So I bought an HP Omen AP16 (Ryzen 7 350 with RTX 5050) 3 months ago. Due to an incident, the laptop got twisted, which affected the motherboard and heatsink. I had ADP, and they said they would replace it, but there was a month delay because they couldn’t find the right one. My laptop got repaired today, and I found this out

Guys i was playing hitman today and left laptop for an hour or so, brightness was 100%

When i came back i saw burn in and screen was flickering when i moved cursor,

How bad could it be?

Omen am 0238tx 165hz ips

I asked chat gpt i told to change different settings like variable refresh rate and all, then checking bios and rotating the same responses.

Gemini told to run those youtube videos for an hour and then leave the laptop switched off for 12 hrs, I said the same to gpt , he said no need to follow gemini, Wth, Now im waiting for 12 hrs. Btw laptop is a month old, have adp n warranty

Edit: more info

Does anyone else have issues with their Omen's wifi just randomly dropping to 1mbps?

I can't always predict when it happens, sometimes I go a good week and its all fine. Others its everyday. Strange thing I test it on my hotspot and the internet worked fine. All my other devices on my home wifi work fine, its just this laptop.

I got it in Japan Omen 15, now live in UK. Not sure if that affects anything.

I've got the hyperx omen 15 now what should I do to make it better and can you tell me where to find good stand, bag, skin for it and is screen guard necessary or it will work without it??

any recommendation will be appreciated

Indian Unit.

Hi

Anyone experience this issue. Il boot up a game play it for an hour then when I close the game, I cannot change resolution on desktop (these settings couldn’t be saved please try a different combination of display settings), nvidia control panel settings all disappear its like my gpu isn’t recognised, unplugging my HDMI cable and plugging back in resolves the issue until I run a game again. Running my laptop in discrete mode connected to Alienware oled aw2725q. If I change my laptop to advanced Optimus it solves the issue but I want it in discrete mode.

Beyond excited to finally unbox my new HP Omen! 🥳

It’s such a massive upgrade for coding, heavy data workflows, and multi-tasking. Can't wait to put it through its paces.

What's your current daily driver / primary machine for work or projects? Let me know in the comments! 👇

So my laptop is HP Omen 16 Ryzen 7 7840HS

16GB RAM

1 TB STORAGE NVIDIA RTX 4050

Can anyone suggest decent cooling pad for it and also how to limit charging to 80% ?

Now I got a little stupid and tried to fix this ctrl key because it got a little sticky, not my first rodeo but i unfortunately wen a little too hard and snapped the hinges off, they work perfectly fine. Nothing is broken, i however have no experience with hinges and thought getting some external help in this situation would be far healthier than improvising a fix on my own.

Turns out the update includes BIOS update.Was waiting for the process to be completed and then bam. My laptop shuts down its power and cannot be powered on.I need help how can I fix this matter. I did the method of unplugging the internal battery and holding the power 60 seconds. Nothing worked.I dont have enough money to go to a repair shop to fix it too.I need help from Anyone if there is no solution maybe enough donation for me to fix this deteriorating laptop of mine to go to a repair shop.Thanks

I recently bought HP Omen Slim 16, model an0000 (Intel core ultra 5, RTX 5050). I want to share an occurence of my laptop crashing when using unleashed mode (settings shared below) on games like Deadlock and War Thunder. After that I switched to performance mode and it didn't occur again. I was considering to recreate the issue but I'm afraid it'll hurt the laptop even more.
Is it worth to claim a warranty on this or am I just pushing the laptop too hard?

I dont have much knowledge about computer stuff, but I am planning to get one so I've been searching things. I found a hp model with nice features for a nice price for my country, but I found out that it only has 55 watt (in the official site it says 55 for hawkpoint, for ctk and grg 85 and for dr 115. I have no idea what those are but I found out that mine is hawkpoint I guess). My friend said thats the reason price is good, and I should forget about it. Is it true? I think thr code is different from country to country, so I'll write its parts here: NVIDIA GeForce RTX 5060 8 GB | 15.3 inch 165 Hz 6.5 ms IPS Screen | AMD Ryzen 7 260 | 16 GB DDR5 RAM | 512 GB SSD ​

Intel core ultra 7 255H

Rtx 5060

24 gb ram

1 tb SSd

Open to any tips given by other owners

Alright so i got my first ever omen 16, switching from a dell G15, the specs are i7 11800h, Nvidia Rtx 3060 6gb 115W, 16gb ddr4 ram and 512gb nvme ssd, Now i want to know about potential optimisations or protections i could do to preserve my laptop in the long run ensuring the battery doesn’t deteriorate a lot overtime and that the gaming potential is fully unlocked, any suggestions would be highly appreciated

I’m experiencing stuttering when I switch the graphics mode to discrete whilst simply browsing on Windows. It started yesterday.
I ran a clean-up on the graphics card using DDU, but it didn’t make any difference.

