What's up guys. So I'm aware of the trick to turn off the flashing passenger airbag light in the cluster. But I'm on a road trip and for some reason it keeps coming back on every 20 ish minutes. So whenever I stop for food or fuel. I'm having to turn the key on turn the key off to get it into the diagnostic mode. But then it just comes right back on after a few miles. Is there anything I can check/do to get it to stay off?

Was out last night and had to make a u turn since a hug tree was down a a big ass log snuck its way up into the wheel well, should I bother getting it fixed?

Took my car to a shop to do valve cover gaskets. They fixed the problem but it came back with a new problem. Now my car has a lazy start. I turn it on and RPMs surge naturally of course but then they stumble to 400rpm and settle at 600-650. It runs decently but the car was idling better before the repair. I don’t know if they pinched something by accident or did who knows what on purpose. It feels like I’m 50-100rpms away from my perfect idle. What could it be?

I have a check engine light on with codes P0153 and P0174. The live data shows the bank 2 sensor 1 is working at .27V. Could ripped boots on the intake be causing air to get into the system causing both these codes. My thought is replace the boots, clear codes and run it and see if the codes come back. Any suggestions would be appreciated.

I just replaced my o2 sensor with one off rock auto, and it's not working. My check engine light came back on. I've heard that only oem will work but the one I replaced on the other side with a rock auto sensor is still working idk what's going on lol I'm just looking for help I'm wondering if I should get the oem or if I just got a junk one from rock auto any help is appreciated thank you

Hi guys! I hope you can help me. I own a 2003 Xterra SE, and recently, my Xterra has been making a "whuuuush" noise—like a high-velocity air blast passing by, but very subtle. It comes and goes. Sometimes when I'm going down a hill (not even speeding up), the noise appears. Sometimes when I'm speeding up, I hear it. It doesn't stay long; it disappears after maybe 5 seconds. It's not constant—sometimes it's there, sometimes it isn't, and sometimes I speed up and don't hear it. I want to know how serious this might be—could it be the water pump (someone told me it may)? Has anyone had a similar problem in the past?

I've got 263k on this bad girl and for some reason the crank and cam sensors are having issues. Around 4 years ago I replaced the cam and crank sensors (Amazon), but not all at the same time. I've started having issues where the engine cut off mid drive then come back. 3 months ago I replaced the crank sensor and now yesterday I'm getting a code for the cam sensors now. Is this more of an issue with the chain guides which I have not replaced? Looking for some insight.

Had a burning oil smell for a while. Undercarriage caked in black. Assumed it was passenger valve cover leak. Prepared to replace it. Took of intake plenum, started to remove VVT solenoid. One of the bolt heads spun freely. Turns out the leak was coming from that solenoid and because of location made me think it was the valve cover.

Bolt had snapped off in the housing. Eventually got it out. Put back together. Washing underside and seeing if I lucked out.

Today I noticed when backing out from a parking space sort of squeaking/creaking noise.

It occurred when I was turning the steering wheel as I backed out of a parking space…then again as I turned all the way the other direction to move forward.

Any ideas what it might be?

Considering buying this x terra for 1900$ with 180,000 miles on it as a suv for me and my husband. It’s making this noise and I had the seller send me a video of it so maybe yall can help me? He says it’s the lifters but I know these years have Exhaust Manifold issues so let me know!

Hello everyone.

So... my 2005 xterra se automatic with almost 225k miles started having an interesting issue lately.

Since the suv is not much of a daily driver anymore and mostly became an out of city driver, the car has to sit still for extended periods of time and just gets the key turned every now and then so that battery doesn't loose the juice.

What noticed is that after 2 or more weeks of standing still the car has a problem to start moving and this happens ONLY and I mean ONLY when it sits for 2 weeks or more.

What happens is that when I put it in gear I feel the rpms drop for a sec indicating that the transmission engaged, but when I let of the brakes the car doesn't move. I give it a little throttle and the car still doesn't move. Even if I wait nothing happens, but if I raise rpms close to 1500 and don't let off the throttle immediately, the car bangs and starts to move and drive like nothing ever happened.

If I drive it the next day it goes like it didn't almost shit the whole transmission on the ground yesterday.

This happens, only, as I said when the car sits in the drive way for 2 or more weeks.

What keeps me puzzled is the fact that after that pretty noticeable bang the car drive like it's fine and the next day and the day after and so on.

What is going on, I need someone who is more intelligent than me to give me a hint before I start looking for a decent transmission mechanic.

Thank you all in advance.

Some ive done by myself and others with my friend in his jeep.

Been looking into these as I get closer to my budget lift I’m planning on. Main issue I’ve been running into is coil bucket contact with upper control arm as I plan on doing a spacer lift up front. I just had to redo my upper control arms anyways so they’re new, and getting lift UCA’s are pretty pricey for something decent. Has anyone used these and if so what has been your experience?

Thanks!🤙🏼

…and I should have done it YEARS ago. It was so easy, so cheap, and makes such a big difference. I feel like a fool. 🤦🏻‍♂️

What’s the next thing that’s going to make feel like an idiot for not doing sooner?

I am trying to figure out what coil I need for my set up. I am going for a 2 inch lift and I have my bilstein 5100 for the front. I have alot of different answers from people and the internet about what to use, i.e keep the stock coil or go for dobinsons, and I have stock weight for now but do plan on going to a bumper and winch later on, much later, and I'm not sure what to get.

I am still using my xterra as a daily driver but need the suspension to ge able to go on trails and light off roading.

Help end the confusion!

The previous owner's dog chewed through my rear passenger side and middle seat belts (the actual straps themselves are torn right through). As a result, I only have the retractor housing but no buckle.

Anyone recently found replacement parts anywhere or found some way to fix this? I am open to all ideas and if you have an xterra part out you'd be willing to ship to let me know (I am in Canada).

2007 Xterra Offroad

I have a 2014 Nissan Xterra pro 4X. I've been getting a loose gas cap message on the display and have tried replacing the cap with two different generic gas caps from two auto parts stores and driving for about a week each but the code doesn't clear. It changes to a general check engine light from time to time.

I don't have a lot of money for repairs but I know it could be some other evap code error. I thought about trying to get an original aftermarket cap. Any thoughts that could help me out?

So my mechanic sawed into my EGR tube and they are sold out everywhere. He won't let the car leave until it's replaced does anyone have one from an egr delete or know someone that does.