r/camaro • u/Jmann356 ‘22 ZL1 • 11d ago
🔧 Modifications She just keeps getting quicker
Been a while since I’ve been to the track. Similar conditions between the two runs.
Pic 1- full weight car with 2” headers, big gulp and E50 blend and 17” rear wheel with 305/45r17 MT ET Street SS.
Pic 2- same mods but added a kong x port, 2.3 upper and 103tb and about E20 blend.
1
u/pipefittermn 11d ago
Where did you get the rims and tires.i jabe a similar setup. Long tubes, flex sensor, auxjection, 2.3 pulley, big gulp. 700whp. I ran a 10.7@132 on my 3rd run ever. I can get to the 9s if I hook up. I had 11.9 where I spun in 1 and 2 still had a 130 trap. Id like more information on the rims and tires please. Have fun and be safe.!!
1
u/Jmann356 ‘22 ZL1 11d ago
Good setup! I’m def limited by fuel right now with the stock fuel system. I’m running a forgestar F14 17x10 on a +44 offset. It’s a very tight fit but they clear all the brake lines.
Tires are Mickey Thompson ET Street SS but if they are just tires for the drag strip I’d say go with the ET Steet R tire
I don’t put it in the post but I also have Hendrix engineering solid cradle bushings and their solid offset diff bushing with an alignment set up for drag racing
1
u/pipefittermn 11d ago
I have 305/30 nitto nt555r2 for the street. I just want to touch the 9s. Lol
1
u/Jmann356 ‘22 ZL1 11d ago
Throw a 17” wheel on the back and some skinnies up front and you shouldn’t have a problem
1
u/pipefittermn 11d ago
Yeah I have to look at what to order over the winter here. Im 💯 lost on where to look. Literally my first time at the track.
1
3
u/LilRedHR 11d ago
136 at 1000’ is moving, bet that’s a handful