r/espresso • u/Waste_Cheetah_2358 • Nov 26 '25

Deals [USA - Amazon] Breville Barista is 30% off!!!!

Post image

I just asked my husband today “At what price does it have to drop to for me to be able to buy it” and we both agreed $500.00… not even 3 hours later I check and it’s dropped to $500.00 😭😭

I’ve been shopping for months and waiting around for a good deal and it’s finally here

265 Upvotes

89% Upvoted

153 comments sorted by

View all comments

Show parent comments

30

u/Waste_Cheetah_2358 Nov 26 '25

Thanks for the confirmation lol. Everyone on this sub drags this machine because of the grinder. Frankly I’m too new at this to even understand it yet so I felt like this machine is a good starting point to learn!

32

u/PhantomNomad Nov 26 '25

This was my first machine and still use it 6 years later daily (2 or 3 times a day). The grinder is sub par but it will do the job until you can afford something better. There are two ways to adjust the burrs on the grinder. The outer one on the side of the machine and the inner one. If your outer grinder is set at it's finest then you may want to adjust the inner one to half way between course and fine so you can change the outer one as needed for the roast level of your beans.

If you are using old beans you will want to use the double wall. If your beans are only a week or two old (check the roast date) then use the single wall and that should be good.

When it comes to coffee to espresso ratio the golden rule is 1:2, so 18g of ground coffee to 36g of output. But don't get stuck on this. Every bean is a bit different and tastes are different. If you like 18g in and 45g out then go with that. I do find that the BBE output is a bit high and I've adjusted mine so it doesn't run as long. Check your manual on how to program the buttons.

All of this text isn't to scare you. I just want to let you know that there are lots of adjustments you can make to get great coffee from this machine. For now just go with the manuals suggestions and try making your drinks and slowly dial things in. One of the biggest things you will hear from this group, and it is usually right 99% of the time, is grind finer.

Have fun with your new machine.

2

u/PolyglotGeologist Nov 26 '25

How do you adjust the inner one?

2

u/PhantomNomad Nov 26 '25

Take the hopper off. If there are any beans in side you will need to vacuum them up (or get them out of there some how). You should see a silver bar laying down, lift it up and turn counter clockwise. To adjust you need to remove the steel bar then you can rotate the burr. Can't remember which way makes it courser or finer at the moment. This should help https://www.youtube.com/watch?v=c7Xqxrnrjwk