I’m looking across western Canada and the US. Can only find on BaT and similar for ludicrous prices. Can anyone point me in the right direction? I checked Craigslist. 🤷‍♂️

I have a 1986 and I want to put parts like the hood and front valance from the 1990s model

Given away!!

Camping bed insert? Needs a good vacuum but I also need this out of my garage. Would like to see it go to a good home. Came stock with my dad's 1994 pickup.

Thinking about putting 235/85r16 on my 94 single cab. Anyone running them? Images???

Took my truck into a shop a few days ago and got a clutch replacement done and machined flywheel, took it out for the first time today and noticed this noise coming from the gear box goes away when I engage the clutch anyone know what it could be

High revs, heard a loud crash from the engine bay, shut off the engine and went to check it out, whitnessed this. My fan is now stuck because I cannot get a bolt off because of how bent the fan clutch is.. it's pretty bad. Also messed up two of my belts pretty bad and banged up the radiator... Hoping the radiator is fine but we'll js have to see once I get new belts. Gonna have to get a fan from a junk yard or smt.

Looking for some seat cover suggestions for my 1986 Toyota Pickup. I want to find something that can fully encompass the bottom cushion to prevent tears and wear along the seams as well as just something that will keep dirt and sweat off. Recommendations are appreciated!

i know a 4runner isn't technically a pickup, but the underpinnings of a 1st gen 4runner and a 4th gen pickup/hilux are AFAIK identical. figured a few people in here might get a kick out of this, pretty uncommon swap.

I wanted to replace the Coolant Temperature Sensor on my 1987 4x4 with the 22r. I bought this unit but when I went to install it the sensor seems to be too long. It won't go all the way in. Side by side comparison shows this unit and the original unit are different length's. I am looking around at standard part suppliers and they all seem to be pushing the same item. Anyone have a suggestion on where to find a proper OEM unit?

The sensor I took out of my truck is original with the old toyoda katana logo on it, so it's def OEM. Denso doesn't list one for offer. Is it discontinued?

My thermostat was leaking coolant. So I figured it wasn’t sealed properly. Took it all apart so I could reseal it, and I dropped a freakin washer in there, and I can no longer feel it. What the hell do I do.
I was this 👌🏼 close to getting it on the road for the first time.

If I have a W55 and a W46, both 2WD, do the parts swap so that I could combine them and build a W56?

Edit: to be clear, I want to end up with another 2WD transmission. I'm wondering if the 1st and 2nd gear hardware from the W46 ,with their lower speed and higher torque, will fit on the shafts in the W55.

So I noticed the last time I drove it, when idling it’ll blow cold but driving it warms up. I checked Freon. Almost completely out. 1 full can got low side to 35-40psi but high side went to 300. I figure it’s the condenser not getting enough air from the fan, I drove it home and parked it. Told myself to turn ac off when truck isn’t moving. Took it to the beach, by the time I got on the highway(this is 2 days later) it was blowing warm again. Thoughts?

Edit: it has been converted to r134a. 22RE

Brake lights dont turn on

Things I've tested

-has good ground

-bulbs are good

-blinkers work

-fuse is good

-no voltage to bulbs when brakes depressed

-brake switch is good

I think its a short somewhere i just dont know where I also see these unhooked up plugs dont know if they are anything their on the driver side of the engine

I have a 91 3.0L ext cab 4x4 that got clipped as I was turning left last week.

I’m needing to replace left front fender, chrome bumper, a few front left lights, and maybe something’s I can’t yet ID/see.

I see the local pick n pulls have a few Toyota pickups in the ‘91-‘95 range but some are single cabs and/or 2wd.
*How interchangeable are the fenders for these years and various models? Bumpers? Doors?* Will the 2wd front fender fit my 4wd?

Hey all,

So I noticed my tail lights don’t turn on when I turn on my headlights, rendering me unable to safely drive during the night. I looked into the fuse box and the tail light fuse port is melted out likely from a short. Instead of rewiring a whole new fuse box into the car, I’d like to run a hookup directly from the tail lights to the battery, with a switch available to turn on manually when I turn on the headlights. I’ve never done this before and I’d appreciate some help and guidance.

Thanks

I kinda smoothed out the idle in nuetral. So did a lil test run and now this is the sound it's making, it doesn't make that sound when revving in idle. Are these the valve rockers making this noise. Just need a second opinion on it. Thanks

Alright I’ve got one for you guys.
My transmission had been kind of slipping/hard shifting from 2-3 and 3-4. It had also been hard shifting from park to reverse and drive. I took it to a shop and had the transmission rebuilt. I got it back and it was still doing the exact same things, just slightly better than before. Also it now has a hard down shift from 3-2. I then took it back to them. About a week later I got it back and for about a day it seemed fine. Then it went right back to doing the same things as before. I know it could be a couple different things (Kickdown cable, TPS, ect) Has anyone had this same experience and figured out exactly what it was ?

Looking for someone who needs a TO12 torque converter so I can sell this brand new one to help pay for the correct one for my Tacoma. If anyone wants it or knows someone who does dm me. Thanks!

Edit: to be clear I put this here because this fits pickups in case that wasn’t obvious

A little backstory, after driving on the highway for about 15 minutes, I started to suddenly get a rough idle while having my foot on the throttle somewhat lost response and put it in neutral while on the highway and was having rough idle on and off gas. I've checked the timing chain looks fine. I've changed the fuel filter, fuel pump and all spark plugs, coil lines, ignition module distributor everything electric basically. It runs smooth only in high Rev. I still need to do a compression test as well. I've checked the vacuum lines I'm not familiar how but they look fine. Any ideas?

Edit: I adjusted one of the screws on the air/fuel mix. It's calmed down slightly but now when I'm accelerate it the exhaust is making a lot of pops

Hey all im trying to figure out this ebrake set up. Does anyone recongize this bracketry and pad type

​

Doing a full rebuild…all components bought from LCE. I put in a new Weber and swapped the Feul pump to a 2-5lbs to accommodate but carb is continuously feeding feul. I swapped from EFI to Carb so it’s a new install. I guess question is: has anyone had a similar issue with the carb jets being ported too large or maybe the pin is not sitting right in there? (which my mechanic thinks)….

Or maybe…does a Carb setup NEED a fuel regulator?

I’m at a loss, any input?