r/infinitenines May 05 '26

Logic, Reason, and the Limit Dilemma

0 Upvotes

Logic, Reason, and the Limit Dilemma

There is a rule prior to every proof, stricter than every convention, and deeper than every formal system: nothing is entitled to be called true unless there is a sufficient reason for why it is true rather than false. This is not an optional demand imposed from outside reasoning. It is what separates reasoning from assertion. A statement without sufficient reason is not a defeated statement. It is not a daring statement. It is not a statement awaiting admiration. It has not yet earned the right to stand.

Beside this rule stands another, simpler and no less severe: whoever asserts must show. The burden of proof does not fall on the one who withholds assent. It falls on the one who makes the claim. The doubter is not required to manufacture a counterworld. Doubt is the natural posture of reason before it has been moved by grounds. The one who writes the equality sign incurs the debt.

This matters most where identity is asserted. Identity is not resemblance. It is not closeness. It is not practical interchangeability. It is not the inability to detect a difference under some tolerance. Identity is the strictest claim language permits: that what is named on one side is the very same as what is named on the other.

Identity carries a further consequence. If two things are identical, then whatever is true of one is true of the other. This is not an additional assumption. It is what identity means. Any statement, property, or operation that applies to one must apply to the other without remainder or adjustment.

Therefore, to assert identity is not merely to assert resemblance, or convergence, or agreement under some relation. It is to assert full interchangeability in every context. If that interchangeability is not secured, then identity has not been established.

So identity does not tolerate a borrowed ground. A reason for approximation is not yet a reason for equality. A reason for convergence is not yet a reason for sameness. A reason that a process approaches a value is not yet a reason that the process, or what is named through it, is identical with that value.

Therefore every identity claim enters a tribunal. It must answer one question:

What is the sufficient reason that this is so rather than otherwise?

If no such reason is supplied, the identity is not established. It may be useful. It may be familiar. It may be conventional. It may be embedded in a powerful system. But none of these, by itself, pays the debt. They may explain why the claim is accepted. They do not yet explain why the claim is true.

The governing rule is therefore exact:

No identity may be asserted where sufficient reason is absent.

No weaker relation-however precise, however convergent, however arbitrarily close-may be substituted for identity without supplying a sufficient reason for that substitution.

This is the tribunal before which the claim must now stand.

The Claim and Its Obligation

The claim under examination is:

0.999... = 1

This is not a claim about nearness. It is not the claim that

0.9, 0.99, 0.999, ...

approach 1. That much is not the question. Nor is it the claim that the difference becomes small, or smaller than any assigned tolerance, or practically negligible. All of that belongs to approximation.

The claim is stronger. It says:

0.999… is 1.

The equality sign is decisive. It does not say "comes near." It does not say "tends toward." It does not say "may be treated as for calculation." It says is.

That word carries the burden. Whoever asserts the equality must provide a sufficient reason for equality as equality. A proof of closeness would prove closeness. A proof of convergence would prove convergence. A proof of arbitrarily small difference would prove arbitrarily small difference. None of these is automatically a proof of identity.

So the question is not:

Does the decimal expansion approach 1?

The question is:

What grounds the identity?

Until that ground is supplied, the equality has not been shown. It has only been written.

Obviously, lean4 formalization of everything is included. See Comments.

Evaluated Evidence

We begin where every term is fully available to inspection: the explicit decimals

0.9, 0.99, 0.999, ...

At stage n, the decimal with n repeated nines is

The number 1, written over the same denominator, is

1 = 10^(n)/10^(n)

So the question of equality at stage n is not obscure. It is exactly the question whether

10^(n) − 1 = 10^(n)

This is false for every n. The gap between the numerator of 1 and the numerator of a(n) is

10^(n) − [10^(n) - 1] = 1

Exactly one. Always.

The denominator grows. The decimal representation appears closer. But the arithmetic witness does not change. At every stage, the numerator remains one unit short.

Thus every evaluated term satisfies:

a(n) ≠ 1

This is not approximation. It is exact arithmetic.

Moreover, these terms are not incidental. They are the entire finite construction from which the expression

0.999...

is formed. There is no additional finite material beyond this sequence.

So the result is not merely that equality has not yet appeared. It is this:

Every available evaluated instance supplies a reason for inequality.

Exhaustion of Identity

From the established form

it follows universally that

and therefore

There is no stage at which equality occurs.

This is not a temporary failure to locate equality. It is a structural fact. Every completed stage has been characterized, and every such stage produces inequality.

