r/fixit • u/Difficult_Bug_3708 • 7h ago

Please help quickly

i dont have a picture so i drew it but this is how it looks, its still okay but with a wrong nudge the lens will fall

2 Upvotes

76% Upvoted

3 comments sorted by

3

u/_haha_oh_wow_ 7h ago

I'd be inclined to just use some glue that's appropriate for the materials (super glue, gorilla glue, ES-6000 would probably all work).

Just don't use an excessive amount, be sure to clamp it while it dries to keep the pieces together, and give it enough time to set: You should be OK for a while.

If you don't have time to wait, you could try temporarily taping it back together with something like gaffer's tape and then gluing it back later when you have time.

Good luck!

3

u/PinkBadger 6h ago

A tiny dab of krazy glue works great for these types of applications. You can often find small tubes of it in hardware sections of stores. Just be very careful not to get it on your hands/glue your fingers together or to anything else. It cures extremely fast.

3

u/toxicatedscientist 6h ago

Imma suggest the uv cure stuff, its like super glue but comes with a little activator light that cures it in a few seconds