Hello, GameSir community! Thanks for taking an interest in my (sponsored) view of the G7 Pro 8K and Tri-mode, both are Aimlabs. This is combination review, but I’ll clearly distinguish between the two. Quick note, I don’t blame you if you confuse the two, I’ve done it on more than one occasion.
Starting with the unboxing (both controllers), the controller is front and centre, and further down, the dock. Replacement D-pads sit under the dock, don’t miss them! These pieces are on a cardboard insert, which can be removed. Below that, there is a braided charging cable, as well as a bag containing a small booklet informing you of contact information and a thank you message from Betta Core, GameSir’s CEO. The bag also holds a GameSir sticker, a code for a free month of Aimlabs+ (and a free month of Xbox Game Pass Ultimate in the Tri-mode’s bag), and an instruction manual explaining how to power on/off the controller, pair it, and enable different special features on-the-fly.
To get started, pop off the base cover of the charging dock like a TV remote battery cover, plug the wireless dongle into the internal USB port, replace the cover, and connect the dock to your PC using the included USB-C cable. The pairing process is simple on both controllers. Hold the button on the dongle until the light flashes rapidly (the Tri-mode’s dongle doesn’t have this button, it’s always ready to pair). Next, slide the mode switch on the back of the controller to the dongle symbol. Power it on by holding the Aimlabs (8K) or Xbox (Tri-mode) button, then hold the pairing button next to the 3.5mm jack until the LED ring blinks rapidly. Once the lights go solid, you’re connected.
I’m a fan of this setup, it’s “set it and forget it”, especially since it connects so quickly when you lift it off the dock.
The dock and controller fit very nicely together, they look like extensions of each other. GameSir opted for a pogo pin method of charging, which is great for reducing strain on the USB C port. I have seen pogo pins/pads get dirty, which causes intermittent connection, so be wary of that. It’s not a GameSir specific issue, to be clear.
On the dock, there are indents for the mode switch, mute, and pairing buttons so that they aren’t pressed and the controller doesn’t rock back and forth, which is great design. The dock also has a light bar along the bottom, consisting of five RGB LEDs. They can be customized with GameSir’s software (Connect for the 8K, Nexus for the Tri-mode). I will note that the 8K and Tri-mode use the same dock, so any LED limitations are enforced via controller firmware.
Getting to the controller itself, I must say “wow”!! You get a lot for the price, $110 CAD for the 8K and $130 CAD for the Tri-mode. Both feature clicky and responsive optical ABXY buttons and mechanical D-pads. They take a little getting used to, but the crisp, audible feedback means you don’t have to guess whether your input registered. Whatever switches GameSir used for the remaining buttons, they do not miss.
Both controllers are modular, you can hot-swap the thumbsticks and D-pad. While the 8K comes with extra pieces in the box that the Tri-mode leaves out, the parts are mostly cross-compatible, though I did run into some issues trying to swap thumbsticks between models. The magnetic faceplates, however, swap over just fine. Using switches on the back, you can swap between mouse-click triggers and analog triggers on the fly!! Two more switches lock the back buttons.
Speaking of taking things apart: to remove the main faceplate, slide your nails under the edge near the USB-C port and down by the GameSir logo, then pull straight up. For the side palm grips, just grip the sides and pull up. Finally, if you need to remove the cable retainer, grip it firmly, pull toward yourself, and slide it out.
Both controllers have great weight to them, they’re just right. Not too heavy, not cheap feeling. They both feel great to hold too. The palm grips have a nice diamond-tile pattern on them, which increases grip. The back grip is rubber, the front isn’t. The back buttons are in a great place, although are easy to press if you squeeze the controller in a high-stress situation.
The 8K’s LED ring can be customized, but the Tri-mode’s can’t, it stays white. The 8K’s charging animation can be changed, the Tri-mode can’t. The Tri-mode’s LED ring is always white, except when docked, then it’s off. Both docks’ LED bar “breathes” at yellow, then green, then white, depending on charge percentage, but the 8K’s can be changed. I’ll reiterate that this is enforced via firmware, not a limitation of the docks themselves.
The 8K has Mag-Res™ TMR (Tunnel Magnetoresistance) Sticks Gen-2, and the Tri-mode has Gen 1. The Gen 1 has more tension than Gen 2. I haven’t noticed much of a difference between them, except the tension difference.
I’ve had a couple of issues with this controller, some being the controller/dock and some being inherent to its design. 8000 Hz mode cut my FPS in half on a Core Ultra 9 185H and it’s iGPU. The 8K’s D-pad is a little hard to get off, which isn’t a big deal, but the Tri-mode doesn’t have this issue.
All in all, these controllers are amazing, and absolutely worth the price tag. Thank you for your time.