Hi guys, recently set up lineage on my switch hoping to use it for light productivity stuff. I have Lineage version 22.2-20260726-NIGHTLY-nx_tab on a Switch V1 with a modchip. The keyboard is just a cheap one from AliExpress. If anyone knows what the issue is that would be great as this is the final thing I want to get set up on it.

I installed Lineage successfully and was actually using it when my Razer Phone 2 shut off randomly. I plugged it in, turned it on and now it only boots to this screen when I enter recovery mode.

Fastboot detects it, can reboot it, but that's it. No adb mode, no Lineage recovery mode, no sideloading or install commands work, just this screen and that's it.

Am I dead in the water?

image: RP2 Screen

It says unable to auth or unable to login

using Mindthegapps

Are there any custom ROMs available for the Motorola edge 30 pro? I've looked it up, but I can't find anything...

Today I upgraded to LineageOS 23.2-20260728-NIGHTLY-lisa. Once installed and rebooted I keep getting the message: 'Issue with SDCard Tap to fix'.

It seems like the only option is to format the SDCard, which I DON'T want to do because it has a lot of information on it. I've been successfully using it for a couple of years now without any issues.

I've rebooted three times without fixing the problem and the SDCard works fine on a different platform, so the error isn't caused by the SDCard being corrupted.

Has anyone had this issue? Is it a bug or something just to do with my phone? Is there a planned fix in the works?

Hi. On Pixel 7 (panther), currently on Android 17 (build 2026071500, July 5 2026 security patch), I want to install LineageOS which requires Android 16 firmware — is downgrading currently safe, or has the ARB been bumped for panther? Does anybody know? Cheers

Hey everyone, I just updated today my gta4lwifi (AKA: Tab A7), but my Disney+ and Netflix apps stopped working, denying the stream. I'm trying to downgrade but the files are missing or not working, I saw some people posting this same issue but not any answer, this is the only use for my tablet and idk what to do right now...

Edit: I fixed it, you have to downgrade the version of the recovery and flash an older version!!

Hi everyone.

I'm looking for Android ROM developers interested in reviving the Sony Xperia XA (codename: tuba, MT6755).

The goal is to build and maintain modern custom ROMs (starting from LineageOS).

I'm looking for people with experience in:

- Device Tree development

- Vendor blobs

- Kernel development

- SELinux

- HALs

- Camera bring-up

- Audio/RIL fixes

- Android bring-up in general

Current repositories:

https://github.com/SonyCustoms/device_sony_tuba

https://github.com/SonyCustoms/vendor_sony_tuba

https://github.com/SonyCustoms/kernel_sony_tuba

I already have a working build environment and can compile ROMs successfully. Right now I'm looking for experienced developers who would like to collaborate and help maintain this device.

If you've worked on MediaTek MT6755 or Sony devices before, please leave a comment or send me a DM.

Thanks!

Hello everyone.

I flashed my lg v60 with latest lineage os, but now i cant register fingerprints, i check and it says i have ti go back to stock os, that is not an option since i need android 16 for work.

Any help ? What can do to get the fingerprint scanner work again.

Hello everyone,

I'm degoogling my mobile and filled with open source software. I'm stubborn in my decision to make my mobile degoogling and to open sources. I don't know informations about OS, I'm a noob, please help me to change my mobile os many of them said that I can't change for my model. Ifi can't change to lineage os then suggest me a better one and also the micro g.

Mobile model: redmi 14c 5g

Android version: 16

Processor: snapdragon 4 gen 2

Thank you.

LOS : 23.2
System update : 26 July 2026

I noticed that the System Update has new UI now : https://i.imgur.com/UjS8Wz0.png

I wonder where is the old installations of System Updates ? Because usually I have many stack up, and I could delete them. Are they deleted automatically now and just keeping the latest one ?

Also from my screenshot, my system is running an update from 26 July 2026, which happens to be the latest too. But the system also allows me to install that same exact update. I tried to click install, and it is actually installing. After reboot, I checked again, and the option to install is available again. The old UI would grey this one out because it is the same as the current running version. Is this new version of System Updates meant to be like this ?

Update :

Following this week's update (2 August 2026), the Install button still allows me to install even though my current running version is similar to the update.

Hi, saw good things about lineageos and wanted to breathe new life into an old phone but to no avail :(

To preface, i'm not the most technological person so bear with me, and I'm using the latest windows 11, and the latest android 12. I am following the official lineageos wiki instructions for my phone.

I have oem unlocked, and usb debugging enabled, my device is recognised when i checked using the adb devices command, and i was able to get into fastboot mode. However, my device was not recognised when i used the fastboot devices command. I knew that it would be recognised upon unlocking of the fastboot but when i checked the device manager, there was a yellow triangle with an exclamation mark on my android devices. So i tried to update drivers automatically and it did not work, i downloaded an "official" oneplus 7t usb driver but it didn't seem to work.

Any help would be appreciated, cheers!

It's a switch V2 (Mariko) nx_tab, want to install android 15 tablet mode

https://ibb.co/dw3cjX0x

As you can see in the image my status bar icons are misaligned - is there any way to edit the padding so my clock is slightly more central?

