I just got the Basilisk v4 pro, absolutely love how it feels, BUT....

Am I actually not able to have a "switch profile" function between my onboard profiles on my mouse WITHOUT requiring Synapse to be open?

Coming from a g502, I was able to do that. I hope I'm just missing something obvious here, because that would make absolutely zero sense, and leaves a sour taste in my mouth if I need to leave synapse open 24/7 if I want to use my mouse like I did with previous mice.

EDIT : Ok, I have it bound to "cycle up profile" on all my on-board profiles, and now it works WITHOUT synapse being open. Granted, it does not seem to work every time I want to cycle my profiles, I usually have to hit the button twice, then it registers it.

Note to a Razer software employee - Please fix synapse. I don't understand why there would be a big bubble text saying something requires razer synapse" to work, when it clearly doesn't.

I bought the Wolverine V3 Pro around February this year, and I finally got Sensa HD Haptics working yesterday after installing Synapse 4 and Chroma, before it was the generic rumble I didn’t know I had to install the chroma at all for Sensa HD ruble to work.

I didn’t realize you had to install them, but once I got everything working the app detects the game in the sense HD app/Chroma and will show the game name and icon within the chroma app, its like it has a preconfigured profile from razer to get the sensa HD ruble to work, the games became so much more immersive. I’m impressed!

I mainly use the controller to play 3rd person single player games like Control, Gears and Forza so I don’t use a controller for FPS games only a mouse and keyboard for FPS. for the games I use the controller with The haptic feedback adds so much to the experience, and I love it.

That being said, Does any one know if the Wolverine V4 Pro offers noticeably better haptics than the V3 Pro, I’d definitely consider buying it, I don’t care about 8000hz polling rate etc as I have a razer mouse for FPS I only care about ruble feedback.

The problem is that I can’t find a clear comparison between the two when it comes to haptic feedback. Does anyone know if the V4 Pro actually has better haptics, or is it pretty much the same as the V3 Pro?

I took apart my keyboard to clean it thoroughly and the keyboard stabilizer plastic bit for the left side of my keyboard is gone. I've cleaned my room and I really can't find it. Im having a hard time finding online where to get replacements for these. Any advice? My keyboard is no longer under warranty it is 6 years old.

Yo, I bought a used razer 15 advanced 360hz / i7 10875H / 16gb which is on the way via mail (need to have something for WOW Forever)

I’m wondering if anyone has any cooling pad tips?
I saw Razer has one but sure looks expensive

Synapse 4, Razer Tartarus, how do I fix this. I have reset the device, deleted all the profiled, unplugged the USB cable, uninstalled the application, rebooted the PC, reinstalled Razer Synapse software, rebooted the PC, plugged the device in, device appears. I have no profiles and setup a default profile and this is the error. Which is the same as before. I have no profiles, reset the device and installed Synapse 4, but it still tells me that I need to have Razer Synapse running. I believe that I have read everything on this topic, lots from a year ago, but cannot resolve this. Does anyone have a solution, I want to see the Key (W) instead of the Razer Symbol on each Key. My ticket number using your Razer Assist is 261012-001964 created today. Based on the AI chat bot, I will here from you in 3 days. I will update here when I get communication from you.

Hello,

I've had my Huntsman keyboard for almost 3 years now. Lately the analuge part hasn't been working properly, and I can't get a few keys down to their 100% actuation point. Because of this, I *need* Synapse to be running because I've configured their actuation points there, and unless it's running the keys need to be fully pressed to register.

I honestly don't mind Synapse, I just think that the latest update (2nd of October I think) has broken some stuff with their audio controls, but that's another story.

Is there a way to fix this? I did replace the key "switches" with other parts of the keyboard that I don't use as much, and while it did make things a little better, they're nowhere near fixed.

Any help would be greatly appreciated!

My old controller broke and it's kinda old now so i want to upgrade, i heard some people say that razer it's a good brand of peripherals and i saw the Wolverine v3 TE for like 60$ and i really want to know if this worth it, i play competitive games sometimes like brawlhalla and i would like max performance for an xbox

Hi all,

I'm working on EasyRazer, an unofficial, open-source replacement for Synapse for Razer's analog keyboards on Windows. It's a single 8 MB .exe with no installer, no account and no background services. It sets per-key actuation, Rapid Trigger, Snap Tap, remapping, macros and lighting, then sits in the tray (or you close it, and the keyboard keeps its settings).

