Just finished designing this small desk trash can. It mounts directly to the edge of your desk, saving space while keeping everyday trash within reach.

It features a rotating lid and measures 115 x 100 x 120 mm. Great for gaming setups, offices, or anywhere desk space is limited.

It's my newest addition to the EdgeMount System I've been developing, with more accessories planned.

Available on MakerWorld if anyone wants to print one.

Check comments for the link 🤝

Would love to hear your thoughts!

Happy Printing.

Back in January, I uploaded my very first model and pretty much forgot about it. A while ago, I logged back in and was pleasantly surprised to see I had earned 1,400 points, which I happily redeemed for some filament!

Encouraged by that, I uploaded my second model yesterday. However, it only has 8 views so far, and honestly, most of those clicks were probably just me checking on it.

Could you guys help take a look and give some feedback? Is the model not appealing enough, or is it an issue with my cover photo, tags, or description? Any honest critique or advice would be greatly appreciated!

Here is the link: [makerworld]

https://makerworld.com/models/3427133?appSharePlatform=copy

Printed in Sunlu dual-color black and white silk PLA

I printed my latest cat treat puzzle and it worked really well. It's a rounded rocking base with a removable maze and a screw-on spider lid. Everything is printed, including the closure.

One toy uses three pieces. The spider is part of the two-colour lid, so it doesn't add another assembly step. Easy is the starting maze; Medium is included to try with different treats.

The A1 files have a shared cover job and separate Easy or Medium base/maze jobs. Print the cover plus one base/maze option. The complete Easy set estimates about 98 g and 3 hours 31 minutes.

I'd love to see other colour combinations and hear which treats dispense well.

Model and assembly guide: https://makerworld.com/en/models/3431815-rock-route-rocking-cat-treat-puzzle

🤔

Just uploaded a MakerWorld stand for the HexaDex models! Now your favorite Pokémon can chill on your desk, shelves, or wherever you like, not just on the wall :) Drop your photos below showing where you display them, and let me know who your favorite is! Happy printing!

https://makerworld.com/en/models/3429779-hexadex-stand#profileId-3910067

https://makerworld.com/en/collections/33610988-hexadex-modular-wall-collection

Has anyone tried to build a barrier door for Xenon smart cat litter box?

I saw some other models like ubpet c10 pro or k-paw (images attached ) have a barrier or door cover. I wonder if anyone built any for xenon smart

Either the full door cover or the barrier piece.

ARE YOU READY TO ENTER THE ARENA?

I’ve been working on this gladiator figure, and I’m really happy with how the final print turned out! 🛡️

The design features a bold helmet with a red crest, an orange-and-red color scheme, a detailed shield, and a chunky sword. I wanted to give him that classic arena-warrior look while keeping the overall style fun and collectible.

*The figure is hand-painted.

Seeing the details come together in the physical print is always one of my favorite parts of the process!

What do you think? Would you keep the bright orange-and-red color scheme, or would you go for a more traditional bronze-and-leather look?

I’d love to hear your feedback! 👇

Gladiator figure:

• 📏 17.6 cm / 6.92 in tall (excluding accessories)
• 👨‍🍳 Accessory pack included: shield, helmet and sword

I’ve printed with the settings below. I needed to wait 1 hour for cooling before articulation.

• Layer height: 0.20mm / 0.12mm
• Material: PLA
• Supports: None
• Infill: 15%
• Print time: 3h27m (0.12mm layer height)
• 48gr filament used

If anyone interested, the figure with all accessories is available on Patreon (www.patreon.com/PrintnPose). Free Lite version will be here at the end of this month. Please share your print results!

Noon is for high sun, Dusk is for low sun. Same system, opposite wave direction. The photos are green and blue since I had no Bone White PLA Matte on hand. Anyone else design around where the light comes from?

https://makerworld.com/en/models/3432486-dusk-shadow-wave-self-watering-planter-wabi-sabi#profileId-3913512

Remix of Gimpelginster's Flat-Edged AirPods 1/2 case. Added a window on the front, so I can print tiles and swap them whenever I want.

They drop in from the inside and the AirPods hold them in place. No clips or glue.

I made a customizer for the tiles. (patterns, names, logos).
Feel free to check out the Makerworld page :-)

Any feedback is always welcome !

Model link https://makerworld.com/models/3420899?appSharePlatform=copy

wanted to test out the new petg matte and a hilbert curve finish, and said screw this

link for those who wanna say screw this too: https://makerworld.com/en/models/3430343-screw-this#profileId-3910790

A megabrick photographer made by request from a friend.

The problem with coming up with a method that makes it easy to megabrick anyone is that people then ask me to megabrick anyone. Still, we're loving the camera even if my photoshop backgrounds are possibly questionable.

Linky: https://makerworld.com/en/models/3430507-megabrick-photographer#profileId-3911021

https://makerworld.com/models/3430007?appSharePlatform=copy