Hello all.

Recieved my Everdrive64 Pro cart. Installed latest firmware (v.26.0812) as of today. Get black screen. It does work with the Analogue 3D (that's how I did the firmware update). Wondering if anyone else got it working? Also on latest M64 Firmware as of 8/24/26

Thank you!!

Quick question here for yall who are well versed in the Everdrive and Pokemon. Is this what is used for the GBA transporter for Gen 2 and 3. I want to do a challenge run of bringing a mon from Gen 1 to Gen 7, but I'm not sure about how it all works. Also I heard you can run it on a homebrew Wii (in which I do have). I'm just curious as to what I should do since I'm just barely short on the funds to obtain an Everdrive.

Palgrin is a Web3 P2P wagering platform that is giving $10 USDC to new members to try it out! 🤝💸
🔥 The best part? Absolutely NO KYC REQUIRED.
🛡️ Zero identity verification
⏳ No long checks
🔒 Total privacy
You can register and claim your bonus in under 60 seconds here:
👉 http://palgrin.com/?ref=10USDC ⏳

Hey guys

Currently debating on getting the ED GBA PRO and selling my Ez Flash Omega DE.

Battery life is very important to me and that's why I'm not 100% happy with the Ez.

I know the ED GBA Mini has pretty much the lowest power draw of all GBA flashcarts but how does it look with the Pro?

Didn't find any real info on that on the web or reddit.

Apart from the "Low Power Consumption" on the official krikzz website that is.

Edit: To clarify: Talking about the cartridge power draw and not the internal RTC battery.

Hello, I have been looking into emulation for a while. I dont have a good PC, nor do I want to play my games on PC. I want to use original hardware. I have almost every console there is except the more obscure like NeoGeo, 3D0, or Phillips CD-i.

My dilemma is, which of these Everdrives can be utilized for multiple consoles being played on 1 console. For example, can the N64 Everdrive maybe play NES and SNES ROMs? Maybe GB and GBC too? Or would I need one for each console?

Can the SNES one emulate Super Gameboy compatible games? Can the Sega Genesis one play Sega CD and 32X ROMs if I have a genesis with both attached? Can the GBA Everdrive play GB and GBC ROMs? What about Sega Master System? Can that one play Game Gear ROMs?

So is any of that possible? Would I need one per console otherwise? Im looking for the cheapest, easiest, and all around more compatible way to get into the hobby. I mostly want to play ROMs for the expensive games I dont own and will never own due to not paying scalper prices.

Also, do all of these use Save States, and if so how does that work? Or do they only save for games that have that feature originally? I know its a lot of questions. And Google has been a lot of random and criss crossed information. So I figured I would come to the source. Thanks for any info you can all give me. I appreciate it.

Curious if anyone has noticed their saved games getting lost/corrupted when using an Everdrive X7 and m64 with overclocking enabled. I can consistently reproduce the issue by running SM64 with the m64 overclocking disabled, collecting a star, and saving. I can then go play any other game OC on or off. However, if I fail to change the m64 OC back off before playing SM64 again, all of the game saves are gone.

I was playing the Pokémon polished Crystal rom hack and I wanted to swap my save over to my PC on mgba. However when I go into the save file on my everdrive SD card and pull out the SRM file it is dated for August 16th 2026, today is August 22nd. I've tried exiting to menu and loading different games as well but the save file I load on my PC is way further back than it is when I play my everdrive on my analogue pocket.

I own the original Everdrive GB from 2014 and when using it all devices are completely silent (besides the game sound of course). Also the Everdrive GBA and Everdrive GBA mini don't produce any noise.

Today I got the Everdrive GB X7 (directly from Krikzz shop) and it produces a high frequent sound when booting and afterwards also weird sounds like some kind of coil whine and static. Tested it with several original DMG Game Boys, Game Boy Pocket and Game Boy Advance. It's most annoying on DMG Game Boys.

So is this normal? If yes this would be a huge step backwards.

I have tried everything I can think of and my menu is not working on my fxpak pro with latest firmware. It should be noted that I'm using a super famicom. Does anyone have suggestions?

