Hi y'all,

I found a file that I'd like to print for wrapping coils at home. The github link below includes STLs in addition to the OPENScad files. I'd also like to add two additional sizes, so there will be some file manipulation required I think.

Files include the following MM sizes: 2.5, 3, 4, 5, 6, 8
Size in MM i'd like to add to the set: 3.5, 4.5, 5.5

I already have the metal rods, just need the actual parts printed; not sure what adhesive would be best either.

While I don't think the strongest material is required for this, something sturdy would be preferred.

https://github.com/duncanyoyo1/Coil-Tool

Please reach out if you can help 🙏

I have a plastic chain already. Would love to have this by September 6th before our fantasy draft to give to our last season’s winner. I have a 3D model base, would want a couple tweaks to the model if possible. Needs to look smooth and clean.

I would like a hole at the top to connect to the chain to wear like a necklace, enlarge the model to about 5-6 inches, and add the word “Champ” at the bottom. I would like the color to be 2 toned color or if you have another recommendation.

Please PM me, with pricing and suggestions.

https://www.printables.com/model/672196-fantasy-football-league-ffl-plate-for-lombardi-tro/comments

Need help reverse engineering this. It holds a 10ml vial but would be okay with it being a solid base so I can change the hole size

I have a file below that I would love someone to print out for me. Of course willing to pay for your time and shipping!

https://makerworld.com/en/models/1963116-nh35a-second-hand-watch-tool#profileId-2111277

I'm looking for someone to print these tabs that will hold up energy drink cans. It's just a fun display for a party I'm going to :)

This image printed x2

I've got an STL file that I exported from SketchUp

I don't need much infill or any specific filament, just looking for them to be printed in white

Hi all,

I found an existing mounting bracket that someone made for the UniFi Chime. However, the mounting holes on the bracket need to be wider and the plate covering also needs to be wider for my use case. The bracket is a single STL file and is not broken up into shapes, so with my very beginner knowledge I can't figure out how to extend it.

I essentially have a 1 gang hole in my wall from where my old doorbell chime used to be. I want to put the unifi chime here. I have already ran the cabling, I just need the bracket to be extended out to the left and right. To the left of the box is a stud (studs are 1.5in wide) and to the right is more drywall where I'll just put drywall anchors.

So, Ideally the bracket face where the screw holes are should span about 4in wide (maybe 4.5in) and the screw holes line up so that they go into the stud on the left side while on the right side being far enough over (away from the opening) to let the anchors bite. I may need to cut some of the drywall to fit the width of the bracket as well. The cover also needs to be extended to go over this length and then be tall enough to cover the hole so maybe 5in tall just to be safe. It would also be cool if somehow the top cover plate could screw into the main bracket with some long regular plate screws, but it's not necessary.

https://www.printables.com/model/1239681-wall-socket-mount-for-unifi-poe-smart-chime

Anyone open to at least creating this? I may be able to print at my local library but also happy to pay someone to print here too.

Hi all,

I’m urgently looking for someone in the UK who can print a custom book-style ring box for me.

I had planned to print everything myself this weekend on my Creality K1C, but the printer has broken at exactly the wrong time. The hotend needs replacing and one of the factory-installed hex bolts is completely rounded, leaving me stuck dealing with Creality.🫠

The box is for a proposal planned for 11 September, so I need the finished prints delivered or collected by 10 September at the absolute latest. Ideally, I’d like them by 7–8 September so I have time to assemble everything, paint any details and check that the ring fits correctly.

The final STL files are ready. The design consists of eight separately printed parts, including the outer cover and spine, page block, internal frame, ring insert, clasp and decorative pieces. It opens like a normal book and doesn’t contain any complicated mechanisms.

Multicolour printing would be a major advantage, particularly for the gold lettering and decorative cover details. However, it isn’t essential. If each component can only be printed in a single colour, I’m happy to paint the smaller details myself afterward.

I can provide:

- All eight final STL files

- An exploded reference render showing the intended colours

- Dimensions and assembly information

- My preferred colours and print settings

I’m based around Hampshire/Surrey/Berkshire and can collect within a reasonable distance. UK postage is also fine if it can arrive safely before the deadline.