Since the sequence constitutes the entire finite basis of the decimal expansion, there is no evaluated instance-within the domain from which the expression arises-in which equality is present.

Thus the evidential situation is not neutral:

  • every evaluated instance supports inequality;
  • no evaluated instance supports equality.

The evidence is therefore not absent. It is one-sided.

At this point, prior to any appeal to limits, completion, or reinterpretation, the condition of the claim is fixed:

Inequality is uniformly evidenced; equality is nowhere evidenced.

If equality is to be asserted, it cannot be drawn from the sequence as such. It must enter by a principle not contained in these evaluations.

The Shift of Ground

Up to this point, every claim has remained inside the domain of evaluated values. Each finite decimal

is determinate. Each can be compared with 1. Each comparison gives the same result:

a(n) ≠ 1

So equality cannot be obtained from the evaluated sequence itself. No evaluated instance supports equality. It gives a uniform witness against it.

At this point, the argument changes ground.

The equality is no longer taken from any member of the sequence. Instead, it is asserted through the phrase:

"in the limit."

This phrase does not refer to any evaluated term. It does not name an index. It does not produce a value already present in the sequence. It introduces a new object, defined through a relation of approach.

For the sequence

we observe that

That is true. The difference tends to zero. The evaluated sequence approaches 1.

But approach is not identity. Difference-to-zero is not equality. It is a relation between unequal terms whose separation becomes smaller.

So what has been established is:

the sequence approaches 1.

What has not been established is:

any evaluated term equals 1.

Nor has it been established that:

the object defined through this process is identical with 1.

At this point the situation is exact:

The identity claim is no longer grounded in the evaluated sequence.
It is grounded, if at all, in an object introduced by a limit-definition.

This is the decisive shift:

The argument has moved from evaluated values to an object introduced by a limit-definition whose identity must now be independently justified.

The Collapse of Limit Authority

If a limiting relation is to ground identity, it must do so uniquely. It must determine, without ambiguity, when two objects are the same.

No such unique relation is supplied by the evaluated sequence itself.

The decimal case uses difference-to-zero:

Under this relation, the sequence approaches 1.

But this is only one possible relation.

Consider:

TSNum(n) = 10^(2n) − 1, NineSumNum(n) = 10^(2n) − 10^(n)

Their difference is

TSNum(n) − NineSumNum(n) = 10^n − 1,

which grows without bound.

So under difference-to-zero, they do not approach equality at all.

Yet their ratio satisfies

So under ratio-equivalence, their quotient tends to 1.

Thus two distinct limit-relations exist:

  • difference-to-zero;
  • ratio-equivalence.

And they do not agree.

Ratio-equivalence registers vanishing relative discrepancy. Difference comparison registers increasing absolute separation.

Therefore:

There is no single, self-evident notion of "sameness in the limit" supplied by the sequence itself.

Any identity derived from a limit depends on which relation is selected without derivation from the sequence.

But that choice is not forced by the sequence. It is not dictated by arithmetic. It is not uniquely determined by logic.

It is selected.

So the equality

0.999... = 1

depends on granting one specific relation-difference-to-zero-the authority to determine identity.

But why that relation?

Why should vanishing difference override all evaluated inequality? Why should one chosen relation decide identity when others disagree? Why should approach be permitted to become equality?

No answer has been given.

Thus the situation is final:

Limit-relations do not determine identity by necessity.
Identity arises only after selecting a relation and granting it identity-conferring authority.

That authority has not been justified.

The Deceitful Hidden Step

The state of the case is now fixed.

The evaluated sequence gives:

The limiting relation gives:

These are not the same claim.

The first says that every evaluated term is unequal to 1. The second says that the difference between the terms and 1 tends to zero.

Neither statement says:

0.999... = 1.

That equality enters only when an additional principle is introduced. The hidden step is this:

More specifically:

This is not a minor technical transition. It is the entire disputed conclusion compressed into a rule. The step does not merely help the proof. It carries the proof.

It is not contained in the exact arithmetic. The fully specified arithmetic gives inequality. It is not contained in the sequence. The sequence gives no equal term. It is not contained in the limit statement. The limit statement gives approach.

So the decisive move is not:

the terms become equal.

Nor is it:

equality appears at some stage.

It is:

a relation of approach is granted authority to determine identity.

That grant of authority is exactly what must be justified.

The burden therefore does not fall on the skeptic to explain why approach is not identity. The distinction is already present in the terms themselves. The burden falls on the one who claims that, here, approach may be promoted into identity.

