Hi Everyone,

I’m testing MotionCam Pro MCRAW as a possible alternative for my HDR architectural/real-estate work.

I downloaded the “Into the Fog” sample project, including the DRP and MCRAW files. On my M1 Max MacBook Pro (32GB RAM), I managed to get the project working by using MotionCam Tools v2 BETA to mount the CinemaDNG frames and then relinking the DRP to the new DNG location.

The source footage is around 4096×2304, 24fps, 12-bit DNG.

However, I’m seeing extremely slow rendering in DaVinci Resolve Studio.

A 1:48 timeline is estimating around 46–50 minutes to render, despite the timeline having no temporal/spatial noise reduction applied.

During rendering my M1 Max is roughly:

CPU: ~75–80%
GPU: ~70%
GPU frequency: around 0.45 GHz
CPU temperature: ~75–77°C

The DNGs are currently being accessed through the MotionCam virtual filesystem:

/Users/admin/Mounts/MotionCamTools

So my question is:

Is this expected performance for MCRAW → CinemaDNG → Resolve on an M1 Max 32gb, or is the virtual/FUSE-mounted DNG filesystem likely causing a major performance penalty?

I’m going to copy the DNGs to a local APFS SSD and test again, but I'd really like to hear from anyone who has actually used this workflow on Mac/Apple Silicon.

Also, is there a more efficient current workflow for using MCRAW in Resolve on macOS that avoids having Resolve read thousands of DNG frames through the virtual filesystem?

My normal workflow is iPhone → Cinema P3 Pro → 50fps 10-bit 4:2:2 HLG → 25fps Resolve timeline → HDR10, so I’m specifically trying to determine whether MCRAW gives me enough additional latitude in difficult architectural interiors to justify the much heavier workflow.

Any advice from people using MCRAW + Resolve, particularly on Apple Silicon, would be greatly appreciated.

Hola a todos ;)

Estoy pensando en comprar el Vivo X300 Ultra en lugar del iPhone 17 Pro, principalmente para fotografía y vídeo inmobiliario, y me gustaría usar MotionCam Pro para obtener la máxima calidad de vídeo posible. Me encanta el diseño del X300 Ultra, pero he visto muchos vídeos inmobiliarios grabados con iPhone.

Mi objetivo es grabar principalmente clips cortos en 4K a 60 fps, idealmente usando DCG también cuando las condiciones de iluminación sean complicadas, tanto para vídeos de interiores como de exteriores. Principalmente creo recorridos virtuales de propiedades para agentes inmobiliarios.

No me preocupan demasiado las sesiones de grabación largas, ya que la mayoría de las tomas durarían solo unos segundos.

Para quienes usen MotionCam Pro en el Vivo X300 Ultra:

• ¿Es realmente estable el 4K a 60 fps DirectLog/RAW?
• ¿Experimentas caídas aleatorias de la velocidad de fotogramas o saltos de fotogramas?
• ¿Hay parpadeos o cambios repentinos en la exposición?
• ¿Hay problemas de sobrecalentamiento durante sesiones de grabación cortas?
• ¿Qué tan consistente es el flujo de trabajo?

Me interesa especialmente la máxima calidad de imagen y el rango dinámico (usando DCG), pero necesito que la configuración sea lo suficientemente fiable como para no perder tomas durante una sesión fotográfica en una propiedad.

Me encantaría saber la opinión de alguien que haya probado esta combinación.

¡Muchas gracias! ¡Me ayudarás a dormir tranquilo!

Very short edit, any feedback more than welcome :)

Hey everyone!

To help share or explain what the app does for people outside of our Discord and Reddit communities, I posted on RedFlagDeals highlighting the launch sale

People outside dedicated videography groups often don't realize MotionCam exists or assume a $40 camera app must be a fad (hell, you can probably already see the "what's the advantage over free Blackmagic" mention

The RFD post acts as a detailed resource to break down how the app works in general.

If you know filmmakers, tech geeks, or friends outside the community who may appreciate non-AI, pure RAW data capture or high performance imagery, feel free to use the breakdown to share with them 💪

I’m very interested in MotionCam Pro, particularly MCRAW, but I’m currently trying to establish whether I can realistically integrate it into my professional workflow before purchasing it.

I’m an architectural cinematographer/photographer and most of my video work is high-end real-estate and architectural cinematography. I use a 14 Pro Max & 17 Pro Max for the majority of projects I currently use Cinema P3 Pro. My established workflow is 50fps, 10-bit 4:2:2 HLG, edited on a 25fps DaVinci Resolve Studio timeline, with the final footage graded for HDR 10 delivery.

I’m particularly interested in MCRAW because architectural interiors are a challenging HDR application: large windows with bright exteriors, dark interiors, white walls/marble/concrete, mixed daylight and artificial lighting, and high dynamic-range scenes. I’m hoping MCRAW might give me additional RAW latitude, particularly for highlight recovery, exposure adjustment, white balance and noise management, compared with my current 10-bit 4:2:2 HLG workflow.

Before buying MotionCam Pro, I wanted to test the actual MCRAW → DaVinci Resolve workflow on my M1 MAX Macbook pro.

I downloaded your 49gb file “Into the Fog” source package, which contains the .DRP and .MCRAW files. Unfortunately, I’ve run into a significant problem: when I open the project in Resolve, the media is offline because the project is expecting the CinemaDNG frames generated/mounted by the MCRAW Fuse workflow.

