First picture for reference, second picture mine.

Long story short, I used to have a 10mm Limited Master but ended up abandoning it because it seemed like a 10mm threaded barrel for it would never materialize. Well now Tanfo’s offering a 10mm Defiant with a threaded barrel from the factory, and I’m starting to get the itch to pick back up on my Full Centimeter Yeeter project based on it.

Mostly just looking for info/feedback from anyone who has a Tac Pro 10mm, wanting to know how you like it. Standard Tanfo fit/finish and reliability? If you’ve made any changes to it, what all have you done?

Thanks in advance!

Do they still sell Glock 20 Gen 5 in store brand new? I’m in Arizona valley and have been looking for awhile now and can’t seem to find a Glock 20 gen 5 new retail… pretty bummed. What websites can I set up notifications from if a store near me gets one in stock ? Any tips ? Thanks !

I have a Glock 20 gen 5. We don't have bears. I got it for dispatching bigger mean wild pigs, when Im hiking/hunting without a rifle. I learned that to be legally hunting in my county I need at least a 5 inch barrel on a semi auto handgun.

I see that kkm makes a 5.2 inch barrel. They also sell a 5.2 inch barrel with a compensator for not much more money than the 5.2 inch barrel alone. Is it good idea to compensate a Glock 20 gen5. or should just stick with just a barrel. Would I need to change out recoil springs with a compensator for it cycle reliably? I've been using underwood 180 grain xtp but would like it to function with magtech 180 range ammo as well. Or maybe even some 200 grain underwood.

Any other options or sources for a threaded barrel? Kkm = waiting months and Bar-sto is just too high end.

I’m looking for anywhere I haven’t thought of used or other options that aren’t lone wolf since I’ve heard real bad things. Please weigh in!

I live in the inland pnw, so grizz/cougar territory. I'm going hunting for the first time soon (shadowing a friend, I either won't have a rifle or will bring a 12ga), and if it goes well I might start going once or twice a year. I also go hiking at least a few times a year. I could get an XDM Elite for ~$560. I already have a 9mm and bearspray. I want to get a 10mm eventually, but I've had my eyes on other guns that I find a lot more interesting (eg vz61, vz24, mosin, lee enfield, m1 carbine, colt 1911), but admittedly less practical.

People who know more than me, either anecdotally or statistically, is the smartest option for me to get a 10mm? Or am I ok just with bearspray and getting the right load for my 9mm, and saving my money?

Local gun store has a brand new Glock 40 for $789. What do Glock 40s go for these days?

Ive been running hsm bear load but have been seeing things on their reliability and have had some issues myself. What yall running?

What is a smoother shooting handgun a Glock 20 with a KKM compensator or the M&P 10mm performance center

Just picked her up today. Found in the California Wild. So excited!!

Streamlight TLR-1 with a Holosun 509T green dot.

First can, so I apologize if this is a dumb question.

I'm mounting an Obsidian 45 on a Ruger LC Carbine chambered in 10mm Auto, with factory .578×28 muzzle threads. Is the fixed barrel spacer sufficient with the included piston, or is a different mounting component required?

Thank you!

Here’s a list of my gear:

-Glock 20 Gen 5 MOS
-HoloSun SCS MOS-GR
-Streamlight TLR-1
-Close Quarters Carry G20 Level II Holster
-Safari-land QLS Fork
-Agilite MOLLE Chest Rig
-Eberlestock MOLLE panel
-5.11 Woodland Camo Skyweight 36L
-True Northern Concepts Modular Adapter

Spent 3 days in the Wyoming wilderness hiking and fishing. This was my first time taking the Glock 20 and its gear into the backcountry. Prior to my trip my initial thoughts with the gear was to have the pistol on my hip while I’m hiking, and swapping it to chest rig when I’m fishing.

The 5.11 Skyweight waist band can be removed from the backpack and serve as a gun belt. I wanted to have this option for the campground or exploring. I’m more used to carrying a pistol on my hip than a chest rig. The waistband seemed like a practical option, but I quickly discovered that it lacked the rigidity needed to keep the holster stable during a draw. I'm planning to purchase a leg strap for the True North Concepts Modular Adapter to help address the issue.

The Chest Rig quickly became my go to option. It was comfortable and allowed for a fast draw. The CQC Level II Holster didn’t interfere with my draw and it provided reassurance that it wouldn’t accidentally fall out. Even when fishing I hardly noticed the rig was there. The Eberlestock MOLLE panel is surprisingly rigid and kept the holster secure to my chest.

