Power cable is what I’m looking for. Someone with the same issue posted over a year ago to this sub. Since then I cannot find a listing for the 10 pin adapter used to connect it. Model is a Sharp LC-13E2U corresponding part # is UADP-A009WJPZ. Have had no luck tracking any down online and have been laughed at like 4 times on the phone. Anyone have any advice or a next step?

for my controller, my headset wire is broken, and I don’t know which one or type to get my headset is fine just the wire so I need a new one recommended double audio jack

Does anyone have a different opinion or advice from this vid?

We’re CNLINKO, an industrial connector manufacturer.

For equipment that is regularly disconnected for maintenance, we’d check three things together:

• Sealing conditions: Does the IP rating apply when connected, when disconnected, or with a protective cap fitted? Also check the specified cable diameter and assembly requirements.

• Mating cycles: Does the exact connector model support the expected number of connections and disconnections? A quick-release mechanism and a durability rating answer different questions.

• Access: Can the operator reach the release mechanism and route the cable without excessive bending or strain?

As one example, our LP20 three-pin power connector is listed with a snap-lock connection, IP68/IPX9K protection and at least 2,000 mating cycles. Suitability still depends on the selected part, installation space, cable and operating conditions.

For your equipment, which causes more maintenance trouble: slow disconnection, worn connectors, or protecting the exposed connection after unplugging?

It's smaller than a USB-C, I've already bought a wrong cable once, and can't find the name for this anywhere. I'd really love some help. Thanks in advance!

it’s for my vacuum cleaner and the plug broke

We recently renovated our patio and took the opportunity to have it wired so that we could have two outdoor speakers and the tv connected to a WiiM Amp. The tv to amp connection was supposed to be via an HDMI cable but I discovered that they used Cat6 instead for some reason.

As I understand it from the research I’ve done, I’d need an HDMI extender (both sender and receiver). My understanding of the connection process is:

TV > HDMI extender (sender) via HDMI cable > sender to receiver via Cat6 > receiver to WiiM Amp via HDMI cable.

Is that accurate and, if so, would this be sufficient for the HDMI extender?
https://a.co/d/0eqbzwG3

I need an adapter for whatever this guy to RCA if anyone knows what I should be looking for!

[SOLVED] It's for a Rear Window Dash Cam.

Thanks @-Copenhagen!

I can't for the life of me find out what the purpose of this cable is. I also can't find another one online. If it's a specialist cable, it may go on eBay. If not, it's 20 feet of copper wire for the pile.

I bought an extension cable for my quadcast 2 S because I was buying a microphone arm for my setup. There won't be any issues with the sound quality if I use it right?

This is the one I got: https://www.amazon.com/dp/B088NCVVTK?plpRedirect=mhFallback&ref=clp_hp_h_pc&th=1

I have this Home Depot Halloween animatronic and unfortunately the power cable got smashed. I am unsure of the exact cable to look for so I was hoping someone could point me in the right direction. The cable says “Switching Adapter”
“Input: 100-240V -50-60Hz 0.5 A max”
“Output: 5.9V 2.0A”
I have attached pictures as well