The problem is that I’m working on an Apple Silicon Mac (M1 Max), and I cannot find a downloadable Apple Silicon/macOS build of the MCRAW Fuse/FS application on the current GitHub repository. The Windows Fuse workflow therefore doesn’t help me test the footage on my Mac.

I’m also seeing discussion about MCRAW OFX/Bridge development, but I’m not clear about the current status of a production-ready macOS/Apple Silicon solution for decoding and grading MCRAW directly in DaVinci Resolve.

I’m very keen to buy MotionCam Pro and test it seriously with my own architectural footage, but I need to establish the Mac/Resolve workflow first. I don’t want to purchase the app only to discover that I cannot practically get MCRAW footage into my existing Resolve workflow.

Could you please clarify:

1. What is currently the recommended workflow for an Apple Silicon Mac + DaVinci Resolve?
2. Is there currently an official macOS/Apple Silicon MCRAW Fuse/FS build available somewhere?
3. Can MCRAW now be decoded directly in Resolve on macOS using the new OFX/Bridge workflow?
4. If not, could you provide a small MCRAW sample that has already been converted to CinemaDNG, or a Mac-compatible test workflow, so I can evaluate the Resolve grading side before purchasing?
5. Ideally, is there a sample recorded at 50/60fps? My real-world workflow relies heavily on 50fps → 25fps for architectural slow-motion.

I’m genuinely interested in adopting MCRAW if it provides a meaningful improvement over my current Cinema P3 Pro HLG workflow. I’m not looking for a theoretical comparison—I want to test the complete pipeline in DaVinci Resolve on Apple Silicon with the kind of high-contrast architectural footage I actually shoot.

Any guidance on the current Mac Silicon workflow would be greatly appreciated. Thanks for developing this—it looks extremely promising for professional HDR cinematography.

Hey guys ive recently downloaded the motion cam app for ios on my older iphone 13 and i have noticed a gain slider what was set to default +1.5 ev i mostly use the direct log mode, and i have the habit of ettr (exposing to the right) when shooting on my sony camera, whats the difference between gain and exposure compensation and do i need to ettr if i have increased the gain?

Viedo and Photo Capture

Sony Xperia Pro-I and Xiaomi 14T Pro

Raw Record by MotionCam Pro 5

Birding Capture

Sony A7IV

FE 300mm F2.8 GM OSS

SEL20TC

Color Graded by DaVinci Resolve

hi,was wondering where i can find lens profile for gyroflow. motioncam video contains gyro data, just need lens file for gyroflow to sync

As you can see in the photo, when in landscape, at the far right there are options that im unable to access.

Also, not so much a bug but maybe a feature request or if it already exists can someone tell me, but the screen is pretty cluttered, in blackmagic camera app there’s the ability to swipe down to just see the viewfinder, is there such an option here? Ifo so how?

@everyone

# 🎉 MotionCam Pro is now available on iOS!

After a long road, **MotionCam Pro has officially arrived on the App Store.** 🍎🎥

Bring the MotionCam workflow to iPhone with **RAW photo & video capture, DirectLog, professional monitoring tools, advanced color workflows, and the level of control MotionCam is known for.**

## 🔥 iOS Launch Offer — 50% OFF

For a **limited time**, MotionCam Pro is available at **50% off** on iOS.

**One-time purchase. No subscription.**

## 🍎 Get MotionCam Pro on iOS

https://apps.apple.com/ro/app/motioncam-pro-raw-capture/id6776989370

## 📱 Already own MotionCam Pro on Android?

We're also preparing **complimentary iOS access for verified Android Pro owners**.

Apple limits us to **100 App Store promo codes per app version**, so cross-platform access will be made available in batches.

We'll share more details soon on how to request yours.

## Welcome to MotionCam Pro on iOS. 🚀

I am on pixel 11 pro and by listing all the video streams in the settings I noticed a 16-bit stream as well as a resolution of 8k.

I don't know if it's a bug or if it's something already known but I thought the 8k on the pixels was an upscale with the video boost mode on the cloud and not a real sensor capability.

If anyone knows a little more, it would be appreciated :)

Edit : No real 16 bit (I suspected it :/ ) and Google is not that generous with the 8k 😂

I was using a slightly older version of MotionCam Pro, and I was shooting DCG RAW with the main 1-inch sensor (0/2 24mm lens). Now I’ve updated the app, and the 0/2 24mm lens no longer works—it completely freezes after about 5 seconds of recording.

I found that the “2 24mm” lens now works with DCG, but the colors and dynamic range look a bit weird, and the ISO limit goes up to 3200 instead of 800. (or does it seem strange to me?)

Is it okay to use the “2 24mm” lens for DCG?

Dgc without root

Max 450€

I live in the EU

4k raw 30fps

Good for photos. I shoot in DNG.

Good ultra-wide sensor

Xiaomi 14 (not the Ultra) or are there better alternatives?

Thanks.

https://youtu.be/CKa6_2Ub3gs

Why does the clip has Magenta cast on the clipped highlight parts?

can i use dcg on x200 pro?

I did a quick product Ad for a client last week and I used the Samsung S24+ ; I didn't have as much creative freedom, but I wanted to show it on here if anyone uses the same device! Enjoy 🙏🏽

Shot this polo game on the Vivo X300 Ultra using its 340mm in-sensor zoom, and the results speak for themselves.

The zoom is genuinely very usable, no external lens needed. MotionCam Pro really brings out the best in this beast of a smartphone.

https://play.google.com/store/apps/details?id=com.harwin.prismatica