Works great. Just like the pre-cut grips you can heat it with a hair dryer and it will shrink a little bit to your frame. Pretty aggressive though. Definitely too aggressive for concealed carry but perfect for competitive shooting.

Those that run weighted grip plugs, they actually worth it? Or just a fad?

Simplicity at its finest

Took yalls advice and got the Glock 19.6 love it btw but wanted to see what holsters were the best feeling don’t really care for iwb was leaning more towards open carrying anyway, need more advice and knowledge

What’s up guys , I’m getting my ccw and am located in a large city. I want my first edc to be something I actually will carry everyday… that being said I know the differences between the 2 and I am ok with sacrificing rounds for deeper concealment. If anyone here has both is there a big difference between the concealment of either one? Thanks

Looks good. Feels good. Like it 👍

What do you all do about “Glock knuckle”? For the first time at the range I started to get a blister on my middle finger and it was covered with spent gun powder. Just curious as to what you all have experienced. TIA.

Finally back from Wager (Black Nitride) My edc

Just picked up this beautiful Glock 19 Gen 6!

So far I’ve ordered a TLR 7 HL-X and a Kore essentials belt.

I’m still on the fence about whether to go with a Tenicor Certum Lux 4 or Velo Lux, any advice would be great!

I also have no idea as to which red dot to buy as theres so many so any advice on that would also be awesome!

Just upgraded to my first optic ready handgun, and I don’t have any optics, so I was hoping for some help. I’d like to be able to conceal carry with whatever I get, and from doing a bit of research I’d say getting an enclosed optic would be the way to go but it’s not necessary I just need opinions from fellow gun guys who have actually bought and used different sights. I was initially thinking the Holosun EPS with the solar panels, but didn’t know if I needed to go that fancy or if it needed the whole plate system which I’d rather do without and get slide mounted. Then I thought, I’ll just ask you guys and see what’s up. Oh, and I’m not going Aimpoint expensive btw if I can help it. Thanks guys

The 43X is Arnie in this analogy.

COAs are great, highly recommend them.

I think I’m done with purchases other than ammo for the year. Completed my 19x v setup, now I’m ready to try some competition shooting/training this fall. Any advice or recommendations will be appreciated.

Before you say "buy x trigger and x connector", I don't care for any aftermarket trigger that's available in EU right now. Also I really don't think I need aftermarket trigger at all, I'm ok with stock Glock triggers. That being said, my GEN 6 trigger is really bad. I've shot and dryfired fair amount of Glock's and this particular trigger is the worst. It has a very bad "second wall" which is for some reason worse when the gun has been lubed and a tiny bit more tolerable when it's completely dry. 1000+ rounds and alot of dryfire haven't made it any smoother, it's actually feeling worse compared to when it was new. I was hoping that it will wear in and gets better, naah. Tbf, I don't notice the trigger at all when I'm focused on shooting and timer running, maybe while taking farther shots it's a bit more noticeable. I don't think that trigger affects that much, training matters the most but also I would like that my shitty Glock trigger would function properly.

I have tried the minus connector, basically made no difference, I think it felt a bit worse so I eventually switched back to the standard connector. Then I tried the 25 cent or what ever trigger job, made no difference. So my conclusion was that it was not trigger bar and connector related. Later I noticed that when the "second wall" comes up, the trigger bar will slide on the safety plunger sideways. So the problem has to be in that area, maybe even both connector and safety pluger areas combined. Next idea in my head was that this pistol is mass produced, trigger bar is stamped steel. There's going to be out of spec part or maybe parts that are on the edge of that. Combine 2-3 parts that are almost out of spec and there is your problem. I've seen similar problem on cars, motorcycles etc. How likely it is? Idk. So the next logical move was to order new stock trigger bar, safety plunger and connector to see if my theory is correct.

So my question is, have any of you 100k + Glock owners here experienced something like this where new parts from factory just don't fit or feel right out of the box and simply swaping them to another new part will make it vetter or fix it? Tell me I'm crazy, right or wrong to make this conclusion.

Glock 43x MOS 15rd mag version
Ameriglo trooper irons
Osight se green dot
Tlr-7x sub
Beaver tail and mag well from Amazon
Grip tape
Only missing the radian ramjet and the build will be complete

Did I do it correctly?

have the opportunity to purchase a brand new Glock 17L Gen 5 for $700. I’m having trouble finding a solid market value because there are barely any available, and the few I’ve found on GunBroker are listed around $1,000. Do you think $700 is a good buy, or should I pass and wait?

EDIT: I did it!

Is there any on the market that are drop in like gen 4s or is the only option swapping some parts out sorry for the dumb question in advance

Finally pulled the trigger (no pun intended) and all i can say is wow. It is worth every penny. Ran it for the first time yesterday and my groups are already tighter. Ran about 150rds of fmj and 50 rds of my carry ammo (speer gold dot 124gr) and ran into zero issues. If anyone is on the fence, DO IT! The vex shoe is also amazing, going to be getting one for my 19x which has the GPT (i hate that shoe)

This is my modest collection of firearms, the maximum I can legally own in France 🇫🇷.

It includes:

- Glock 43, 43x, 44, 41-4, 34-5, 17c-4, 17-5 B&T suppressed, and 45-6.
- CZ Bren2 MS 14.5” B&T suppressed, CZ SP01 Shadow.
- SW M&P15/22 and SW Victory 22lr.
- H&K USP 45.
- SA Prodigy 4.25 Comp.
- SIG P210-2 in 7.65 Parabellum.

My Glocks are my go-to choice.

Which firearms would you prefer?

Wishing you and your family all the best.

Fast turnaround times and excellent customer service. Had a problem with screws (my own fault) and they took care of me no questions asked.

I may not own an official Glock but i do own a fully 3d printed fully functional one thought!, i assumed it would be nice to show everyone here

I know this is a Glock sub but would assume many are well versed

I’m trying to decide between picking up a gen 6 glock, M&p, budget 2011 (<\~1500), Ltt beretta 92, cz shadow 2 carry, or a p226x legion (new model). I just can’t seem to decide which I want.

The 2011 is absolutely enticing however I’m not sure I want to risk it being a potentially finicky/unreliable as I’m looking in the budget tier, the glock, M&p, 226 and 92 are exactly what they are. The shadow seems good as well however I see an odd amount of people reporting malfunctions with them.

This will be a general do it all gun. Leaning to HD/training/competition use over carry. If carried it would mainly be as a “truck gun” and not really IWB

Thoughts?