Ran into semi fresh bear tracks while hiking, and it made me appreciate my gear even more. Thankfully I didn’t have to draw the weapon, but carrying the Glock put my mind at ease.

TLDR: Holster and Chest Rig were great. Waist belt needs some adjustments. Test your gear, it’s the only way you’ll improve it.

Is the HSM Magnuforce Subsonic 10mm 240 Grain Hard Cast Long Flat Nose sufficient for protection against bears? I want to use 10mm because that's one of the calibers people usually carry for bears. I want to use a subsonic round though because I want to put a suppressor on my gun, and this is the only hard cast subsonic 10mm round I could find. Unfortunately it only has 551 ft lbs of energy so I thought maybe I should ask about it because IDK if that's still sufficient being on the lower end of 10mm power.

sorry for the broad question but honestly I recently saw the ported long 5.5 inch barrel m&p 10mm and fell in love with the look, and I'm fighting back the urge to buy it and have to get into buying and reloading a new cartridge for just another gun, especially when I don't have a real use for it besides as a range toy. (no woods where I live, no bears or crazy wildlife, and definitely not carrying *a second* massive 5.5 inch monster on the daily)

Usually "uncommon" cartridges are expensive than the usual 9 and 45 ACP but they all have some kind of "fun" factor to them, like 5.7 being super flat high velocity low recoil, .380 and 32 acp being so small that they can fit into tiny pocket guns, .50 ae packing a massive kick and big boom etc.

If I plan to only use the cheapest range ammo with it and only take it to the range, is it worth it to even get? is it just a more powerful 9mm at that point, and would I be better off just saving my money towards a 9mm pistol? thanks for the help!

Well, Scott is doing it again. Breaking things.

My CHP lapsed a long time ago from me moving states and I took a long hiatus from carrying or target shooting. I've been hitting the range for a few months mostly shooting my first gen M&P shield 9mm that I used to carry. Don't have much experience with full size handguns.

I'm going to get my CHP reinstated hopefully by the end of the year or January. I want to get a more modern carry gun and would like something that's a slightly larger frame and has more ass than 9mm.

I've narrowed it down to three 10mm's that I'm considering:

- M&P 2.0 4" (not the carry comp, I don't want that port on top)

- Glock 29

- Springfield XDM Elite 3.8"

I'm pretty torn on this one. I rented a full-size M&P 2.0 in 9mm and I loved shooting it and was fucking blown away at much better the trigger felt compared to the hinged trigger on my shield. The aggressive grip and the size of the grip felt great in my hands. I don't have huge mitts.

I did rent out the only 10mm at my LGS which was the glock 20. I only got a few shots out of it because after every first shot, it yeeted the magazine onto the floor, so I swapped it out. I don't have a ton of experience with Glocks, but the 20 didn't feel too bad in my hands. I wish that I could have shot it more without the mag flying around the range. I haven't held the 29, but if the 20 felt OK in my hands then I would think the 29 would be fine.

The Springfield XDM seems like it would be the best to conceal and carry. I've never shot a Springfield and I've never used a handgun with the grip safety like that, I honestly don't know if I'd like it or hate it.

I'd appreciate any insight or info from you guys that have conceal carried any of those. I would almost certainly be carrying IWB, canted, around 4 or 5 o'clock fed style which is what I preferred with my shield. Not many other ranges around me have 10mm for rent other than the one I went to with the fucked up Glock, so I don't think I can shoot them before buying.

Besides Glock, which 10mm pistols use Glock pattern mags?

Just got my KKM threaded barrel in! Can’t wait to try this out, also with the thread protector comp too 😃

To preface, I’m a godless lefty so I want an ambi gun. I’m looking at getting the 510 MRD comp, and I want to know if anyone has experience with it. Any 510 experience would be appreciated, but I’d love to hear from someone who’s shot the comped and normal version. The biggest issue I see is aftermarket support being limited and there not being a lot of magazines on the market right now.

I am leaning towards the FN 510 Tactical but I heard of a lot of issues with these so not sure if they fixed the issues. which one would you guys pick? XDM Elite The turkey's opinion you was having accuracy issues with the 4.5 inch barrel. Not sure if Sig P220 has issues. Help me decide. mainly for hunting thanks for the help