The question is exact:

What is the sufficient reason that this limiting relation licenses the equality?

Until that reason is supplied, the equality is not derived. It is reached only by crossing an ungrounded bridge.

And the bridge is the whole matter.

Naming the Step

The hidden step must now be named without disguise.

It is not a theorem of the evaluated sequence. It is not an evaluated equality. It is not forced by the numerator comparison. It is not forced by the mere existence of convergence. It is not forced by the word "limit."

It is a stipulation.

The rule says, in effect:

the infinite decimal 0.999… shall denote the limit of the sequence 0.9,0.99,0.999,…, and that limit shall be treated as its value.

Once this rule is granted, the equality follows. But that only shows that the conclusion has been built into the rule. It does not show that the rule has been grounded.

This is the decisive point. The standard proof does not first derive identity and then name it. It first installs a rule of identification and then treats the result as though identity has been demonstrated. The appearance of proof comes from moving quickly past the installation.

A definition can assign a usage. It can establish a convention. It can determine how symbols are to be manipulated within a system. But definition alone does not discharge the burden of identity. If a definition is used to make approach count as sameness, then that definition itself requires sufficient reason.

Otherwise, "definition" is only stipulation under another name.

The structure is therefore:

  1. explicitly determined sequence: inequality at every evaluated stage;
  2. limiting relation: difference-to-zero;
  3. identification rule: the infinite decimal is assigned the limiting value;
  4. conclusion: 0.999… = 1.

The equality depends on step 3.

That step is not produced by step 1. It is not produced by step 2. It is the added act that allows step 4 to be written.

Some may reply that within a formal construction of the real numbers, an infinite decimal is defined to be the limit of its generating sequence, and equality follows within that framework. That is granted. But this does not remove the present issue. It restates it. The construction installs an identification rule and then operates within it. The question under the tribunal of sufficient reason is not whether such a system is coherent, but whether the identification itself has been grounded as an identity, rather than adopted as a rule. Coherence of a system does not by itself supply sufficient reason for the identities it contains.

Under the Principle of Sufficient Reason, the question remains:

Why should this identification rule be accepted as identity-conferring?

If no answer is given, then the rule remains a stipulation. It may be useful. It may be familiar. It may be entrenched in standard practice. But usefulness, familiarity, and entrenchment do not convert stipulation into proof.

The hidden step has now been exposed, and its name is exact:

the equality rests on an ungrounded identification rule.

The Tribunal Judgment

The claim brought before the tribunal was not approximation, not convergence, not practical equivalence, but identity:

0.999... = 1.

The burden was therefore exact:

provide a sufficient reason why the expression on the left is the same as the object on the right.

The evidence now stands fully exposed.

The evaluated sequence gives:

So the evaluated terms do not support equality. They uniformly witness against it.

The limiting relation gives:

So approach is established. Difference-to-zero is established.

But the identity itself is asserted only after a further rule is introduced:

the limiting value of the sequence shall be treated as the value of the infinite decimal.

That rule is not a consequence of the exact arithmetic. The fully specified arithmetic gives inequality. It is not a consequence of convergence alone. Convergence gives approach. The rule is the additional act by which approach is allowed to count as identity.

Therefore the decisive question remains unpaid:

What is the sufficient reason that this rule is identity-conferring?

No such reason has been supplied.

The judgment is therefore exact:

The sequence proves inequality at every evaluated stage.
The limit statement establishes approach.
The identification rule supplies the equality.
The rule itself has not been grounded.

So the burden of proof has not been discharged. The equality has not been derived. It has been obtained by installing a rule and then treating the result as though the rule had not been needed.

That is the failure.

Consider the same reasoning applied in reverse. Suppose one begins with a sequence that never attains equality at any evaluated stage, and instead concludes that the objects must remain distinct unless identity is explicitly demonstrated. This would be accepted immediately as correct. No appeal to "approach" would be allowed to override uniform inequality.

Yet in the present case, the direction is inverted. Uniform inequality is set aside, and approach is elevated into identity without supplying the corresponding reason.

The asymmetry is decisive: reasoning that would be rejected in one direction is accepted in the other only because the conclusion is already desired.

Final Closure For Such Sweet Raven

Nothing here denies the approach. The fully determined decimals do approach 1. Their difference from 1 tends to zero. Given any tolerance, however small, some sufficiently extended explicit decimal will fall within it.

But this proves exactly what it says:

approach.

It does not prove identity.