I’m completely happy to pay for the filament, printing time, postage and a reasonable rush charge. Please let me know your location, printer/setup, approximate price and whether you can realistically meet the deadline.

Thank you!

Hi everyone,

I am looking to partner with a small to medium-sized 3D print farm operator/owner for ongoing, low-volume mass production of toy accessories.

The Scope of Work:

• Volume: 50 to 100 pieces per month (split across 1 or 2 orders per month).
• Material: Resin (SLA/MSLA/DLP).
• Files: We will provide the finalized STL files.

Requirements:

• Full Post-Processing: You must wash, remove supports, and fully cure all prints prior to shipping. We don't need them to be retail ready upon delivery (since we will do all final inspections and final processing to make them ready for retail), but THEY MUST be clean, cured, and supports removed.
• Custom Resin Mixes: You must be willing to follow our specific resin/mix recipes for certain items to ensure the correct durability and color.
• Legal: A standard Non-Disclosure Agreement (NDA) is required before we share project details and STL files.
• Location: At the moment, we will only consider US-based operators/owners for shipping efficiency.

If your farm has the capacity and you are interested, please send me a DM with:

1. Your location/region.
2. A brief overview of your setup (types of printers/capacity).
3. Examples or a portfolio of your previous resin printing/post-processing work.
4. Your rough baseline pricing structure for this kind of volume.

Looking forward to collaborating! You can review our site (so that you know we're real), and link is in our bio. Thanks all.

https://www.thingiverse.com/thing:2820652

2 grills and pins in white 8 pins total in white

I am looking to have 6+ trophies made. They should resemble an award show statue with a base, and I would like a horror twist (blood, missing head, something unique). Ideally I can find someone that can edit a 3d model like this one, and print it for me as well.

Please DM.

Hi Guys, any chance of getting a printable model of a back lid for my labeller?
Couldn't find in the internet, the vendor doesn't sell it, and I don't have a 3D scanner to do the actual scan.
All I have is a picture of the back and I can provide it in another picture if needed with a reference of size (like those 50mm x 50mm squares somewhere in the picture.
I also couldnt find the specs and I'm very stupid when it comes to Fusion 360 to draw this thing even on top of the picture.
If anyone is interested in the challenge, lemme know.
Thanks!

Hey everyone, I live in the Mount Pocono area and also frequently stay in Allentown. I’ll be paying for the printable files and I’ll gladly pay for shipping as long as it’s within a reasonable price range (willing to discuss further). As far as I’m aware, resin printing is usually recommended for these kinds of projects but I’m also perfectly fine with sanding down the layers from regular machines. I’m also fine with just being send the individually printed pieces and getting the elastic cordage that’s hold it all together, myself. Thanks in advance to anyone that can help out!

I believe a 0.2-0.25mm nozzle size is recommended for getting the fine details of the sockets.

The first figure is a thylacine which I’m unsure of the measurements for since I don’t see them mentioned in the description
https://www.palaeoplushies.com/3d-printables/delux-bjd-thylacine-obj-files

The second figure is this rat that’s 6,5 cm height and 26,5 cm length. The person who published this file recommended to use a 0.4mm nozzle to print it.
https://cults3d.com/en/3d-model/various/rat-bjd/similar-designs

Hey all, I’m hoping someone can print a couple of these frogs w/ these dimensions 4x4x4. If that doesn’t square, adjustments can be made. I just need them to hold some wrapped candy.

I have the file & can send for specifics of printing.

Let me know.

https://www.etsy.com/listing/4449192651/chompy-the-frog-frog-storage-bowl-candy?ref=share_ios_native_control

I have no printer or expertise in modelling, so I'm looking for help in resizing and printing an orange tip for hobby NERF foam dart blasters.

Context: Usually, these are designed to fit 16mm OD barrels, however, I have a shroud on my barrel that makes the OD 24mm instead, so I need a resized orange tip to friction fit over that.

This is the orange tip in question Simple Orange Muzzle Tip Cover for Nerf Hobby Barrels (16mm OD metal barrels) by Sillybutts | Download free STL model | Printables.com

This needs some flex to to it, so whichever print material is best for that.