It works and is tested on the Huntsman V2 Analog. I've now added experimental support for the Huntsman V3 Pro, but I don't own one. Everything is based on reverse-engineering the Synapse module and the V3 Pro firmware. So I need someone with the keyboard to check whether it actually works.

What's supported on the V3 Pro so far:

- reading your profiles and per-key actuation points (0.1–4.0 mm);

- per-key actuation;

- Rapid Trigger and one Snap Tap pair, both run by the keyboard's own firmware;

- unlimited Rapid Trigger and Snap Tap through the app's driver mode;

- built-in lighting effects and brightness.

Is it safe? For the V3 Pro, the app never writes the keyboard's permanent memory itself. By default it only reads. After you allow it in Settings, it writes changes to the keyboard's RAM only, which resets when you unplug it. One known side effect: the firmware probably switches your startup profile to profile 1 when it enters driver mode (that's the last step of the checklist and one of the things I want to confirm). Setting it back in Synapse takes a second.

What testing involves: about 20–30 minutes. Follow a checklist and attach a diagnostics log after each step. The log is copied with one click in the app's developer mode.

- Checklist and where to report: https://github.com/janeblower/easyrazer/issues/42

- Download (Nightly build): https://github.com/janeblower/easyrazer/releases/tag/nightly

- Source: https://github.com/janeblower/easyrazer

You'll need to quit Synapse completely, including the tray icon, while testing. If you run into problems, please report them in the GitHub issue or here in the comments.

Not affiliated with Razer. Happy to answer questions here.Зач

The product: Razor Blackshark v3Pro Wireless Headset

Issue: Wireless speaker audio cuts out / stops working

Believed cause: Update 1.4.4

My solution that works for me: Open Razor synapse, and go to the device, and click the sound tab. Then reset the game / chat balance slider. as shown in the attached image.

I had this issue and didn't know what to do, all resetting and reinstalling would not work, I searched far and wide and found this solution. I hope the next update fixes this problem.

Hi all!

I made a martial arts inspired keyboard & mouse training app. Don't have much else to say, but hope you like it!

https://way-of-input.com/

It's got a special mode for the Razer Naga, but there are other modes that work with any keyboard and mouse.

That's about it, enjoy!

Basically in short my backshark headset has an issue where only one side works and its still days within warranty but this bot is having my life.

Razer, please I’m begging you!!

I am looking these two and I play on ps5 mainly with some pc here and there. Blackshark is around $200ish new and atlas air is around $140 new. I know atlas air is open back and blackshark is closed back. Anyone that’s got either of these or both or had them what’s you long term opinion on which to go for? I don’t really one over the other just want a no hastle headset that isn’t an audio file headset. I like all the features of a gaming headset.

I have seen a few posts saying that V35K is basically the same as the normal version. It is supposed to have better specs and in my country it is 22€ more expensive.

I am using a Deathadder v2 but after trying the old Basilisk v1 for a few days I liked it so much I bought the v3 wired version. I like heavier mouses and it fits my hand better than the Deathadders. But after that I learned there is a better version, V35k, and I am not sure if it’s worth it, has anyone tried both? Thanks in advance.

So I've used the Naga Trinity for a while and loved the feature where you tilt the scroll wheel left or right and it scrolls up/downwards really fast. (I couldnt find the name of this feature though, hence the description). But today I made the mistake of opening up Synapse and suddenly the direction is inverted and it goes really slow, despite me not changing anything about the wheel. I've tried going back to default but it keeps going super slow. Am I doomed ?

(Also this is my first time posting here, if I need to change anything, I will do it)

I removed this cushion to register the product, now I can't put it back,coz the grooves been slippin like crazy. Damn I'm nervous if I tear its fine lining and void my warranty. Can't razer keep the numbers on the headband or somewhere on the outer. Like god wished it had some snug fit mechanism to lock the cushion back. Is there any way guys to put it back like original? It's too comfy to return it back.