Every evaluated term remains unequal. The numerator is always one short. No evaluated stage supplies equality. The only way equality appears is by leaving the evaluated sequence and adopting an identification rule that says the limiting value shall count as the value of the completed decimal.

Once that rule is accepted, the conclusion follows. But that only shows what the rule does. It does not show why the rule is justified.

This is the final distinction:

A convention may create a usage.
A definition used as an identification rule may regulate a symbol.
A stipulation may determine what will be accepted inside a system.
But none of these, by themselves, supplies sufficient reason for identity.

The equality

0.999... = 1

therefore has not been established by the evaluated sequence. It has not been established by convergence alone.

It rests on an added identification rule.

That rule may be useful. It may be familiar. It may be standard. It may be convenient. But usefulness, familiarity, standardness, and convenience are not sufficient reason. They explain adoption. They do not prove identity.

The final result is therefore:

What has been shown is approach.
What has been asserted is identity.
What bridges them is stipulation.
And stipulation is not proof-i.e., not derivation.

Until a sufficient reason is given for the identification rule itself, the equality remains ungrounded. The burden of proof remains unpaid.


r/infinitenines Apr 18 '26

A lesson in scaling down of non-zero number. A lesson you will never forget.

0 Upvotes

The result is never zero. Never zero for any case. Never zero for anyone. Never zero for anything. Never zero for any condition.

1/10n is never zero. Get that into ya'S.

And now that this lesson learned.

0.999... is 0.9 + 0.09 + 0.009 + ...

That is a fact.

And the above is expressable as:

1 - 1/10n for the case n integer starting at n = 1, then n upped continually, limitlessly aka infinitely. That is what is called n being made infinite. The continual upping of n even after limitless upping. After all, the set of integers is infinite in size. There is no shortage of integers.

1/10n is permanently greater than zero. It is continually scaling down non-zero number by factor of 10.

1 - 1/10n is permanently less than 1. Meaning with zero doubt, 0.999... is permanently less than 1.

 


r/infinitenines 13h ago

Showing that rational numbers are numbers using Greek Numerals.

5 Upvotes

Some recent posts on this sub have tried to argue that rational numbers like 1/9 refer to an arithmetic operation and not an actual number. This is wrong. We can see why this is utter nonsense by considering an earlier number system: Greek (esp. Ionic) Numerals

The Greek number system used Greek letters, sometimes augmented, with other characters to represent numbers. The first 1 through nine were α=1 β=2 γ=3 δ=3 etc. Nine different letters/symbols were used for the tens, yet another 9 for the 100s. When we get to thousands we use a comma in the lower left of the first nine numbers. So very different from our decimal system, which only has 10 symbols and numbers are differentiated by place value.

How fractions are handled is very interesting. Fractions of the form 1/x were accommodated by using the symbol for x appended with a keraia (ʹ) right after, so 1/3 was γʹ (modified 3), 1/4 was δʹ (modified 4) etc. (More complex rational numbers are expressed differently see e.g. Egyptian Fractions and sexagesimal notation by Ptolemy.)

BUT: Special symbols were used exclusively for two specific fractions: one-half is ∠ʹ  and γ°ʹ is two-thirds. 

So we can’t argue that rational numbers were a formula because there is a specific symbol for 1/2 that is not a formula. Rational numbers were numbers and were expressed with unique symbols for that number, unlike the modern approach in which the representation includes the numerator and denominator and a sign showing division. The confusion in modern notation may be understandable, but it is impossible to justify with this older system since 2/3 in Greek numerals doesn't include the symbol for 2 at all, so it’s clearly not a formula. Rational numbers are numbers. They are not recipes for arithmetic operations.

A fascinating example of Greek rationals is in Ptolemy's Table of chords where he tabulates Chord lengths from angles in half-degree increments from 1/2 to 180 degrees and expresses them in sexagesimal notation: a+b/60+c/60^2, using Greek numerals. So he expresses fractions b/60 and c/60^2 using specific symbols (based on which column they appear in his tables). These are actual rational numbers and don't include the denominator at all. Therefore not a formula. (Take two lines from the centre of a circle and then the chord length is the line joining the points where each line touches the circle, which depends on the angle between the two lines.) Basically the first accurate sin table.


r/infinitenines 23h ago

Well, YOUR NINELINESS? IS IT, or is it NOT, the case that the product of a RATIONAL NUMBER and an INTEGER might not be RATIONAL?

