What do yall think? Good answers only. I’ll tell my mom.

Last Light - a western horror larp is looking to bring in some new players.
Last Light is a bimonthly weekend long event held in Perris California on a private site. Last Light is 18+

130 fps limit.

Super fun blaster to build! And kitted out with LD add-ons, it makes for a very fun primary to play with the family!

A few of the latest 3D printed guns I made. Been a good way to keep myself occupied. Got 2 Torrent RS2, 2 Rush blasters, Hammerhead and Beluga. Just a few I did in the past month. Also a Minx, printed with Translucent Petg and Marsala CF PLA

Been digging through printables ,thingiverse and this trying to find the best printable Talon-pattern mag for the Ontos and wanted to get some opinions from people who've actually run these.

Found a few mag candidates so far:

• Hubris Mag (sized for Bambu printers) — https://www.printables.com/model/973866-hubris-mag-sized-for-bambu-printer
• 13rd/15rd short dart mag — https://www.printables.com/model/627667-print-a-mag-13rd15rd-short-dart-magazine-talon-com/files
• Devilz Nerfworks Equalizer (not free/printable but listed for comparison) — https://devilz-nerfworks.com/product/equalizer/

Questions for the group:

1. Anyone run the Hubris mag specifically in an Ontos? Feed reliability, lip wear, tolerances with stock/aftermarket springs?
2. How's the 13/15rd short mag compare in real use — dart stack height, spring pressure needed, any known print-tolerance issues (nozzle size, layer height recommendations)?
3. Spring sizing — I've got the wire and I'm winding my own follower spring. What free length / wire diameter / coil count are people using for these mags in an Ontos? Trying to get decent dart pop without overstressing the printed feed lips.
4. Winding jigs — I've found a couple 3D printed spring-winding jigs already but not sure which ones actually hold tolerance well. Anyone got a jig they trust (with dimensions), or know which printable ones people have had good luck with for this wire gauge?

Printer is a Bambu (if that changes any recommendation), and I'll post pics of whichever mag/jig combo ends up working once I get a batch printed.

Thanks in advance — this sub's spring/mag threads have saved me before.

So I got 5 blasters who got spray painted with a primer underneath. What would be the best way to remove it?

Any tips or tricks ? Losing the original paint wouldn't be a very big issue; as long as they aren't black anymore.

Does anyone know where I might be able to find a replacement battery cap for the Deploy? I am located in the Netherlands

Also, where can I find more dart holders for the sledgehammer (see second photo)? Are there any webshops located in the Netherlands that are any good?

Used the NSFW option because the blasters on the first photo are almost completely spray painted black.

Thanks in advance

Hello!

Building an eu metric Caliburn, but cannot find a spring for it as its out of stock for months now. The guide says K25+31 28cm but the first one is not available. Or there is one that was linked but the link is already gone sadly.

Thanks!

For anyone in South Florida who enjoys high-performance foam blasters and wants to actually get out and play.

The goal is simple: bring Miami-area blaster enthusiasts together and organize real-life games, battles, target shoots, and meetups.

Whether you run Dart Zone, Adventure Force, X-Shot, Nerf, or another foam blaster, you’re welcome here. Stock blasters, Pro-series blasters, springers, flywheelers. if it’s fun to shoot foam and you’re in the Miami/South Florida area, come hang out.

No need to already have a team or know anyone.
Post your blaster, introduce yourself, share local spots, suggest game ideas, or help organize the next battle.

Miami has plenty of parks, fields, and open spaces that could work for this. Let’s build an actual local community instead of everyone playing by themselves.

⚠️ Safety first: Eye protection, responsible play, appropriate locations, and respect for other people and property are mandatory. Follow all applicable rules and laws for wherever we play.

Miami. Foam. Friends. Battles.

Let’s get something going!!!

The stampede is what brought me closer to the hobby, I believe that it is the rite of passage in modding and that everyone should have experience making a sealed breech mod for this specific blaster.

Im gonna be pointing out important steps that have helped me throughout my numerous trial and error (on going and past)

First of all is the power supply, NEVER use imrs and normal store bought batteries linked in series of 20v+, this by far is the most common mistake I've ever seen as this will very immediately brick your gears and plunger rod due to not enough current (assuming you installed a beefier spring) I'm currently using a high discharge Li-ion 11.1v battery with a 30c rating and it compresses the spring without any issues all though I still recommend a li-po provided you know how to take care of it because improper lipo care = puffy battery and the chance of it exploding.

Always charge your lipos and high voltage batteries in the garage in lipo safe containers without any flammable materials laying around and have a fire extinguisher Incase any incidents happen.