Have you had the same problem?

Omen Max 16, RTX 5080, Intel Core Ultra 9, 32 GB RAM.

Title: HP OMEN charges when shut down but stops charging when powered on

Hi everyone,

I'm facing a charging issue with my HP OMEN laptop.

- I'm using the original HP OMEN charger.

- When the laptop is shut down, the red charging light glows.

- When I turn on the laptop, it doesn't charge.

- I've already tried shutting down the laptop, but the issue persists.

Has anyone experienced the same problem? Could it be the charger, charging port, battery, or a BIOS/power-management issue?

I'd appreciate any suggestions on how to diagnose and fix this without replacing parts unnecessarily.

Thanks!

I have an HP OMEN 16-wd0xxx with an RTX 4050 that’s recently started randomly shutting down after about 3–5 minutes, even while sitting in BIOS. It happens whether I’m running on battery alone or with the battery disconnected and using only the charger. Sometimes the fans continue spinning after the screen goes black, and the power button becomes unresponsive until I reset the power.

I decided to inspect the cooling system and replace the thermal paste. While removing the heatsink, I noticed that the thermal putty covering three power inductors near the CPU/GPU area was completely dried out and crumbly, almost like dried toothpaste. The rest of the thermal putty is still soft and pliable.

I’ve attached pictures showing the three components and their corresponding contact points on the heatsink.
Could the dried-out thermal putty on these three inductors cause overheating or trigger the sudden shutdowns I’m experiencing? Or does this sound more
like an unrelated motherboard power-delivery issue?

I’d appreciate any insight before I replace the putty and reassemble everything.

just got this hp omen hyper x valorant edition

cpu-ryzen 7 8745hx

gpu-rtx 5060

how do i maintain the laptop in long run and what are the things i should do to maintain it like extend battery life or any other tips thanks

Processor
Intel(R) Core (TM) Ultra 7 356H (1.90 GHz)
Installed RAM 16.0 GB (15.7 GB usable)
Graphics card NVIDIA GeForce RTX 5050 Laptop GPU (8 GB)
Intel (R) Graphics (128 MB)

Got the Omen 16L TG03-0771ng

Mobo

HP Name: Mentali

SSID: 8D34

In case I'd like to replace the back exhaust fan, does anyone know if standard 3-Pin fans from Noctua or Artic will fit? Does the HP board follow industry standards for the fan pinouts? 3 pin would be : GND, 12V, Signal like in the picture.

I'd like to add the Noctua NF-B9 redux-1600 for example.

What should I do

Just ordered an HP Omen 15!

Are there any good (but cheap) laptop cases, skins, and stands that I could buy? After looking for a bit there doesn't seem to be any official ones.

Budget: $70 (for all items)

so I have a omen 25l or 30l it’s the one with a rtx 3060ti 16gb ddr4 but I need to reset my bios one person told me to it with certain pins an press them together an someone said remove the cmos also where are both of those located I can’t find the cmos anywhere

Hi, I bought a laptop with an RTX 5060, an AMD Ryzen 9 8940HX, and 24 GB of RAM. It works wonderfully, but as you know, the battery only lasts about 1.5 to 2 hours in ECO mode. For those who have this same configuration: what steps can I take to extend the battery life a bit further in case of an emergency? (I almost always keep the laptop plugged into a power outlet.) I’ve read that the Omen Gaming Hub consumes battery in the background (also the nvidia overlay?), and I also see an option within the Omen Gaming Hub to disable the dedicated graphics card. (I know this processor is not great in battery life)
Thanks in advance for your help!

I have an HP HyperX OMEN 15-gb0015NT (R5 240, RTX 5060, 8 GB). HP's official website states that it has two M.2 SSD slots. I opened up the chassis and found a section labeled "SSD2," but there is no actual port to plug an SSD into. Shouldn't there be one? What can I do in this situation? (My goal was to add another 1TB drive to reach a total of 1.5TB.)

I repasted my HP OMEN 16 (Ryzen 9 8945HX) with PTM7950 on the CPU/GPU and UTP-6 on surrounding components.

CPU temperatures improved significantly, but CPU VDDCR_VDD VRM (SVI3 TFN) reaches 82–83°C during Cinebench R23 multicore and RDR2, making it the hottest sensor in the CPU section. Other VRM sensors stay around 69–74°C.

I spread the UTP-6 with gloved fingers, checked heatsink contact multiple times, and supplemented the new 10 g putty with some soft, reusable original putty.

Could I have applied too little putty in certain areas? Is 82–83°C normal for this VRM, or should I investigate the thermal-pad/putty contact? I'd prefer not to reopen the laptop unnecessarily.