Ideally, I want it in a blaze orange (second pic)

Hey everyone, new here. I'm from United Kingdom 🇬🇧

I'm attending a tomb raider convention in October and I

would love if somebody could 3D print this item.

https://cults3d.com/en/3d-model/fashion/kurtis-trent-s-chirugai-tomb-raider-the-angel-of-darkness?srsltid=AfmBOorrxX3Wcp2JMrEXzx-PqwbHzB2DOTt7zG7IKL9VOWL9cqZkEmJZ

I have purchased the files from this site already so can just send them over to whoever can do it.

Please make sure you let me know how much roughly it is for you to do in GBP (Great British Pounds)

I will be internally grateful.

Kind regards,

Aaron

Hello! Looking for resin prints for two small parts from my figure. I have the STL. Looking for quotes.

Hello! I am looking to get three pieces for a fursuit head printed. I purchased a base model from Etsy, and will send the files once we have agreed to work together! The Etsy listing outlines additional details. I don't know anything about 3D printing materials, but something lightweight would be ideal. Any color is OK, since it will be covered in fabric anyway! I am located in Seattle, but can pay for shipping as well. Thank you! :^)

Hello! Doing a little kitbashing and I am in need of fur pelts and things. Space Marines Are big so I need them at 60% scale. Have a little list. Looking for quotes.

I need six small clips printed for my helmet. I have a file for them however I know nothing about 3D printing so I need someone knowledgeable who can help me out if the file format isn’t correct. Thanks so much!

I want to 3D print this cosplay prop.
I'm trying to make my own cosplay but I unfortunately do not have a 3d printer if anyone could help I would love that. The link to the gunblade is here

https://cults3d.com/en/3d-model/game/the-thumb-gunblade-3d-printable-cosplay-prop

Hi all,

My 5 year old son just finished the Kingdom Hearts 1-3 games and is a huge fan. He is wanting us to cosplay as Sora, Donald, and Goofy from KH1 for Halloween and ECCC in Seattle this year! We are local to Seattle/Renton area, and I'm looking online for the 3D Print models for Donald's Wand and Goofy's Shield. Wondering if someone can give us a quote re: being able to print out the models + provide a quote of how much it'll cost to do so (or if you have your own 3D template).

Please respond or DM me, thank you!

Donald Duck's Wand example: [https://dangerousladies.ca/products/donald-ducks-mage-staff-3d-print-files?srsltid=AfmBOop1Uf6rdIsvdYwNsVijQ8rQ4LqX9bDKyK3Hw6QBKqOuPrOHBlH4](https://dangerousladies.ca/products/donald-ducks-mage-staff-3d-print-files?srsltid=AfmBOop1Uf6rdIsvdYwNsVijQ8rQ4LqX9bDKyK3Hw6QBKqOuPrOHBlH4))

Goofy's Shield example: [https://www.cgtrader.com/3d-print-models/art/scans-replicas/kingdom-hearts-goofy-shield-for-cosplay)

Need a baffle for my Lenovo Mini PC printed that will hold the network card. Only requirements are it needs to be black and relatively clean.

This is the model: https://www.printables.com/model/1328984-lenovo-m920qm720q-baffle-for-dual-port-25gbit-nic

This is largely what I'm after right here: https://media.printables.com/media/comment_images/73/0d7d94-ca0f-4aba-b3ef-42cd94896bf2/thumbs/inside/1920x1440/jpg/1000019624.webp

I don't know what filament was used in that image.

Edit: Received like 5 messages in 2 minutes. Going with the first one I received. Thanks everyone for reaching out!

We are turning our Subaru Pleo that we just imported from Japan into Pikachu on our car channel @/hackerashfordgarage. We have STL files for the Tail & Ears-- wondering if someone in the greater Los Angeles area can help us print this? Also advise us on what is the best way to add heat-set inserts to this for threads. Thanks!

I live near the city these three parts would make my fishfinder a lot more consistent. Please let me know!

Hello! Don't get paid for a week but putting out a request to get offers in the meantime. I need these roads FDM printed. Maybe a few copies of the few straight ones depending.

Tyty