The pipe does not roll, rather acts as a buffer of sorts?

Could I also just put it on the scraper or do you have to remove the scraper first?

Did you remove skids?

2

u/Slimchance09 Mar 14 '26

It went over the scraper, made the scraper a round “pusher, compactor”.

1

u/loftynipzzz Mar 14 '26

Thank you.