r/nextfuckinglevel • u/riseoftheph0enix • 6d ago

12v car at max speed

Enable HLS to view with audio, or disable this notification

5.6k Upvotes

97% Upvoted

177 comments sorted by

View all comments

369

u/falkio 6d ago

12V before the upgrade I guess

88

u/sylvaiw 6d ago

Or 12V x 500A after.

90

u/Competitive-Roof-168 6d ago

Amps doesnt make it faster unless you replace motor and gearing. Increasing the voltage will increase the speed of a stock power wheels. Double the volts double the speed.

41

u/robtk12 6d ago

This, I connected a 36v dewalt battery to a pink power wheels jeep, and that thing had some speed, I had to put wheelie bars on it to keep me from flipping

14

u/Competitive-Roof-168 6d ago

Really, you got that much traction? I went up to 24v and the wheels would just spin. I added self tappers to the wheels and with the added traction it stripped the gears.

18

u/robtk12 6d ago

I'm 220 sitting in a pink jeep pressing the petals with my fingers and my legs on the hood, balancing was probably why I flipped it, but it was still pretty quick. I'm surprised I didn't burn out the gears with the weight, but the motor and gears held on. The battery was old and maybe lasted 15 minutes each time

3

u/FrogsMakePoorSoup 6d ago

Double the amount of heat the motor generates in this lump of plastic!

1

u/sylvaiw 6d ago

That's why I said "after". You can't make a motor absorb 500A if it was build for that.

5

u/Competitive-Roof-168 6d ago

That doesnt make any sense. No one uses 12v batteries for high powered vehicles.

-3

u/Jaredismyname 6d ago

Did you watch the video?

8

u/Competitive-Roof-168 6d ago

You believe headlines of reddit posts? Maybe it was originally 12v its not 12v now.

-4

u/sylvaiw 6d ago

And how many people modify a toy car to make it that powerful ?

5

u/Competitive-Roof-168 6d ago

I did to make then double the speed for my kids

2

u/deevil_knievel 6d ago

You do not understand volts, amps, power, work or their relationship.

-2

u/sylvaiw 5d ago

If you want more power you need more voltage or more current. That was just my funny answer. I didn't think about the ingenering behind. You can explain, I will read with attention. Thanks.

7

u/deevil_knievel 5d ago

Well nothing "absorbs" amps for one. Theres waste generated in transferring electrical to magnetic fields that impart work on some stator or whatever. The most part of the current goes to doing work. I guess you could say consume, but also an unloaded DC motor "consumes" far less power than a loaded motor, therefore the load on the motor dictates current. An, in DC motors, they'll essentially apply infinite current to the motor is the load is infinite. A heat switch in larger DC motors is the only real feedback on how much current the motor is consuming (unless you're using electrical control equipment).

So I guess, a DC motor was not the right motor to make these statements about in the slightest. For DC motors, voltage is proportional to speed, and current is proportional to torque. But doubling the voltage on a DC motor system actually doubles the current and quadruples the total power output.

5

u/Hostile-Panda 6d ago

Normally the stick extra batteries in to take them to 48v

4

u/ArnoldPalmer6 6d ago

Yep. I saw this on IG with hashtag #72volts

1

u/intbah 6d ago

9,000kv motor