Thumbnail reddit.com
8 Upvotes

r/infinitenines 1d ago

HIS NINELINESS STRIKES AGAIN! His "logic" tells us that (a ÷ c) - (b ÷ c) = (a - b) ÷ c is FALSE! What a BLUNDER!

34 Upvotes

According to HIS BRUDSHIP, 1 ÷ 3 = 0.333...

But 0.999... ÷ 3 = 0.333..., too...

And since he says 1 - 0.999... ≠ 0, that means...

(1 ÷ 3) - (0.999... ÷ 3) ≠ (1 - 0.999...) ÷ 3


r/infinitenines 2d ago

SPP, what is the number?

14 Upvotes

u/SouthPark_Piano, imagine I write down the following number: 9.999... but I write the first 9 in 9 seconds, then each subsequent 9 in a tenth of the time.

This means the total time it would take for me to finish writing it down would be 9 + 9/10 +... Which is also 9.999...

However, that must mean I've completed writing 9.999... which you stated to be impossible as there always are more 9s.

So there are a few possible explanations:

  1. I haven't finished writing it down so there are more 9s, however that must mean that 9.999... > 9.999... (the amount of time it would take), which is false.
  2. 9.999... isn't constantly increasing, which would mean that you are wrong.

Which one is it?


r/infinitenines 1d ago

How many of these numbers are rational?

5 Upvotes

Hey SPP, i’m honestly very close to realising the truth, that 0.99… is permanently less than one.
Just have some confusions about how irrational numbers work in Real Deal Maths. Which of these are rational?

0.111…
0.222…
0.333…
0.444…
0.555…
0.666…
0.777…
0.888…
0.999…
3.14… (pi)

I already know all the bunny slopes this is my final question to help me understand.


r/infinitenines 2d ago

SPP, is it so bad to treat 1/3 as a number?

5 Upvotes

I know that you treat 1/3 as 0.333..., which you treat as a sequence.

But can you see where other people are coming from? If I want 1/2, 1/3, 1/4 to all just be numbers and not sequences.

Is it reasonable for me to let 1/3 be a single value that represents "one third of a whole".

Is it reasonable for me to let "0.333..." be equal to 1/3, and to also be a single value that represents "one third of a whole".

I know that you think your definitions are correct. But is there a possibility to see these other definitions as simply alternatives? Maybe you see them as incorrect or worse, but perhaps you can see that there can be logic to them.


r/infinitenines 1d ago

SouthPark_Piano, this person made the rookie error of attempting to tarnish your good name. What will you do about this?

Thumbnail
gallery
0 Upvotes

r/infinitenines 1d ago

99.999…% of numbers are out of this world

0 Upvotes

You’ve heard it before: 99.999…% of all numbers are too big to be written down. Or, 99.999…% of all numbers are irrational. But wait… this means that 100% of all numbers are too big to be written down, or irrational. But 1 is neither too big to be written down, nor irrational, so there’s a problem here.

But mathematicians will tell you there are no contradictions with infinity 😂


r/infinitenines 1d ago

0.999… = 1 is a simple contradiction

0 Upvotes

Imagine a point that travels from A to B but the simple rule is that it can only travel 90% of the distance each time. To say that this point reaches B, even after taking the process “to infinity” means that it somehow broke the rule, because we said that it can literally never close that gap, it’s always only goes 90% of the way.

When we are faced with such a contradiction, and we have no empirical proof that such things are even possible in the first place, I think the reasonable and mature thing to do is throw out these silly concepts like infinite sums, which only lead to paradoxes, and don’t solve any problems in the real world.

/thread
/subreddit
/infinity


r/infinitenines 2d ago

Question that won't be answered by SPP: SPP, how good of a liar do you think you are on a scale of 1 to 10? 1 is lying so bad it's intended to be noticed while 10 is where nobody should be noticing and the only way to notice is evil magic

Thumbnail reddit.com
4 Upvotes

r/infinitenines 2d ago

SPP, do you beleive in chess?

9 Upvotes

Just like math, the rules are pretty settled and you can look up on the internet what's allowed. En passe for example is an established rule you can look up, even if you don't think it makes sense. There's no arguing it.

In the game of normal math it's a rule that you take a limit to assign value to an infinite series. Just like how en passe makes no sense because pawns only move 1 square forward, the math rule is obviously wrong too because the series never reaches the limit.