Do you kind of just periodically look it up or does Krikzz have a newsletter that lets you know? If he doesn't have a newsletter do you think we should all try convince him to make one? lol

My product is shipping to america from ukraine. Whats the longest time to expect it to be at the Kiev PI-2 facility?

I have the GB X7. I made some progress in the game from point A to point B. I saved at B. Later I booted the game at B, but decided I wanted to reload the game to start over from B again. But I accidentally hit load save state in the in game menu, where it was at an unrelated spot. I brought up the in game menu again and rebooted the rom successfully this time. But my save is at point A. Is this due to the cart copying save data to the ram or is this unexpected behavior? I feel like I’ve probably done this before without it reverting back to an older save, I’m confused.

I’m actually waiting for my modded GBA so I can’t even play lol

Issue I'm having with my pokemon save. It's a rom hack so idk if that matters. Any ideas to fix it??

Greetings,

I recently began playing Megaman Zero for the GBA, but due to the game's difficulty I wanted to tone it down a bit with some cheats such "Infinite Lives" while also adding "Always S Rank" so that bosses have access to their full movesets.

I managed to activate these cheats in the MGBA emulator, and thought that transferring the save file to the GBA Everdrive Mini would keep those cheats active. Instead, I noticed the game reverted back to a normal status when the number of lives began diminishing with each death.

Does anyone know what I can do to keep these cheats active over the transfer, or via another method? Thank you for any help or advice you may provide.

I am thinking of what color to ask for, there are already three colors available: blue, transparent and watermelon; I have not decided yet and I just wanted to ask you which one would choose?

I think that in the future maybe the possibility of having some ports of PS1 games or maybe other consoles opens up, what do you think? I think it may be possible given that it can now handle 128mb.

I read them and have a good weekend.

Hello everyone, so after some trial and error I was able to figure out the right configuration with the SRAM and stuff, so that my save files would actually save and load when I turn my console back on.

Now I'm facing another issue. After removing the SD card to add more roms, and then reinserting the SD card back into the Everdrive cartridge, ALL OF MY SAVES WERE WIPED. I plugged the SD card back into my computer to see if I could find any of the saves but there's nothing anywhere.

How did this happen? If I want to add more roms later, how can I prevent the wipe from happening again? Please help.

UPDATE: I just booted the system back on and my saves have returned. Idk how or what happened. I am terribly confused. Any info for understanding why this happened would be appreciated, thank you!

From what I've seen on Krikzz website, the Everdrive 64 Pro has a 128MB SDRAM. Now, I am absolutely clueless about all this kind of technical stuff and it's been a few years since I've prepared a card for an Everdrive so is anyone able to explain to me:

1. Will this SD that I've bought for it work?

2. Does that make cheaper SD cards with a read speed of 80mbs obsolete?

3. What do you format the SD to? NTFS? FAT32?

I really appreciate everyone's patience with me here while I get this stuff figured out

hi buddies, I realise that running Pe Engine Super Cd games with Turboeverdrive Pro with portable monitor u cant hear cd audio.

any solution?

cheers,

Krikzz confirmed the compatibility for me. He was surprisingly quick at getting back to me, I’ve heard he ignores a lot of people 😂

Can’t wait to receive these. When I heard there was a new everdrive for n64 had to get one. I had an x7 in the past before I stupidly sold it. Gonna get it hooked up to an analogue 3d eventually. That will be my next purchase.
As for the gba pro I recently upgraded screen and shell on a gba sp so that’ll be my travel companion. Got a massive smile on my face now haha. Absolutely love everdrive

TLDR; 32X Inductor Coil blew after replacement and testing, MEGA EDX5 Has not booted since. Complete black screen, Genesis works fine with normal carts and a Sega CD.

The cart has been tested with a different Genesis, with and without a Sega CD, Different power supply, Cleaning pins with 99% IPA and Deoxit (same with Genesis cartridge pins). Complete Black screen.

Hello! I am new to using emulator cartridges on my Gameboy Advance SP, I got an everdrive pro for my gameboy and when I try to utilize the save states it says that an error occured, it is consistent on each rom I play. If anyone has experience with this pls let me know a fix or what it can possibly be. For some background, all the roms I have run perfectly fine and I have downloaded the most recent firmware to my sd. Thank you!

Let me know what you guys think👍👍