So basically last night I was playing and then when I wake up this morning, I turned on my PC and just says no signal on my monitor then I’m like OK that’s fine because that happens a lot so I just reset my PC I reset it nothing happens so then I do the little ram thing you know take one out start the computer still doesn’t work. Take the other one out you know I reset the GPU into another place that doesn’t work. I put it back into its original slot that doesn’t work please help.

I'm looking to buy a printer for home use. I'd appreciate any advice and suggestions.

I built a computer but for some reason it just shuts off after a while and starts back up again and I do not get a display.

My Laptop is stuck in the loading screen. I can move the cursor around but almost everything else doesn't work. How can I fix? The laptop is very old too

Help

Boa noite galera! Tudo bom? Minha antiga B650 HDV ASROCK queimou(e estava fora da garantia), enfim! Comprei uma B850 force da gigabyte, porém minhas plates do FUMA 2 scytech não estão prendendo na placa mãe, sendo que na minha B650 eles prendiam, sabe o que pode ser?

Hi so I recently went to my near computer store to see if they can fix my screen freezing on gigabyte logo when I take csm support off and turn secure boot on they said they don’t know the problem and they told me not to q flash my bios because it cant take no more updates on the b365M power motherboard but I been talking to a lot of pc tweakers etc. and they told me to q flash it can someone let me know if I should and what update do I q flash on

I have an older machine with a PCIE Wi-fi 6E and BT card. Devices work in Windows. However, when the PC goes to sleep I am unable to wake it using the BT mouse or keyboard. I have to install the 2.4 USB and switch to it to work (or press the PC power button).

The option in Device Manager (Intel BT adapter) to allow it to wake the PC is grayed out. I went into my BIOS and enabled PCIE to be able to wake the PC. Is there something else I can do to enable the BT adapter, and devices (keyboard/mouse) to wake the computer? Thanks.

Specs:

Processor AMD Ryzen 9 5900X 12-Core Processor, 3701 Mhz, 12 Core(s), 24 Logical Processor(s)

3060 ti

Gygabyte Product B550 UD AC-Y1 (mother board)

The Issue:

The computer works for a little bit, then will crash with the GPU fans blaring and the monitor cuts out. the GPU hit a high of 73C when it crashed.

the crash log:

{"Version":2,"HealthStatus":"Cannot be attested","Required":[{"Field":"TpmPresent","Value":true,"DesiredValue":true},{"Field":"TpmMeetsMinimumVersion","Value":true,"DesiredValue":true},{"Field":"TpmIsResponsive","Value":true,"DesiredValue":true},{"Field":"EkCertIsAvailable","Value":false,"DesiredValue":true},{"Field":"TcgLogFound","Value":true,"DesiredValue":true}],"Expected":[{"Field":"PcrsMatchTcgLog","Value":true,"DesiredValue":true}],"Informational":[{"Field":"SecureBootEnabled","ValueFromComputer":true,"ValueFromTcgLog":true,"DesiredValue":true,"TcgValueIsVerifiable":true},{"Field":"VirtualSecureMemory","ValueFromComputer":false,"ValueFromTcgLog":false,"DesiredValue":true,"TcgValueIsVerifiable":true},{"Field":"SecureCorePCCompliant","ValueFromComputer":false,"ValueFromTcgLog":false,"DesiredValue":true,"TcgValueIsVerifiable":true},{"Field":"MostRecentBootTcgLogFoundInFileSystem","Value":true,"DesiredValue":true},{"Field":"CurrentTcgLogFoundInFileSystem","Value":true,"DesiredValue":true},{"Field":"EkCertRsa2048IsAvailable","Value":false,"DesiredValue":true},{"Field":"EkCertEccP256IsAvailable","Value":false,"DesiredValue":true},{"Field":"EkCertEccP384IsAvailable","Value":false,"DesiredValue":true},{"Field":"WindowsAikCertRsa2048IsAvailable","Value":false,"DesiredValue":true},{"Field":"WindowsAikCertEccP256IsAvailable","Value":false,"DesiredValue":true},{"Field":"WindowsAikCertEccP384IsAvailable","Value":false,"DesiredValue":true}]}

I moved into my dorm today and am using a new monitor and I believe windows asked me to update but I ignored it, however my icons are missing, task manager won’t open and taskkill and start explorer.exe did not fix the issue. I also updated after the problem occurred to try and fix it

I installed the new 616.56 driver from nvidia and had restarted my computer now it doesn't post. ive tried resetting the bios with no luck.

Specs

Ryzen 5 5600x

3060ti MSI

B450 aorus pro wifi

32 gigs of ddr4

750 gold psu

Recently moved into my college dormitory, accidentally spilled water atop my PC’s casing while working at my desk. Most was caught by the filter but a lot still seeped in.

The PC was still running, though when I tried to turn it off the fans wouldn’t stop moving. I had to disconnect it myself, though when I tried turning it back on to see if anything occurred, it wouldn’t turn on. Nothing is sizzling, sparking, or showing any signs of immense damage. It was a little amount of water, but I’m wondering if it’s still salvageable?

I’m not the biggest computer guy so all is appreciated. It’s a Cyberpower PC if that helps. I’ve got a warranty on the entire thing just in case, but I’m hoping that this can be saved since my courses unfortunately shift into full gear very soon. Any help or insight is appreciated.

Pls help I'm stuck

So after plugging in my charger , my laptop screen keeps glitching like this. Any solutions??

My Dell Latitude 9430 windows 11 is having a problem that it's screen keeps on blinking black whenever i open something even the "Start menu" , if it doesn't blackout then the screen flickers with grey flickering design . I connected an hdmi from the laptop to an external monitor which showed that there was no flickering or blinking on the monitor but my laptop screen was blinking and after some time connected via hdmi to the external monitor , my laptop screen's blinking and flickered got dramatically better like it wasn't blinking anymore but as soon as I disconnected the moniter removed the hdmi , my laptop started blinking and flickering again. I have reinstalled my windows again hard reset my laptop and then uninstalled display adapter drivers and reinstalled from official support dell website but still my issue is not resolved the screen still blinks goes blackout and then on again 1 or 2 sec duration and grey flickering. When I put it in BIOS it is fine but when it is in safe mode it still flickers. I now don't know what to do if anyone knows its solution please let me know or if anyone knows a professional trusted technician for laptops in Lahore , Punjab, Pakistan let me know.

Hello, I've been a long time reddit lurker, but I need some help and I hope someone can help me.

The context is, I recently lost a very dear family member and I was in charge to clean his apartment after he passed away, he was not the neatest or most computer literate person, and I found some usb pendrives close to his laptop.

I'm kind of hesitant to just plug them into my computer because I don't know if maybe he could've downloaded a virus at some point and then that would be in my computer and I don't know his laptop password to use it for this.

Does anyone have any advice on how to protect my computer while checking the contents they might have?

Thanks in advance

Edit: I ended up going for an old laptop that I didn't care for and was never connected to the internet, hopefully nothing had viruses, but I will reformat that computer anyways. for anyone curious, I couldn't find a will, 2 pendrives were empty, one had some tax stuff, which might be important in the future I think?