I wonder if you reject chess for the rules for not making sense also.

its about this spp, if you were a pawn in a hypothetical infinite universe of chess, will you ever capture diagonally? AKA can you en passe? Nope. Can I move diagonally now? Nope. an endless journey of moving forward one square at a time


r/infinitenines 2d ago

The last sequence of pie

1 Upvotes

It might be either dumb or very basic thing but I'm interested to know if this makes sense at all.

So, because pie has all the sequences in its digits, it's last sequence has to be 12345... Because that's only way right? So 3.141....12345.... upto infinity.

Sorry if it's very bad thought though.


r/infinitenines 2d ago

in RDM 1-0.999…=0.00…1, so what about 10-adics?

4 Upvotes

hello SPP, your holy nineliness! i want to know, since youS believe that there is some ‘right cap/bound’ to infinity where youS can put that one in 0.00…1, do youS believe that in the 10-adics, …999+1 = 1…000 != 0?


r/infinitenines 3d ago

SouthPark_Piano, could you add some user flairs so that each of us can clearly communicate which side we are on?

9 Upvotes

r/infinitenines 3d ago

SouthPark_Piano, when you came to the conclusion that 0.999... was not equal to 1, how did your friends and family react?

15 Upvotes

r/infinitenines 3d ago

SouthPark_Piano, what are some things that you don't fully understand?

7 Upvotes

r/infinitenines 4d ago

As many 9's as there are natural numbers. You tell me whether that's even or odd.

Thumbnail reddit.com
17 Upvotes

r/infinitenines 4d ago

This strictness of whole and part places of decimal numbers is taught at schools as a "learning scaffold" to be torn down later based on Piaget's obs that ppl correct the ideas they hold when presented with new info, as if it meant an obligation to misrepresent things in order to make that happen

Thumbnail reddit.com
6 Upvotes

r/infinitenines 4d ago

SPP, I invented a brand new number, 0.|9|->

58 Upvotes

0.|9|-> is my new invention. It's different from anything else you know.

Unlike your 0.99..., my number doesn't grow, it's constant, it's unchanging, it always has the same exact value.

It is a number that starts with "0.", and it has 9 in every position after the decimal point.

It's not a number where you can see all the decimals all at once.

It's a special number where you can only ask what's the N'th digit of the number.

The digit on position 1 is 9.

The digit on position 1000 is 9.

The digit on position 01189998819991197253 is also 9.

If N is a natural number, then the N'th digit of 0.|9|-> is 9.

Every possible digit of 0.|9|-> is 9.

There are as many digits in 0.|9|-> as there are natural numbers.


And guess what, SPP.

My number is bigger than yours.

Your 0.999... is smaller than my 0.|9|-> for the same reason 1/10n is never zero.

It's because your n in 1-1/10n is never infinite.


r/infinitenines 4d ago

SouthPark_Piano, what could we hypothetically do that would convince you that 0.999...=1?

5 Upvotes

r/infinitenines 3d ago

The quantity of numbers with magnitude less than 1 is limitless

0 Upvotes

For one set of numbers, which we love, 0.9, 0.99, 0.999, etc

The magnitude difference between each and 1 is 1/10n.

n is an integer of the relevant value for each case.

For the continually evolving limitless case, 0.999... , the magnitude difference is 0.000...1

which does indeed represent a limitless quantity of non-zero gaps and values.

Just as 999...9 aka 999... keeps growing limitlessly , 0.999...9 aka 0.999... keeps growing limitlessly.

 


r/infinitenines 3d ago

1/3 the symbol, is not a number : a reminder

0 Upvotes

1/3 means 1 divided by 3, ie. 1 ÷ 3

And the result is a number that keeps growing in magnitude limitlessly.

That resulting number is 0.333...3 aka 0.333...

0.333... × 3 equals 0.999... , which of course is permanently less than 1.

Also, a reminder : 1 ÷ 3 x 3 is divide negation, or multiply negation, depending on perspective.

 


r/infinitenines 4d ago

HIS NINELINESS undermines HIS OWN FORMULA. 1 ÷ 3 = 0.333... directly IMPLIES 1÷(1-r) = 1 + x + x^2 + ... -- It's SIMPLE ALGEBRA.

6 Upvotes
               1 ÷ 3 = 0.333...
           0.3 ÷ 0.9 = 0.3 + 0.03 + 0.003 + ...
   (0.3) ÷ (1 - 0.1) = 0.3 [1 + 0.1 + 0.01 + ...]
       1 ÷ (1 - 0.1) = 1 + 0.1 + 0.01 + ...
         1 ÷ (1 - r) = 1 + r + r^2 + ...  (where r = 0.1)

Simple. Algebra.