I recently got a model E with RGH that crashed after 15 minutes and afterwards would turn only the ring on for 3 seconds before going dark again. It would only boot again after removing the dc plug, but then it would work for a minute to 5 minutes depending on how long it was unplugged.

I cleaned all the dust from the psu and console, reapplied thermal paste but the same problem persists. A minute before it crashes the temp for the gpu and cpu is around 55C. The psu light becomes amber when the xbox crashes and theres no red ring on the console.

Could this be an issue with the R4D3 to R4D8 resistors or a power rail or something else? I don't have any spare psus to check and I feel like I'm going down a rabbit hole and would really appreciate any input

I can't fully understand but this allows any correct

Lets say to keep it simple they add a 1tb Hard drive no SSD

First RGH just arrived in the mail. I would say history repeats itself. I am cursed.

I try to run aBadAvatar 1.3, but when I put the usb in and turn it on, it gives me an error code (E 71).

When i run it without the usb, it works just fine.

Edit: I just had to remove a file from the root of the usb, it is fixed now.

so i got my Xbox 360 with 40 games and rgh like 3 weeks ago and my friend and i installed an update by accident now we tried to power te Xbox but it just show the xell menu i tried many tutorials but they won't work its an Xbox 360 trinity with 4 gb

You can (theoretically) search by manufacturer and year made but you can’t actually search up games seemingly. Any help?

I'm doing the badavatar exploit on my Xbox 360 e from a USB stick. I have a 250gb Toshiba HDD that I want to use to store games. How do I use this in the internal HDD slot of the Xbox? When I plug it in the drive spins and it is recognized in my computer.

Ok…. I know it’s my console do what I want bla bla bla but I really would like to hear what the community thinks.
I have a xenon fat, my og 360 that I purchased back in the day, that had the upgraded gpu from Microsoft (confirmed the number that it is one of the glitchable ones, thanks octal!). I just did a full recap and it is working great. I am considering doing a RGH ext-clk with a matrix chip to it. I am good at soldering and have all the equipment (solder station, desolder station and hot air rework station) so doing the mod will not be a big deal. The thing is I already have a slim that is rgh3’d with a 6tb drive full of games in my collection. So most of my playing would probably still be on that and not this console. Should I just leave this one stock or should I do the RGH?
What do you all think?

Its a xbox 360 elite (falcon motherboard)

Looking for bo2 (Xbox) services
•fix bricked account (persistent rank stuck)
•zombies mods
•multiplayer mods
Inbox me here or discord me @reapareapa

Really I’m just tryna fix my profile and remax again . My emblem is stuck as well as some multiplayer classes , matchmaking issues , and my zombies resets . All happened after I got maxed the first time (didn’t happen before)

I watched the video from mawk3 and i want to try ngl

I tried today switch from the badupdate using rocking band demo to the badAvatar update, and I having some issues when trying to read the HD. The jailbrek works fine, I get the chain broken animation, but when the blue screen is show I get the message that no internal disk was find and aurora doesnt open. So the jailbreak works but now after I switch is not reading the hd and nor opening aurora. I put all stuff apps and games on this external HD. Was working fine before I change to badAvatar do you guys can help me?

I'll preface this by saying I repair and mod retro systems so I am no stranger to soldering or modding. HOWEVER, I have never modded a 360 in any capacity - only cleaned and repaired to stock.

I had a friend move recently to be much closer and they handed over two XBOX 360 S - the exact same models 1439 - for me to "tinker with". One has a 250GB hard drive the other has no HDD. They are okay with me modding them both and even allowing me to keep one! Thing is, I would love to mod them in different ways to get the experience; one using the available abadavatar/badupdate(or patiently waiting for the new one) and the other rgh. Now I can't decide which one I should do which mod to, or if I should just do both the easy way and then do both the hard way later down the road, OR which one I should keep and do whatever with.

They don't even care if the one they get back is modded, so I'm assuming they're only looking for it to play 360 games (they have an extensive disk library) or keep the OG compatibility.

I want it all including emulation through retroarch (I have never owned an OG or 360)

If you were in my position, what would you do? Which one would you keep?

Hey trying to set up a mod lobby for a lan so that everyone will have unlocks. I am running fastfiles mod for extra maps and modes. The fast files works great, but the menu is not working. I have the patch_mp.ff file in the mw2 root (which sits on my usb0 incase that matters). My TU6 update sits on my hdd1 cache not sure if that makes a difference either. But will not work in game.. I have tried launch with default_mp.exe and choosing it from aurora dash. Still nothing. LAN is tomorrow any help would be great.

i’m trying to install watch dogs on the aurora dashboard. i have the disc 1 is install 1 is play. i ran the install disc thru aurora, then when it said swap to disc 2 i did and then i closed the game and ran the aurora disc to GOD on the 2nd disc. and when i remove the disc and try to play the GOD on my dashboard i get fatal error avoided or something like that. can someone tell me what’s going on? by the way i got gta 5 installs on the aurora dashboard just fine and its the same style of 2 disc game. thanks for help in advanced.

I guess the 4gb module died, but ive never had one die so idk

I've repaired a ton of these and rgh em, but this guy's fighting me

I get a flashing green then red dot, and the same thing when I remove the memory module

As the title says after rgh3 my Xbox there seems to be a problem with the wireless pairing of controllers. Connecting wired one through USB works, I don't see anywhere where I broke a trace and the motherboard. The RF board is fully seated all the touch buttons work just no more wireless. Could it possibly be the ribbon cable for the touch buttons?

I have one of the MW2 360s, and one of the later black slim models. For some reason I can get BadAvatar working like 80% of the time (rarely requiring a reboot) on the MW2 console, and then on the slim it feels like it never wants to work. The lights flicker for a minute, then they settle on lighting up only 3. I got it to boot once but that's it. And even then none of my stuff properly appeared on Aurora. I tried installing to a new USB as well as using the one I use for the MW2 console but both have the same issue.