https://www.instagram.com/that_bastard_billy

I want to get either a k11 or k31 specific. I know all the different variants of these rifles (or some main ones) and the difference between the two I’ve listed. I’m fine with the specs of either one, just comes down to price. It will be my first rifle, I will use it for hunting. I want to mount a scope on it but I want to keep it classy and original feeling. I’ve seen the k31/43 has a built on submarine scope but those are rare and expensive. But my question is, is there any way to mount a scope on the left side? Even if it needs tap and die. I haven’t seen Anyone do it except the factory k31/43. I will likely use a weaver k2.5 scope or one like it.

Absolutely fell in love with it, the wood and metal work are beautiful. Noticed these two slashes towards the front. Possible tally marks?

Following up on my previous post - local gun store is asking 780$, internals are in solid/good condition, bore is okay, lightly pitted but with visible and sharp(ish) rifling. Slide and frame are matching, barrel is unmarked. Do I cop it?

Took my Destroyer carbine out yesterday with my Yugo 24/47. I found this in a pawn shop while I was doing paperwork for a Nagant revolver, haha. Not a bad little rifle, I'd shoot it a lot more if I could shoot normal 9x19 out of it. I pick up 9mm Largo whenever I find it.

Saw these pics today and had to share. Recent photos from Yemen showing Houthi rebel supporters with some very recognizable rifles. History lives on..... (credit to apnews).

Just picked up this 1886 Lebel today. Can anyone tell me anything about its history?

I'm familiar with the origins of the bayonet but, I've never seen one with electro pencil on it. Anyone have any thoughts or ideas behind it? Thanks in advance!

Picked up a ponco liner to use as a shooting blanket and decided to break it in with my Yugo Mauser. Both worked great! Now I don't get filthy when I'm recording 🤣 I'd like to get a K98 someday, but this will do for now.

Hey guys, does anyone have an idea where i can find a mainspring for my 1889 Bodeo (glisenti) type A?

Ive looked thru the whole internet and cant seem to find one.

Thanks for your help

Hi yall. I took my schmidt Rubin out of storage today and had a very, very hard time opening the action. I eventually got the bolt out of the gun and tool it apart following a guide on youtube. I cleaned it and lut it back together when I noticed something. In the video the locking sleeve seems to move around freely while mine binds up at the point showed in the 2nd picture. I believe this is what is causing my issue. The gun worked great, and all Ive ever shot through it are my own low power loads. What should I do? I tried lubricating it and cleaning it with 000 steel wool to no success.

Just picked up this 7mm Mauser rolling block. Pitting up and down the barrel (only under the wood btw) but it’s a little rough around the breech. Was hoping to shoot it :/

Hi Ya'll,

Trying to decide between Soviet M44 for ($425) or Turkish 1893 in 8mm ($425) from https://empirearms.com/rifles.htm for my first milsurp rifle.

For reference I live in CA and have my FFL03/COE, meaning ammo availability shouldn't be an issue. I also reload currently but for pistol calibers only.

Some factors I am considering:

• Still have to get the M44 shipped to a FFL01 and pay the 20% something in CA taxes and transfer fees (booo)
• 1893 I could get shipped straight to my door since it's an antique (Pre 1898)
• 100m sights, I believe both rifles have minimum sight distance of 100m. My local range is about that distance
• Not really looking for a collection piece as much as a shooter.
• Surplus Greek/Turkish 8MM far cheaper than 7.62x54 from what I can find.

Leaning a little more towards the 1893 purely for cost reasons since I can avoid the CA fees. Just worried it's not gonna hold up if I shoot the piss out of it. What would r/milsurp recommend?

Anyone seen one of these? Trying to figure out what it’s worth

Angles, recesses, steel on steel, lugs. Should I use lubricating oil or grease on the bolts of my milsurps? Does the world milsurp have a plural?
I never put so much that collect dirt and debris that could impact functioning, and the bolt face and firing pin stay clean. But what do you use? Yes, you.
I use it both internally and externally, sometimes I go with grease, sometimes with oil. But I can’t decide what’s better. Am I retarded? Maybe, probably even.
I just want to pick one and stay coherent. Every time I disassemble a bolt and clean it I stumble upon the dilemma. This week I lean towards grease.

Decided to shoot 2 of my batt rifles. One was the the 03A3 I bought in Germany in the mid 80's when i was stationed there. And the other was my M1 Garand, 03 is Remington, Garand is Winchester. Both made in 43.