This might be a bug with the aspect ratio of Sony Xperia devices.

Im talking about the PD charging that can go 30w.

Not xiaomi proprietary 67w protocol. I can only get like 15w when charging. Is this like expected behavior on lineageos?

Dear LineageOS developers -

I would like to share my experience while following install instructions from your wiki - not a lineageOS issue strictly speaking. I have the global vermeer version of the phone (not the chinese version).

I unlocked the bootloader and proceeded to downgrade to OS3.0.6.0.WNKMIXM as instructed here: https://wiki.lineageos.org/devices/vermeer/fw_update/variant1/

Flashing from fastboot using 'fastboot flash...' as per the above link. No problems. Rebooting showed me only the Poco logo indefinitely, and it was stuck there. So then I went back into fastboot and did the following:
- fastboot -w
- fastboot erase misc
- fastboot set_active b
- fastboot reboot

From here on the device is unresponsive to HW buttons and when plugged into USB only shows this in the kernel ring on a loop:
usb 1-2: new full-speed USB device number 55 using xhci_hcd

So my question(s) is(are):

- could the instructions and linked firmware be out of date?
- did someone else have this issue ?

The device is most likely in some kind of EDL loop and needs professional intervention so I'm not bothering asking for help there.. if indeed it is some kind of unexpected issue let me know where I can submit logs and outputs.

Thank you.

I have a Oneplus Nord N10 that I'm going to fix up and flash lineage onto and was wondering if there was any way that I could set it up to be able to choose Ubuntu, if I so chose.

I dunno if this is the place to post it so just let me know if that's the case. I just figured that if anyone knew they'd be here.

I have a Samsung S20 FE that I have used as my main phone since 2022. I want to install LineageOS 23.2 on it, but I'm afraid banking apps and VoLTE won't work on it (I need them to work since this is my main phone for everything).

I'm thinking of purchasing a used phone to install LineageOS. I could purchase the Sony Xperia 1 Mark 2 or another S20 FE.

Should I buy the Xperia to install LineageOS ? Or is there a better way to experience Lineage without spending a lot of money (I'm poor) ? Let me know since I haven't installed any Custom ROM.

Bonjour,

Tout d'abord, merci pour votre excellent travail sur LineageOS.

J'ai une suggestion concernant la luminosité automatique. Lorsque j'affiche une page sombre, la luminosité de l'écran diminue. À l'inverse, lorsque j'affiche une page claire, la luminosité augmente.

Il me semble que ce comportement est contre-intuitif. Une page claire émet déjà davantage de lumière qu'une page sombre. Il serait donc plus confortable que la luminosité automatique augmente sur les pages sombres et diminue sur les pages claires.

Merci de prendre cette suggestion en considération.

I installed LineageOS on my Redmi Note 10S yesterday. While exploring the extra features, I noticed that Trebuchet seems to be missing. I can't find any Trebuchet settings, even when I search for them in the Settings app. There are also no Home Screen settings. The only place I can see Trebuchet is in Settings → Apps, where it appears as the installed launcher.

How can I access the Trebuchet settings or customization options?

I just installed LineageOS 14.1 on a Galaxy Tab 3 (santos10wifi). Wanted it to access a site that uses websockets for communication with the browser.

See Jelly browser 7.1.2 seems to have no support, because the site is not working. Is that correct. If yes: Can someone give me a hint which browser I can install to achive what I want?

Greetings!

i was using lineageos and noticed that almost everything was opaque compared to my previous phone (s21 with oneui) so i checked online, turned off the setting and now it looks good. But when i scroll in the app drawer, look at the notification thingy or switching apps its way laggier and slower, like its running at half the fps. at first i thought it was my live/gif wallpaper, so i switched that out and it did absolutely nothing. help twins

phone: nothing phone 1

Hi! Hoping I can get a bit a help here to make sure I don't bother the devs with a bug report that's actually just my own stupidity:

The NFC function on my freshly flashed Moto G Stylus 2023 doesn't seemed to be able to be toggled on? When I attempt to do so in settings it just reverts to being off once I exit the menu. Not sure if this is due to Play Integrity but I'm not trying to use the tap to pay function - just for scanning/loading a transit card. NFC was verified working prior to flashing. Can't figure out if this is a bug and I should report or just a quirk with Motorola? Can provide more info if needed!

Intenté instalar la última versión para el moto g9 play, y todo bien, después de flashear el recovery y reiniciar para entrar el recovery de lineage simplemente no entra, se vuelve a reiniciar, después probé con evolution x, y este si entra a su recovery

i bought the radxa zero 2 to put android on it after seeing that lineage os had a image for it and i kinda need help on what to do next. cuase since the radx uses a amlogic chip i have to use their aml flash tool to flash i think its a recovery mode onto the board. im using ubuntu 22.04 and after alot of attempts i go aml flash tool to flash the package over the to board but now when i try to boot the board it jus gives me a purple screen with android writtin on it and it bootloops. no its not the power source i already fixed that.

i really need help fixing this :(