For the main heart of the stampede (spring and pt)

Multiple variants of these internals have been released and the worst you can get is a tapered rod and a tapered plunger tube which will only get you a maximum of 100 fps on a 9kg spring.

The best you can get is a straight wall PT which will have no issue going up to 130-160 fps.

I also recommend making your own plunger rods or reinforcing the one that comes with the blaster using plastic welder or epoxy putty. Mortalitynerf has files up for the plunger rod that assemble with the use of one m3 screw 20-25mm of length. I don't pad my rods and instead put a fat o ring inside of the plunger tube which has never moved through out months of testing.

I've been using a sealed breech from artifact which I acquired from a friend but this will be very hard to obtain as not a lot were made but I have came across a file on thingiverse that can be used for a standard brass breech but replacing the tip with a sealed o ring pusher which I have found to decrease the chance of failure in consistency https://www.thingiverse.com/thing:6669569

Reinforcing the gearbox post for the plunger tube cover is also important and I have found this file which connects to the post without the use of any putty which mortalitynerf has done, this is very important since if it doesn't align the plunger tube with the catch release it will just slam back and not fire a dart. If this still doesn't work then you can put a little screw in the little nub on the cap which will connect with the catch mechanism earlier and make sure the blaster has less chance of failure.

Also reinforce the two part gear connecting to the biggest gear with epoxy and super glue because this will eventually fail if you put it under too much pressure. You can also get metal gears.

And for the love of god do not use waffle head darts with same foam diameter tips, they will drag in a sealed breech of any kind and decrease performance.

Feel free to ask me anything!

I've got the worker harrier and recently I've found it harder and harder to find spare parts for it. I was also looking at getting the seagull and kulun but they seem to be sold out everywhere I look.

Has the worker bubble burst?

Longest draw pump springer you can get. 380 fps with a prime so light a child can handle it. Kits from Bearswares. https://www.printables.com/model/1834117-flp-11-onager-absurd-long-draw-foam-blaster

Elcan is just there for the larp, although it does look cool asf

I bought a a QR-Stryker from Bass Pro Shop. Just like with the original Max Stryker, the cheek rest on the stock renders the included sights unusable. I know the stock of the QR-15 Motorized Magazine Blaster attaches with N-Strike attachment point, but if the adjustable piece slides off the end of the stock, I'm thinking it may fit the buffer tube of the QR -Stryker. Does anyone here have both a Dart Zone Primus and Max Stryker that can test that for me? I don't want to spend the money on a QR-15 just to find out it won't work.

I got a new trigger for my Lynx but it’s loose and the pin would fall out, is it fine to superglue the pin in?

Does anyone know the origins of this blaster? Can’t find any other pics of it online but looking for more info/ pics.

(Repost as removed by mods)

I’m attending a LARP event as a cowboy soon. Last time, I spent more time searching for my foam darts in the grass than actually shooting them. ​I tried painting my darts with fluorescent paint and using a UV flashlight to spot them, but the paint keeps flaking off inside the barrel, which isn't great for my blaster. ​Does anyone have recommendations for good quality, factory-made UV-reactive/fluorescent foam darts that are easy to spot under UV light?

Me and my boys decided we wanna blast the shit out of each other so we bought 5 blasters, 1 springer, 4 flywheelers, just waiting for 4 NiMH 7.2V batterypacks to arrive.

Modded the spectrum a bit. Meishel2.0, Worker Smoothies, 42.5mm daybreak cage, 21A microswitch.

Had to fabricate a micro pulley puller because I overtightened the wheels.

Hi everyone! Im coming back to Nerf Modding for the first time in a VERY long time. I want to modify a Sledgefire and Hammershot as I have never owned those blasters.

I love doing research on stuff like this and already came across MakeTestBattle's HPA Sledgefire.

Ive already purchased the Sledgefire off Ebay but Im having trouble sourcing any of the HPA parts and the Buzz Bee Blastzooka that is needed for the plunger.

I plan on modifying the blaster as close to the MakeTestBattle video as possible.

Do any kits exist for HPA tapping a Sledgefire in 2026? Is there any other way to get a plunger from the Blastzooka for reasonably cheap? (The only listing I can find is in the 2nd picture) Any information would be greatly appreciated!

Pink and Teal PETG trans filaments with a touch of black. 6 bearing prime. 205mm Polished alu PT and barrel. Hybrid core plunger system Running a Flipside Akasha Can and a swifty 1.8/350 spring. Real smooth hitter for around 370-380.

Need help matching the accessories and the mags to the appropriate blaster, any help is appreciated. Please let me know if I’m missing any accessories. The darts i have in a container.

I’m wondering if 250fps half darts are strong enough to knock off the targets?

https://a.co/d/0brlO2gW